Search:

Type: Posts; User: tcypy1961

Page 1 of 20 1 2 3 4

Search: Search took 0.22 seconds.

  1. Thread: MFC-L6700DW

    by tcypy1961
    Replies
    1
    Views
    213

    [CQ] MFC-L6700DW

    Called out because of lines. Appeared to be drum so ordered and replace(generic) copies came out extremely light in addition on right side (initial problem was on left side of paper) it has moving...
  2. Thread: MX2700N

    by tcypy1961
    Replies
    4
    Views
    894

    [CQ] MX2700N

    I usually handle just mechanical issues with this copier; not sure if this is one. Customer said the copier was leaving streaks then upon arrival called it ghosting which is what I saw(I call...
  3. Thread: Bizhub600

    by tcypy1961
    Replies
    3
    Views
    972

    Bizhub600

    Two weeks ago I replaced the drum and drum blade. Earlier this week I was called due to a misfeed customer could not locate. Upon arrival Copier was working (used mainly as printer). Was just talking...
  4. Replies
    1
    Views
    445

    [Error Code] LSU motor error

    Xerox WC 3550; I posted this a little over a week ago as LSU error. I went out and machine said Error LSU motor.

    This problem only occurs when printing. Customer said until today after me looking...
  5. Thread: WC3550

    by tcypy1961
    Replies
    3
    Views
    239

    [Error Code] Re: WC3550

    Not sure what code other than what customer told me; LSU error. I've only serviced this Copier once when the adf had a piece of paper stuck. I have not been out to copier yet. Looked at a couple of...
  6. Thread: WC3550

    by tcypy1961
    Replies
    3
    Views
    239

    [Error Code] WC3550

    LSU error mainly when printing. Solution??? Clean or replace??? Worth it??? Thanks!!!
  7. Replies
    2
    Views
    304

    [Misc] Re: Color LJ 9500mfp

    Correct fuser don't know; as I stated only second one of these I've serviced and first time seeing the fuser.
    Customer did have a spare fuser he got when purchasing this machine; fuser was still in...
  8. Replies
    2
    Views
    304

    [Misc] Color LJ 9500mfp

    customer could not shut left door after clearing misfeed from fuser.
    Fuser was not locking into place.
    The only way I could resolve was to remove the 2 screws at the female receptacle.
    Is there...
  9. Replies
    3
    Views
    416

    Ricoh Aficio 2018 Toner Motor

    Why does the toner motor only operate while in fixed mode? It will not work when in censor mode, or when I force feed toner via 2207. However, it will run when I activate the 5804 operation to run...
  10. Replies
    2
    Views
    401

    [Misc] Ricoh Aficio MP C2551

    Called for apparent problem with unknown error code that would come up after 8 copies.


    1. error code was a SC362. ran sp to set all TD sensors error code went away. Was told that copier kept...
  11. Replies
    3
    Views
    388

    Ricoh Aficio 2018D

    Is there a way to increase the fax memory to support large fax runs? As of right now, the machine can only do 40 pages at a time due to the limitation. Thank you for any help provided.
  12. Thread: Ranting

    by tcypy1961
    Replies
    9
    Views
    6,399

    Re: Ranting

    [QUOTE=allan;746813]Mixed base or mostly the same brand, amount of machines, OEM dealership? Been working for companies that just float above the water for years.
    Once the morale is gone its...
  13. Thread: Ranting

    by tcypy1961
    Replies
    9
    Views
    6,399

    Ranting

    I've been in this business since 1984. While I don't mind it much, I did make a bad decision in 2006. Instead of leaving the company (that had been going down since 1996) when the owner was ready to...
  14. Thread: Sharp MX501N

    by tcypy1961
    Replies
    8
    Views
    780

    [Misc] Re: Sharp MX501N

    Copier was moved by customer, floor it was rolled on plus parking lot was not smooth. Could the move have damaged hard drive or loosened a connection???
  15. Replies
    1
    Views
    282

    [Misc] Ricoh MPC 2551C

    Will a toner end sensor for a MPC 1100, 1350, 3000 work on a MPC 2551. From picture sensor looks identical other than wires???
    Thanks!!!
  16. Thread: Sharp MX501N

    by tcypy1961
    Replies
    8
    Views
    780

    [Misc] Sharp MX501N

    This Sharp MX 4501N (not MX501N) copier was working at office it came from according to customer. When move to present location I was told copier would not come on. I turned copier on and noticed the...
  17. Replies
    7
    Views
    1,490

    Re: Lexmark XC-2132

    I was told the problem started after the customer initially replaced the drum unit after I had replaced the drum assembly(replaced drum assembly only). I also cleaned the transfer assembly. Is the...
  18. Replies
    7
    Views
    1,490

    Lexmark XC-2132

    What would cause this?

    41512
  19. Replies
    12
    Views
    1,328

    [Jamming] Ricoh MP4001 document feeder DF3010

    would it make any difference that this feeder misfeeds more when scanning to email than when scanning either to document server or scanning for copying??? The most common misfeed in the history log...
  20. Replies
    1
    Views
    556

    Toshiba eStudio2830c

    I purchased this eStudio2830c from one of my customers (a thrift store) for $100 to use at my home for my wife and daughter (school teachers) and myself for business use. It has been a fairly...
  21. Thread: Radf B292

    by tcypy1961
    Replies
    4
    Views
    428

    [Misc] Re: Radf B292

    same customer another MP161 B292 feeder. This feeder will at times grab a stack of paper 10 sheets or more at one time. the ONLY thing that I've found that stops this and I'm not sure why is cleaning...
  22. Replies
    4
    Views
    483

    [Misc] Re: Image Formula DR-G1139

    In the area where I believe the noise is coming from as well as throughout the scanner there are no bushings all bearings. My experience tells me that whether bushings or bearings were the problem...
  23. Replies
    4
    Views
    483

    [Misc] Image Formula DR-G1139

    Was told that the scanner was noisy, had customer run 1/2 ream of blank paper through twice. Each run I heard for maybe a second the noise that apparently is continuous at times. Doesn't seem to...
  24. Thread: RisoR3950UI

    by tcypy1961
    Replies
    2
    Views
    875

    RisoR3950UI

    40229Hopefully this can be seen. I'm curious what would cause the duplicator not to print the whole original. The print is about the 30th. I service copiers mainly, this is only the 2nd Riso I've...
  25. Thread: SR880

    by tcypy1961
    Replies
    1
    Views
    504

    [Misc] SR880

    Punch will punch minimum of 2 times on paper once in middle & once where it's suppose to. This is the first time I experienced it happening. I cleaned & reseated all connections on the finisher PCB....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4