Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.55 seconds.

  1. Replies
    3
    Views
    120

    Re: IPF770 paper jam issue

    I think I've changed (6) maybe (7) ... two on the same machine within a year.

    I'll be interested in your data output if you can gather it for me. =^..^=
  2. Replies
    8
    Views
    8,475

    Re: Bizhub C360 w/C2152 error

    I just came across this C2152 on a bizhub C220 recently:

    On the machine I was working on the waste bottle had backed up at the primary transfer belt waste. The spout blocked up with toner rocks,...
  3. Replies
    3
    Views
    120

    Re: IPF770 paper jam issue

    Take a look at this post:

    https://www.copytechnet.com/forums/canon/143190-ipf750-says-paper-jam-when-loading.html#post903903
    =^..^=
  4. Replies
    4
    Views
    191

    Re: Toshiba 5055C Hard Disk

    NO. It must be a Wipe Drive. You may not substitute. =^..^=
  5. Re: gear code for cleaning unit transtert belt 2551 ci?????

    I'll take that as a compliment. =^..^=
  6. Replies
    8
    Views
    400

    [CQ] Re: Offset copies

    Do you have the appropriate media type set for the paper you're using? =^..^=
  7. Replies
    5
    Views
    374

    [Misc] Re: m6535cidn Horizontal stripes

    You are learning about "light shock" the hard way.

    Drums are optical devices that are designed for short cycles of less than 1 second exposed to light, and less than 1 second dark. When you leave...
  8. Replies
    7
    Views
    181

    [Misc] Re: eStudio 5540 rainbow

    I'm going to talk all the way around this problem ... hopefully arriving somewhere.

    It probably not a developing issue. The developing units last a minimum 1M prints, and the developer itself is...
  9. Replies
    3
    Views
    281

    Re: Head Management Sensor

    I've had maybe (6) machines that turned into the infinite money pit. And we'd get handy advice from Canon like: " ... yeah, replace all those boards a second time ... "

    Personally I try to advise...
  10. Replies
    3
    Views
    267

    Re: 4052ci Strange inner finisher issue.

    I'll have to look up the details tomorrow. I think it was a 4052ci with a bridge and external finisher, but similar symptoms.

    The precipitating event was their IT wiping all the PCs and letting...
  11. [Error Code] Re: Kyocera FS-2026MFP "Toner Cartridge Improperly Installed"

    If I remember correctly the left side sector gear operates the mechanism that engages the toner cartridges. If any of those gears becomes out of time or loses a tooth, you won't be able to insert the...
  12. Re: gear code for cleaning unit transtert belt 2551 ci?????

    Maybe you'll like it better in Italian:

    Copystar e Kyocera offrono entrambi solo assemblee. Non ci sono parti separate disponibili.
    =^..^=
  13. Re: gear code for cleaning unit transtert belt 2551 ci?????

    Copystar and Kyocera both only offer assemblies. =^..^=
  14. Replies
    20
    Views
    885

    Re: Bizhub C224 waste toner full

    I just want to clarify that you may be seeing the message "Waste Toner Box Installation Error". It's very common for endusers to need to snap off the flag on the waste bottle, so it is not identified...
  15. Replies
    3
    Views
    281

    Re: Head Management Sensor

    I haven't had success with cleaning. You'll have to replace. =^..^=
  16. Thread: MX2700N

    by blackcat4866
    Replies
    4
    Views
    788

    [CQ] Re: MX2700N

    Samples? =^..^=
  17. Replies
    8
    Views
    545

    Re: Kyocera Taskalfa 3051Ci

    It's split developer spacers. When the developing roller gets too close to the drum it arcs, sometimes damaging the drum. The new style units have the spacers from the higher speed units. Replacing...
  18. [Misc] Re: Kyocera Taskalfa 2551 back of the printed sheet is dirty

    Samples? =^..^=
  19. Replies
    9
    Views
    457

    Re: Sharp MX B402 /PRIMARY TRANSFER UNIT

    It's very common for the primary transfer rollers to drop out of the unit during shipping. So the thing to do is loosen up the belt enough to look inside and reposition any/all of the primary...
  20. Replies
    1
    Views
    144

    Re: hp pagewide xl 4000 service manual

    You're not going to be able to reset the PM counter without the manufacturer supplied service dongle. You can only get that dongle by attending a manufacturers 10 day class.

    Were it me I would try...
  21. Replies
    8
    Views
    400

    [CQ] Re: Offset copies

    Samples?

    Residual images of what? previous prints? registration marks? something else? is there an interval?
    =^..^=
  22. Replies
    4
    Views
    232

    [Error Code] Re: Olivetti 3002MF

    Is it a Matsuri? =^..^=
  23. Replies
    13
    Views
    1,138

    Re: Driving in the time of Covid 19

    Most US places, yes, right turn on red (unless marked otherwise). Some cities/states do not allow it. =^..^=
  24. Replies
    4
    Views
    232

    [Error Code] Re: Olivetti 3002MF

    I suspect this cross-references to a Kyocera ... do you know which? =^..^=
  25. Replies
    6
    Views
    410

    Re: HP PageWide Managed Color MFP E77650

    I've never been able to find an eject function. These are some of the most user unfriendly machines I've ever seen. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4