Search:

Type: Posts; User: COPIERMAN

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    101

    Re: Finding the location of "Flash Memory"

    there is flash memory on controller board and java software is stored on it.
  2. Thread: MP C3002 jam

    by COPIERMAN
    Replies
    8
    Views
    164

    Re: MP C3002 jam

    If you were doing multiple copies start in bridge unit open both covers and work your way toward right side. possible one cover wasn't open
  3. Re: IM550f is turning itself off when booting up

    thanks for the information. i will try suggestions.
  4. Replies
    15
    Views
    575

    Re: MP C3002 No Toner(Bk) message

    try cleaning Black toner hose might be a clog. When you pull hose from black toner put paper below it and see if toner pour out of hose. If not then change toner pump . Number one cause is black...
  5. Replies
    3
    Views
    153

    Re: MPC307 skewing with ADF

    take the adf apart and clean all the tires you might find a piece of paper or staple down in side. I see that all the time. If don't know how buy service manual. Pettery simple to take a part.
  6. Replies
    2
    Views
    161

    Re: Ricoh MP4054 SC866-00

    look on the web looks like i need to get a sd card with java for copier. Is there a way to turn java off so it wont look for it.
  7. Replies
    2
    Views
    161

    Ricoh MP4054 SC866-00

    We were refurbishing copier and the third party java software didn't get uninstall properly. It came up with a fault code for java. We use user tools in admin tools erase memory and it wipe out...
  8. Replies
    4
    Views
    263

    Re: Ricoh MP C6003 - SC240-04 error

    Check the harness between LDB and IPU. 3. Replace the LD unit. 4. Replace the harness between LDB and BiCU. Buy a service manual for copier will help in repair of copier
  9. Replies
    4
    Views
    263

    Re: Ricoh MP C6003 - SC240-04 error

    Check the harness between LDB and IPU. 3. Replace the LD unit. 4. Replace the harness between LDB and BiCU.
  10. Replies
    13
    Views
    528

    Re: MP C4504 double imaging

    even regular envelope have this issue it matter of finding the right temp setting to fix problem. They have special envelopes and customer just think they can click and print and copier will do the...
  11. IM550f is turning itself off when booting up

    when you turn on copier it starts to power up you can see user tools icon on display then after a minute screen will say powering down and then shuts off.
  12. Replies
    9
    Views
    643

    Re: scan to folder to macbook using SMB

    try a different mpc3003 will not scan to folder Macbook. MY firmware was updated to latest but what i find was java firmware needs to be 11.31 or higher. Also need to set smb client auth to 1. Not...
  13. Replies
    9
    Views
    643

    Re: scan to folder to macbook using SMB

    Slimbob was right i research and thought i had latest but was wrong got the latest firmware for the mpc3003 and was able to scan to it.

    thanks again for the help.
  14. [Misc] Re: macOS scanning problems with RICOH C4503

    does anyone have list of the latest firmware . i want to check and make sure what i have is current. scan to folder works on my MPC3003 but not MPC4503. I have gotten firmware on 4/21 but wanted to...
  15. Replies
    4
    Views
    228

    Re: Bizhub C3851 staple icon missing

    Ok will try that tomorrow
  16. Replies
    4
    Views
    228

    Bizhub C3851 staple icon missing

    i am new to Konica Minolta just got in 2 of this copiers and saw that one in finisher arm were up so i was able to put back in place. turn on back on finisher now paper comes all the way out. i went...
  17. Replies
    8
    Views
    386

    [Error Code] Re: ERROR SC-681-06 on RICOH MPC401

    have you vacuum inside black toner hopper area /check contacts up inside hopper could be one contact is stuck back not spring outward
  18. [Misc] Re: macOS scanning problems with RICOH C4503

    in system preference you have turn on file sharing /set up share folder /user has read write and under options have selected share files smb and account have select user. telnet not working have to...
  19. Re: MPC3503 Can't change Paper size for Tray 1

    envelope need to set paper size in user tools for tray you are using make sure you select 4 1/8 by 9 1/2 and image going left to right or landscape. there is another one show same size but image is...
  20. Replies
    9
    Views
    643

    Re: scan to folder to macbook using SMB

    my firmware is update and scanning to windows 10 works fine. it is the mac side that i am having a problem with. when i try to do telnet and do the smb client auth 2 says invalid parameter but if i...
  21. Replies
    9
    Views
    643

    Re: scan to folder to macbook using SMB

    try last suggestion mpc 3003 will not do "smb client auth 2" only "1" and i change port to 445 no luck scan to Mac Book using Mojave . looks like only the mpc 04 series and up will work.
  22. Replies
    9
    Views
    643

    Re: scan to folder to macbook using SMB

    Will try this suggestion on Monday
  23. Replies
    9
    Views
    643

    scan to folder to macbook using SMB

    Hi everyone,

    ON Youtube saw where they were able to scan to MacBook using OS Mojave. So i bought a Mac book with Mojave and it work

    I can scan to the Ricoh Black and white copiers MP 2554/MP...
  24. Replies
    7
    Views
    487

    Re: Smart panel some apps missing

    try no luck will have to do factory reset thanks for help
  25. Replies
    7
    Views
    487

    Smart panel some apps missing

    Had a technician do service mode 5-761-1 now display really miss up. i try looking in service manual and it is not listed and look in smart panel service manual nothing there either. does some one...
Results 1 to 25 of 480
Page 1 of 20 1 2 3 4