Search:

Just replace magenta pcu cleaning will not work when the dcb has gone it's gone good luck

Come on slimslob it comes out the top of the exit assy ie inverter then going back into duplex to do second side then comes out to the exit tray.

Sometimes the top tray for the inverter come out...

Hello

Hello

Hello

Always like to help a contribution user I pm you

+1

Stay safe and well my friend sandy

It would be reset {yellow key} for the 1st key not C

Could be paper transfer note wax bars must be replaced in all areas when due what are the pm lifes

Really silly question it's not the tray above the output tray in the wrong place blocking the top output area

No problem I will send you pm

Hello

+1 two machines out of the box they haven't been setup correctly reference look at the service manual

+1

Great machine one of the best or the best machine made by ricoh speed doesn't made a difference about jamming if the machine jams there a problem get the 75 ppm

Hello

You don't need to enter service mode to update firmware I think you should get a credited ricoh service engineer.

Hope this helps
Dropbox - Epson-WF-C8690-869R SM-PM.pdf - Simplify your life

Recheck the drum unit check mag roller on development assy if compatible toner you may need to vac out dev assy and re setup also can fuser film assembly

Mpc6004 is a good machine 52gsm to 300 GSM should be ok

Samples would be good

Most probably just a polygon motor

Here you go RTB

Did you replace with NEW oem or used

If machine been moved could of pushed down on scanner assy try pulling up front left corner of scanner assy also try clearing copier application in nvram