Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    11
    Views
    439

    Re: Print quality problem C284

    This was kinda of my fault as well because I usually ask all the important questions. We had a few conversations about needing 220v outlet, etc. But they already have the same machine at home office...
  2. Replies
    11
    Views
    439

    Re: Print quality problem C284

    Here is one to add to our "smart" customers list. One of my customers calls about a week ago and buys a Kip Color Wide format (1,025 lbs) for a new building. I go there today to scope out the best...
  3. Replies
    11
    Views
    439

    Re: Print quality problem C284

    Rule # 1 don't trust what customer says about the recycled paper. You have to go there and see for yourself! Don't make sense only happens with recycled paper!

    Was drum a rebuilt or aftermarket?...
  4. Replies
    9
    Views
    1,385

    Re: Firmware for c454e and bizhub 363

    I sent it with Dropsend file service. Hope it helps. No need to contribute to this forum since there is no moderation. The admin (if there is one) let this place go to hell mainly with letting...
  5. Replies
    9
    Views
    1,385

    Re: Firmware for c454e and bizhub 363

    PM me your email
  6. Replies
    16
    Views
    815

    Re: Biz C3350, C3351 creasing paper

    Ok that's good info. The rollers definitely the issue on machine in shop creasing the paper. Not sure how machines with 10 or 20K page counts can wear anything down but a new holder is worth a try.
  7. Replies
    16
    Views
    815

    Re: Biz C3350, C3351 creasing paper

    Good to know. I searched knowledge base and did not see anything about modified parts. Well I know for sure I have bad rollers on machine at shop. Will order a few of those parts for my customers...
  8. Replies
    16
    Views
    815

    Re: Biz C3350, C3351 creasing paper

    Sorry for confusion. I did not take apart the machine at customers office yet. Looking in manual at the steps to remove the exit unit is why I said it look like a big job to get to rollers. Have a...
  9. Replies
    16
    Views
    815

    Re: Biz C3350, C3351 creasing paper

    Update....

    Hi. Thanks to all that posted. Special thanks to the posters who mentioned the "exit rollers" . This pointed me in the right direction and sure enough found the rollers deteriorated. In...
  10. Replies
    16
    Views
    815

    Re: Biz C3350, C3351 creasing paper

    Thanks for reply. Good point. And I cringed when I read the florist story. We all have had the call where a vapor comes off the paper as it exits and the moisture is squeezed off paper! Open...
  11. Replies
    16
    Views
    815

    Biz C3350, C3351 creasing paper

    Has anyone found a solution to the C3350 & C3351 creasing the paper? I know a new fuser takes care of it most of the time but I had a few recently it still did it with new fuser or within a month...
  12. Replies
    0
    Views
    86

    Epson ET-4750 print quality

    Hi,

    A good customer sent me the email below about a printer he uses in home office. Normally would tell a customer to throw out an inkjet printer and buy a laser printer but he has only had this...
  13. Replies
    3
    Views
    361

    Re: Bizhub754e fuser noise

    I've had this many times. You need to replace the cleaning roller bushings, bearings, cleaning & brush rollers. You can get all the parts from Copylite products. Under $100 for everything.
    What...
  14. Replies
    5
    Views
    373

    Re: I need help reset HDD lock password

    Search this forum for procedure.
  15. [Misc] Re: background color problem konica minolta c280

    The print samples are great help but need more information because several things can cause that poor quality.

    What do the consumable life counters look like? If anything at "0"% replace those...
  16. Replies
    1
    Views
    217

    Sharp MX5070 service manual

    Hi,

    Can someone please provide me with the Sharp MX5070 service & parts manuals. I have anything Konica Minolta to trade.

    Thank you
  17. Replies
    0
    Views
    194

    HP LJ M605 printer

    Thought I posted this earlier but didn't see it?

    Anyone know of a good wholesale resource to buy new HP printers or good refurbished? I deal mostly in copiers and don't have many contacts for...
  18. Thread: Bizhub C253

    by copyman
    Replies
    1
    Views
    243

    [Jamming] Re: Bizhub C253

    So you narrowed it down to the paper drawers if manual feed works fine.

    Did you scuff up the shaft and then cleaned or replaced the one way's that paper feed rollers interlock to? Both 1 & 2 paper...
  19. Replies
    4
    Views
    451

    Re: COVID-19 and shortages....

    The word we got was there was a fire at the toner factory in Japan and why the shortage.

    Having to use aftermarket toner for now. Going to try Katun or Copylite. Just hope bad toner doesn't crash...
  20. Re: Any machine with the Internal Finishers...

    Sorry I couldn't be more help but I don't have much experience with them because rather then work on them I removed or swapped them out like you have.

    What's really hard to believe is Kon/Min...
  21. Replies
    25
    Views
    2,241

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    Agree about the newer Kon/Min one ways not needing as much attention like some models in the past. Can't tell you how many times I've cleaned the one ways on the BizHub C203 series, definitely 100's...
  22. Replies
    25
    Views
    2,241

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    This has been discussed several times on this forum and I agree with you 100% and have done the same thing for many years with scuffing the shaft from end to end direction, cleaning one ways with...
  23. Replies
    12
    Views
    960

    Re: C224E white vertical lines

    What are the consumable life counters ?

    Like the other poster said clean the print head windows with wand clipped on inside front door. Also pull white flags in and out.
  24. Thread: C454

    by copyman
    Replies
    11
    Views
    868

    [Misc] Re: C454

    I thought you can manually set the sizes for the drawers and override Auto size? Touch the paper tray then "change settings" tab right next to it. Know I've done that for the Manual feed tray but...
  25. Thread: Bizhub c451

    by copyman
    Replies
    3
    Views
    356

    Re: Bizhub c451

    After looking at your sample again it could also laser unit or HVPS

    Let me know if you need any parts. I have 2 working C451's that are going to be stripped for parts.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4