Search:

Type: Posts; User: vickash

Search: Search took 0.01 seconds.

  1. Re: C6500 Gamma Sensor & Max Density Sensor Readings

    Thanks for the tips. Got a chance to swap the sensor plate out with the newer model one this morning. The first test print after initial startup adjustment was still orange. Then I did the "Automatic...
  2. C6500 Gamma Sensor & Max Density Sensor Readings

    Hi,

    I'm working on a C6500 that hasn't been run in a few years. I suspect the gamma sensor is bad. It has the old registration assembly in it (pink dot), and when I run the maximum density sensor...
  3. Replies
    6
    Views
    369

    Re: C6500 Relay Unit & RIP Software

    Thanks! PM sent.
  4. Replies
    6
    Views
    369

    Re: C6500 Relay Unit & RIP Software

    Thanks! Got the relay unit and stitcher up and running. Turns out I was missing part of the bracket on the stitcher side. It got packed into a separate box.

    Still looking out for the version 2.1...
  5. Replies
    6
    Views
    369

    C6500 Relay Unit & RIP Software

    Hi all,

    I'm reassembling a C6500 with a SD-501 saddle stitcher and RU-503 relay unit, but I'm having trouble reconnecting them to the engine. I found an installation manual for the FS-503 + RU-504...
  6. Replies
    0
    Views
    514

    C6500 Disassembly

    Hi all,

    This is my first post here, so not sure if this is the right place to ask, but I need a tech for a one-off job in Fort Worth Texas. You'll need to separate a Konica Minolta C6500 from its...
Results 1 to 6 of 6