Search:

Type: Posts; User: Quatro

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    1,537

    Re: Senior Tech KM or NRG in Dubai

    hi,

    Interested on the position.

    Regards,
  2. Replies
    10
    Views
    497

    Re: Residue right side of prints

    do you mind to share the model of the machine
  3. Replies
    10
    Views
    497

    Re: Residue right side of prints

    Hi,

    I think you have some issue on main charge unit arcing.
  4. Replies
    1
    Views
    445

    Re: OKI ES7470 / MC770

    Hi

    - Turn the power button off from the control panel
    - Press 9 and Start (9S) and turn on
    - Wait until it goes to service mode
    - Press OK
    - Press 106 and start
    - It will print the report ...
  5. Replies
    7
    Views
    877

    Re: Oki C531 printer

    Hi,

    You have busted fuse on maintenance board.
  6. Replies
    1
    Views
    368

    [Jamming] Re: Oce Colorwave 3500 printheads catching

    Hi,

    Is there any error occurred after it crashes in the media?
  7. Re: Oki MPS3537mc skewed copies/prints from 1st drawer

    Hi.

    Checked the paper feed (front ass'y) or try to print on MPTray if it gives you same result.
    if yes then there is some issue on the paper feed unit
    If No then you have issue on the tray one...
  8. Replies
    6
    Views
    875

    [Error Code] Re: Oce PlotWave 340 error code 6501

    i reply on your message
    issue is in exhaust fan
  9. Replies
    6
    Views
    793

    [Misc] Re: Oce colorWave 650 problem

    is this working?
  10. Replies
    8
    Views
    1,362

    Re: Oce plotwave 360 dead machine

    [QUOTE=Riviera;1648178]

    sorry for disturbing you
    is this now working ?
    I just recovered my porthos and have now the TSM for PW360 what exactly you need a wiring diagram?
  11. Replies
    5
    Views
    772

    Re: OKI C831 Cyan and Magenta not printing

    hi,

    there is a lot of fuse in maintenance board check the fuse 15 (f15) near f12 and PH connector 3 at maintenance board it is open causing the cyan and magenta blank image.
  12. Replies
    5
    Views
    772

    Re: OKI C831 Cyan and Magenta not printing

    Is this working now ?

    Try to check the fuse at the maintenance board near the Print head cable
  13. Replies
    8
    Views
    1,362

    Re: Oce plotwave 360 dead machine

    it was working before?
  14. Replies
    6
    Views
    793

    [Misc] Re: Oce colorWave 650 problem

    Try to disable the scanner first by removing the cables both power and usb and power on
    16716 error I'm afraid it is permanent error that can be reset thru SDS .
  15. Replies
    8
    Views
    1,362

    Re: Oce plotwave 360 dead machine

    I think there is no issues on the power supply besides you mentioned that except the power button is blinking.
    In OCE PW and CW series the controllers boots up or initialize properly first before...
  16. Replies
    8
    Views
    1,362

    Re: Oce plotwave 360 dead machine

    Hi.

    I think you have software issue the windows embedded in the controller is crashed or the HDD
    To make it sure put the monitor in controller, you will see if the controller boots or no

    in...
  17. Thread: OCE

    by Quatro
    Replies
    0
    Views
    2,053

    [Wanted] OCE

    Hi

    I am looking for OCE TDS600 printhead board.
    Please pm me

    thanx
  18. Replies
    1
    Views
    2,507

    Re: Oce 300 Plotwave

    Hi,

    What part you need?
  19. Replies
    1
    Views
    2,852

    Re: Washington DC Metro Area

    hi,

    Are you providing work visa
  20. Thread: Job Seeker

    by Quatro
    Replies
    5
    Views
    5,118

    Re: Job Seeker

    I have sent my CV.
    thanks
  21. Thread: Job Seeker

    by Quatro
    Replies
    5
    Views
    5,118

    Re: Job Seeker

    Thanks,

    Can I have your email and will send you the cv
  22. Replies
    23
    Views
    5,414

    [CQ] Re: Bizhub C454, Cyan background/ghosting

    Better test the HV and as much as possible if you cab change the DV unit of cyan,
    As per your sample Cyan is some what like over toner,
  23. Thread: Job Seeker

    by Quatro
    Replies
    5
    Views
    5,118

    Job Seeker

    Hi to all,

    I am looking for a job as photocopier technician, I have keen knowledge on KM products both MFP and PP, other than that I have experience also on OCE WFP
    from TDS series to PlotWave...
  24. Replies
    23
    Views
    5,414

    [CQ] Re: Bizhub C454, Cyan background/ghosting

    Hi,

    I think you have problem on HV.
    When you stabilize it shows NG or no?
  25. [Misc] Re: why does my color look like this? how can i correct this please?

    Have you solved this issue?
    Why you don't try to adjust also the fusing temp int to negative, not only the 2nd transfer output just give a shot............
Results 1 to 25 of 30
Page 1 of 2 1 2