Search:

Type: Posts; User: 173545

Search: Search took 0.02 seconds.

  1. Thread: C280 Firmware

    by 173545
    Replies
    2
    Views
    702

    C280 Firmware

    In need of the latest firmware for the C280. Any help would be appreciated. My email is zachr3580@outlook.com

    Thanks.
  2. Re: Bizhub B&W 350, scan to e-mail, subject line...

    Have you tried this method, leaving the entry blank?

    Subject Registration
    1 In the Network Setting screen, touch [Scanner Settings].
    2 Touch [Subject Registration].
    3 Touch the number of the...
  3. Replies
    10
    Views
    7,735

    Re: Konica Bizhub C 253 C2152 Error Code

    I found this helpful.
  4. Replies
    1
    Views
    890

    Re: Konica 7222 Error code N-15

    Solution ID TAUS0638997EN00 Solution Usage 0
    Description
    N-15 code and various other N codes when scanning to E-mail, using PDF* format, after five (5) pages or more. E-mail is received as a data...
  5. Replies
    8
    Views
    2,182

    Looks like the drum and/or cleaning blade needs...

    Looks like the drum and/or cleaning blade needs replacing.
  6. Thread: Konica4345

    by 173545
    Replies
    3
    Views
    564

    Toner supply motor abnormality.

    Toner supply motor abnormality.
  7. Replies
    2
    Views
    662

    Description How to set the ScanAutoDelete time...

    Description
    How to set the ScanAutoDelete time of document stored to a box.
    Solution
    To set the ScanAutoDelete time, perform the following:
    1. Press the Help Key and then select KEYOPE mode.
    2....
  8. Replies
    3
    Views
    1,775

    [Jamming] Replace PWB-A

    Replace PWB-A
  9. Thread: Disappointed

    by 173545
    Replies
    4
    Views
    1,019

    Apparently the only way to fix this is to turn...

    Apparently the only way to fix this is to turn off sorting as the default setting:

    Subject:
    When an original is scanned from the original glass, the machine prompts the user to...
  10. Replies
    3
    Views
    6,499

    Scanner device control system failure ...

    Scanner device control system failure

    0x00dc0000to 0x00dfffff

    MFB3 Board, Scanner Home Position Sensor. BCR board
  11. Replies
    9
    Views
    1,533

    PN for switch is 40AA85010. Number given earlier...

    PN for switch is 40AA85010. Number given earlier is the actuator.
  12. Replies
    23
    Views
    63,201

    I agree with redhotrob. Level 70 firmware solved...

    I agree with redhotrob. Level 70 firmware solved this several times for me.
  13. Replies
    2
    Views
    784

    The duplexer is an optional item. Does it have a...

    The duplexer is an optional item. Does it have a drawer labeled ADU? If so, it may be disconnected. Remove lower rear cover to check wiring.
  14. Replies
    5
    Views
    5,330

    Possibly a clogged toner supply unit.

    Possibly a clogged toner supply unit.
  15. Replies
    20
    Views
    3,429

    Door switch

    MS1 (front door interlock) relays 24v to HV1(charge), HV2(T&S) M10 (toner motor), PRDB, M4 (drum motor), M1, and M3 (developer drive motor).

    I've replaced or cleaned dozens for copy quality issues...
  16. Replies
    20
    Views
    3,429

    I have seen a bad front door switch cause this....

    I have seen a bad front door switch cause this. It's a weak spot on this model.
Results 1 to 16 of 16