Search:

Type: Posts; User: byronf

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. [Misc] Re: Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

    I be going through Monday, will export the list.
  2. [Misc] Re: Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

    This is very helpful for the C558, now I need a resolution for the C554e.
    1 down 1 more to go.
  3. [Misc] Re: Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

    Hi,
    Yes I know it make no sense, however this requested by the client.

    Client has a C554e they recently up graded to C558 and back up C554e. The old C554e has the Thick 4 setting for tray 1 &...
  4. [Misc] Re: Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

    Hi All,

    Last attempt for the request below.
  5. [Misc] Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

    Hi All,

    I am looking for the dipsw that enables the Thick.4 tab for tray 1 & 2 paper settings on E-range or 8 series.

    I recently came cross this info on the forum but for the life of it I am...
  6. Re: Bizhub C258 artefacts, strange lines on printouts

    Hi,
    This seems to be your drum unit, 80k these charge rollers start failing. Change your drum K.
  7. Thread: Bizhub 558 help

    by byronf
    Replies
    1
    Views
    203

    Re: Bizhub 558 help

    Hi,
    Change admin password in service mode - service mode -stop - 0 - C - administrator password - enter new password -END - re-enter new password END & EXIT.

    Then after you have changed your...
  8. Replies
    3
    Views
    266

    [Misc] Re: Bizhub C35 wont print landscape

    Hi,

    I seen this often where the incorrect operating system on the driver is used.

    Please advised if your print driver displays the tabs in the image below, if not then your operating system is...
  9. Replies
    7
    Views
    401

    Re: C258 error code C-C164

    Hi,

    MFP board procedure gone wrong you need to enter the machine type info before at the beginning of FW also ensure that the original EMMC of the machine is mounted on the board.

    Your best bet...
  10. Replies
    3
    Views
    539

    Re: B3622 printing TX reports

    Hi,
    Yes this is 100% correct. You will have to delete and recreate all users.
  11. Replies
    16
    Views
    1,099

    Re: Biz C3350, C3351 creasing paper

    Hi,
    Worn rollers are not the cause of this, the issue comes from the holder you will notice the rollers assy wears that bushing down leaving a play. Yes If it's your fist time it could take 2 hours...
  12. Replies
    16
    Views
    1,099

    Re: Biz C3350, C3351 creasing paper

    Hi,
    It's the Holder and rollers ASSY.
  13. Replies
    16
    Views
    1,099

    Re: Biz C3350, C3351 creasing paper

    Hi All,

    This issue is common from C25, C35, C3110, C3350 & C3351.

    Issue is the two parts attached.
  14. Replies
    3
    Views
    312

    [Dead] Re: No boot device found b1100

    Hi,

    I am unable to access service mode to do Firmware. Reseated all connectors and boards still no luck.

    I am now suspecting the SSD, has anybody had an SSD fail on this model?
  15. [Misc] Re: Bizhub C224 / C364 scan to email with authentication on

    Hi,

    During configuration of user authentication registration make sure that the email field is left blank.
  16. Replies
    3
    Views
    312

    [Dead] No boot device found b1100

    Hi,

    We have been having lots of unexpected power outages and loadshedding. As a result when the power returned my B1100 displays a black screen " BOOT NOT DEVICE FOUND".

    I am unable to enter...
  17. Replies
    1
    Views
    309

    [Misc] M4580fx initialize or reset main board

    Hi All,

    I have a few Samsung devices where the client is using equitrac (print management solution). The devices where working perfectly until the software was embedded.

    We are now trying to...
  18. Replies
    27
    Views
    1,980

    Re: konica minolta 658e bad copy

    Change the Entire scanner unit 4 /4E series works on the 8 series
  19. Re: konica minolta 558e doc feeder intermittent jams

    Jam Code?
  20. Replies
    18
    Views
    2,294

    Re: 4 Series K Toner Shortage info?? (TN321)

    Use TN512,TN-513,TN-516, TN322K or TN324K swop the caps over.
  21. Replies
    27
    Views
    1,980

    Re: konica minolta 658e bad copy

    Hi,
    This is caused by the 3rd mirror misaligned.

    It's a time consuming task to adjust and waste of paper while testing as this distorted image moves towards the ADF and back to platern glass...
  22. Replies
    27
    Views
    1,980

    Re: konica minolta 658e bad copy

    Hi,
    This is caused by the 3rd mirror misalign.

    It's a time consuming task to adjust and waste of paper while testing as this distorted image moves towards the ADF and back to platern glass while...
  23. Replies
    18
    Views
    1,471

    [Misc] Re: Bizhub C3110 shows replace k toner

    Hi,
    This is a region issue, what are he first four digits of the serial number of your machine?
  24. [Error Code] Re: Konica Minolta B4052, toner detection error

    Hi Albonlibe,

    I swopped the chips of the depleted toner and the first replacement toner. The errors are swopped it seems like we have the incorrect region toner.

    I was hoping to get a work...
  25. [Error Code] Konica Minolta B4052, toner detection error

    Konica Minolta B4052, set up toner has been depleted after installing new toner a toner detection error is displayed.

    The machine was running well before toner ran out. I put in new 2 other oem...
Results 1 to 25 of 104
Page 1 of 5 1 2 3 4