Search:

Along the same lines: On the older Kyoceras, boot to "Door Open" indication > 10871087> close door
Sometimes works. =^..^=

I see. Thanks. =^..^=

The cigar cost me $2, and I enjoyed it for 60 minutes. =^..^=

I was thinking about this as well. I had gone back to a T2530, maybe the third time. I had misunderstood the calibration procedure and called a colleague at another branch of the company. I've used...

I also have a cheap code reader. For the most part, the data was not terribly useful to me. Like the error codes on the Canon iPF's, the errors often has absolutely nothing to do with the specific...

It's definitely a focus issue. Sadly you won't get much detail from the service manual on how to adjust focus. Focus issues are accentuated the further that you get from the slit glass ... the...

I can confirm that the HP Pagewide XL will do the job. I've been incredibly impressed with these plotters. The heavier you run them the better they run. I have some experience with Kip, and there is...

I would not have predicted that. Thanks for posting back, and congratulations on your success. =^..^=

Yes, I've come across it. Every once in a while in a title package a mis-scanned page is detected as C5 Envelope. The customer was kind enough to hold the document, and show me the specific page...

Two machines with this same issue? Is there any chance you've got a pinched wire in the DP somewhere? I've had these DP's torn down to the frame, and there's not much to them. I'd start by re-seating...

The way I understand it, when the spacers wear, the distance between the developing roller and the drum diminishes, and starts arcing. =^..^=

I'm not sure how Kyocera calculates their consumable yields, but they are optimistic at best.

Here's another little thing to watch for on this series: If you reach for the primary charge unit, and...

It sure looks like bad developer spacers to me.

Was it a new unused developing unit? Or a unit of unknown provenance? It sure does not look like a new magenta developing unit to me. =^..^=

I thought that might be the case.

Pad separation works opposite of roller separation.
With pad separation more spring pressure means more page separation.

With roller separation less spring...

This media is way too heavy for the tray pickup mechanism, but telling the customer that they have to use the bypass tray does not mean that they will use the bypass tray.

You'll get used to...

True. I try to make small changes, then if I'm getting a small improvement, maybe go further. On the KM-XXX2 series there are only five increments, default at center. There is always the option of...

Welcome! =^..^=

I've had to adjust separation on the KM-xxx2 series, usually increase page separation, by decreasing spring pressure. Is that what you did?

Possibly related, I have a Toshiba customer that I have...

Nice find! =^..^=

If you've ever had to change that DP frame, you'll know that the feed unit hooks into the base frame, and if not inserted quite correctly will jam on duplex. These are one of my least favorite...

Welcome! =^..^=

I'd start with a new cyan developing unit/toner cartridge.

The cyan parts of the image look composite black, like somebody dumped the waste toner bottle into the cyan toner cartridge.
=^..^=

+1 =^..^=

We've be removing Marketplace on setup. Don't forget DIPSW 172, or it will immediately reload the first time the machine gets an internet connection. =^..^=

Jam code?