Search:

Type: Posts; User: copytechman

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    20
    Views
    1,488

    Re: eBN Fax Receive Forward

    Thanks! I'll have to try that out, appreciate the info!

    A.
  2. Replies
    20
    Views
    1,488

    Re: eBN Fax Receive Forward

    Way back when Toshibas had settings in service mode for fax attenuation and equalizer which at the time sometimes had to be adjust to deal with long dist or overseas fax, in Canada you used to be...
  3. Re: Xerox C9065 and 12-299 code , not listed in edoc for that device

    Found it thanks! Turns out I was given the incorrect info regarding which finisher was on the device. Appreciate the help thank you!
    A.
  4. Xerox C9065 and 12-299 code , not listed in edoc for that device

    I know its finisher problem and its a pr finisher, but that code isnt listed in the pr finisher status raps. Does anyone have any insight on what exactly this code relates to?

    Regards.
    A.
  5. Replies
    3
    Views
    343

    Re: C8055 and ITB belt moaning noise.

    Thanks , it does sound like a rubbing rubber sound and I have acquired a belt to replace to try next.

    Regards.
    A.
  6. Replies
    20
    Views
    1,488

    Re: eBN Fax Receive Forward

    How does that HP text fax thingy work? I just for giggles called the # from desk and get fax tones, but how do you get it to call you? Or do you do a manual RX when you hear the tones?

    Kind...
  7. Replies
    3
    Views
    343

    C8055 and ITB belt moaning noise.

    I Just thought I'd query here because why not. I have a Altalink C8055 in the field that kind of makes a groaning or moaning noise when the ITB belt unit drives. I have isolated as far as I can by...
  8. Replies
    18
    Views
    1,341

    Re: e-studio 281c

    Thats it! The FC15/22/31/310/311 etc and so on.. You know it! I was in from the es16 till the es450 I believe (basically 2000-2007) then from a few years back till now again.

    Regards!
    A.
  9. Replies
    18
    Views
    1,341

    Re: e-studio 281c

    Indeed! I work on the latest models now (after being away from Toshiba since 2007), now have toshibas again (oldest are like the 2555c era devices basically, which are still way different than a...
  10. Re: E-Studio 281c transfer belt compatability

    Its a relic! Let it move on to the next realm!

    A!
  11. Replies
    18
    Views
    1,341

    Re: e-studio 281c

    OMG memories of Toshiba training! I remember going to Toshiba Canada and being trained on the 3511 series and the 281c series.. Amongst others. What a huge POS the 3511 was and god replacing the...
  12. Replies
    73
    Views
    5,149

    Re: C452 Dumpster to the Rescu(r)e!?!

    Regards!

    A.
  13. Re: C458 w/ Fiery "Turn on controller" message

    Tyan computer corp? Interesting, I'll have to keep that in mind next time I need to scan for a fiery.

    Regards.
    A.
  14. Replies
    73
    Views
    5,149

    Re: C452 Dumpster to the Rescu(r)e!?!

    Regards.
    A.
  15. Replies
    73
    Views
    5,149

    Re: C452 Dumpster to the Rescu(r)e!?!

    Looks like night and day and yeah synth is correct, the fiery is not implicitly needed to print with model if you don't want to or run into complications with the fiery! If you're lucky it's default...
  16. Replies
    73
    Views
    5,149

    Re: C452 Dumpster to the Rescu(r)e!?!

    Not really , looks like u have the internal card and the funky cable that goes from that card to fiery , sounds like you have the correct setup guide as long as it mentions how to install said card...
  17. Replies
    11
    Views
    913

    Re: TCR manual adjustment in Bizhub 501

    Have also seen the coupling break at the dev and it wasn't actually agitating the dev augers. Check for rotation of dev, make a blank spot at end of mag roller, run adj and see if the spot fills in,...
  18. Re: C458 w/ Fiery "Turn on controller" message

    Doesn't show at all on the ip scan at all then? I don't recall what it would identify as but you can try this if there's a known quantity of devices on network:

    run a scan multiple times to see...
  19. Re: C458 w/ Fiery "Turn on controller" message

    Also if the the fiery is "live" with dhcp you can locate it likely with a local network scanner (a good free one I use is called advanced IP scanner). Should resolve hostname and IP with enough...
  20. Replies
    73
    Views
    5,149

    Re: C452 Dumpster to the Rescu(r)e!?!

    If you're swapping the fiery onto the other device you will need stuff from inside the donor machine (video interface card, cables/brackets etc) and settings in service mode etc. Best to acquire the...
  21. Re: M5370 HDD replacement, firmware restore and admin auto logout.

    Sounds exciting , even tho I never had a problem with the UI itself , I recall that being something of a task with the Android based ius on those models .

    Appreciate the input, ty!

    A.
  22. M5370 HDD replacement, firmware restore and admin auto logout.

    After replacement of the hdd and restore using the ehd file, and initial setup the device won't stay logged in as admin long enough to update firmware further from restore firmware in admin mode. I...
  23. Replies
    7
    Views
    531

    Re: New Office365 Scan to email issue?

    Thanks for that! But why now all of a sudden I thought that change occurred last year, has Microsoft finally switched to TLS 1.2 for smtp?

    regards!
    a.
  24. Replies
    7
    Views
    531

    New Office365 Scan to email issue?

    Is anyone having new issues with scan to email with office 365? I have multiple machines presenting on and off again authenication / server connection errors that have been setup the same way...
  25. Replies
    2
    Views
    234

    Re: C368 , Admin user box setting.

    And as a last update I'm apparently blind I would swear it wasn't there before but it is now on the op panel.

    Please disregard or delete this post.

    Apologies.
    A.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4