Search:

4736047360

I will try to find it tomorrow and send to you.

I also think it's too much toner, and fuser can't melt it. There were NVM settings for fuser ghosting, you should try it. I believe that is where you adjust 1st Btr's, so they transfer less toner and...

Then, your option is to import 5-10 sets.

I have switched all my clients from Xerox to Ricoh Pro C 751 series. We have cca 15 units on the field, and using only OEM toner and other parts. Have clients that make 2 milions prints per year. I...

This setting is only for thick papers. We are having problems with 60gsm paper.

Yes, NCR just eating reg roller. But, it's too fast to run this low quality NCR on 135.i have another unit mp 9000 and it works just fine.

Hi,

I have this MP 1350 at place where customer prints mostly NCR, carbonless paper. Also That paper is low quality. Wish If I could reduce the speed of the machine to 90 cpm. Does anyone knows if...

As far as I know there is only Network controller for wc 7665, no Fiery.
If you could find xerox tech, it would be the best solution for you.

Hi,

I had same problem last days. After changing separation rollers, no more problems.
RICOH MP 7503 J003

Separation rollers was causing problems. After installing new one all feeds are working.
I still don't understand why it wasn't working with rollers from working MP6502 ???
also, bypass rollers not...

Waiting for new rollers. Thanks for all help.

It makes couple copies sometimes. Tray 2 has made 3K first day we run it. Now non of the cassettes not feeding. It also tears paper, I suspected to Sep pad and tried to adjust tension. I

I know all that problems, but there is no leaking of developer. All the gears in great condition.

Did that, too.

J004
J005

Yes, I did.
Tried with working one from previous model.

Hi,

I got this unit with 1M on counter.

It jams on every cassette on the feed.
I dont have other working unit to change paper feed, have to wait long time to new one to arrive.

regards

As far as I know, this machine can only print with Fiery attached. There is no option to print without Fiery.

Hello,

I get error 16-372 on C570 and cant find code in manual! Machine stucks at boot 2/6.Also swapped ESS from C550 and then can't even get code,machine doesn't power at all. Are these boards...

Thank you.

Its short already.

Hello,
I have this squarefold trimmer for a long time and was never used. It was working before, but now it throws 13-918 jam in E3.

I have connected two jacks from finisher but not sure if i...

It's a fuser error.
And you should reset 744 350 location.
If you google it, you'll find so many pages describing error and reset.

Maybe it could be a bad toner?

I can guarantee that you can trust XeroxTechBrasil and it works.