Search:

Type: Posts; User: Dech

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Thread: Error 061-319

    by Dech
    Replies
    10
    Views
    581

    Re: Error 061-319

    Check your ribbon cables to the ros (lazer) unit.
  2. Thread: C60 code 093-317

    by Dech
    Replies
    5
    Views
    581

    Re: C60 code 093-317

    If the toner is blocked, it blows F10 fuse on the iot Pwb and the toner motor sometimes burns its brushes. if this happens replace iot and motor... Check the seal on the inner cover( the toner falls...
  3. Replies
    4
    Views
    313

    Re: Xerox DC IV-C2263 error code 093-320

    I've had( look at the attachment, no 9) a tooth break on the no 9(link guide assy) in attachment. Its a black slider shaft that engages the colour dev units. Or the clutch in the no 2 ( main drive...
  4. Replies
    3
    Views
    411

    Re: xerox v80 error code 024-925

    Does your cyan toner cartridge feed motor run?

    If not, check your F3 on your paper handling (iot) pwb... it could be blown...

    45333
  5. Thread: Xerox D110

    by Dech
    Replies
    6
    Views
    1,693

    Re: Xerox D110

    Australia machines have the software keys in the hideaway hole in the tray, not sure were you store yours. If we loose ours, we get them from our web portal...
  6. Replies
    3
    Views
    887

    [Error Code] Re: xerox v80 error code 044-383

    044-383 PH F3 Fuse Fail file:///C:/Edoc/common_e2/images/full_a.gif file:///C:/Edoc/common_e2/images/memo.gifBsd-on:CH1.14, CH1.6, CH9.19file:///C:/Edoc/common_e2/images/description.jpg Fuse3 on the...
  7. Thread: Xerox D110

    by Dech
    Replies
    6
    Views
    1,693

    Re: Xerox D110

    Its your BP Pwb. as in attachment
  8. Replies
    3
    Views
    694

    [Error Code] Re: xerox 700 error code 041-346

    094-321 1ST BTR Contact FailThe 1ST BTR Cont/Ret Sensor has not detected Contact(H) the specified time (2400ms) after the start of the operation of contacting the 1ST BTR.

    Initial-action

    Check...
  9. Replies
    1
    Views
    1,393

    Re: xerox C75 with error 093-314

    093-314 Dispense Broken Y
    The system detected that the Dispenser is damaged.


    The Dispenser Y motor has got damaged- replace the dispenser motor and reset ( test the fuse on the IOT Pwb and make...
  10. Replies
    1
    Views
    2,737

    Re: Xerox SC2020 Developer Reset

    Printer Diag > Parameter > Life > Deve HSG PV and it initializes the Life Counter.
  11. Re: Fuji Xerox DocuCentre-V C2265 not recognising lower paper trays

    hi

    Check and change your NVM:

    742-205 =

    0- 1tm
    1-3tm
    2-2ttm (3 level}
    3- SRA3_3TM
  12. Replies
    10
    Views
    7,039

    [Error Code] Re: xerox versant 80 error 099-339

    try this

    see attachment
  13. Re: Scanning Issue with Xerox Phaser 3635 and Win 10 ver 1830

    This is what I do to all my old Xerox machines using SMB 1 for scanning...

    it works all the time...

    To enable or disable SMBv1 on the SMB server or PC,
    configure the following registry key:
    ...
  14. Replies
    9
    Views
    3,775

    Re: Fault code 091-311 Xerox 4110

    Hi
    Go back and make sure you have not missed any plugs....
  15. Replies
    8
    Views
    8,812

    [Error Code] Re: Xerox 560 error 093-314

    Hi

    a new inner cover has come out just for this problem..

    802K65485 Inner cover assy..

    If you keep getting error 093-314, run the dispenser motor, if dead, replace motor and add inner cover...
  16. Replies
    9
    Views
    3,775

    Re: Fault code 091-311 Xerox 4110

    Hi

    Had same problem:

    Changed the AC power supply..

    problem solved..

    Part: 105E17761 AC UNIT (200v)
  17. Replies
    2
    Views
    584

    [Jamming] Re: Paper jam when print color on 7780

    Hi

    set NVM: 742-180 to 1

    problem solved.
  18. Replies
    8
    Views
    2,094

    Re: Xerox 700 Fuser Temp

    Pleasure......Raises the temp.... try it, you will see a big difference...
  19. Replies
    3
    Views
    1,292

    Re: Xerox Versant Jam After NVM INT

    742-367

    Paper Type Detection Limit (Transparency Operation Limit)

    Sets the Paper Type Detection Limit (Transparency Operation Limit). 0: Can operate, 1: Cannot operate
    This parameter is fixed...
  20. Replies
    8
    Views
    2,094

    Re: Xerox 700 Fuser Temp

    Change NVM location 740-043 from 0 to 1 to enable Coated Mode for
    stock weights above 176gsm:
    a. Access tools mode by selecting the “Log in/Out” button on the
    UI console.
    b. Enter 5 ones (11111)...
  21. Thread: 091-320

    by Dech
    Replies
    2
    Views
    2,408

    [Error Code] Re: 091-320

    Had this error code, tried the connectors and leads, tried a hvps. Turned out to be the A.C PWB...
  22. Thread: error code 10-320

    by Dech
    Replies
    3
    Views
    4,221

    [Error Code] Re: error code 10-320

    745-416=0
  23. Replies
    5
    Views
    2,135

    Re: Xerox D110 fault 078-100

    My (020K 10940
    One Way Clutch Pulley (39T) x2 were the problem to my jams. replace both of them..
  24. Replies
    41
    Views
    36,321

    Re: FTP in Mac OSX 10.13 High Sierra

    Thanx for the info, did you set it up like a Microsoft windows setup. Scans folder in the home folder with all read and right permissions? ?
  25. Replies
    41
    Views
    36,321

    Re: FTP in Mac OSX 10.13 High Sierra

    Unfortunately SMB scanning does not work with high sierra. Will need to get the ftp app and set it up that way.
Results 1 to 25 of 35
Page 1 of 2 1 2