Search:

Type: Posts; User: Bix

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    2
    Views
    99

    Re: Standby noise Bizhub 227

    Yeah, thanks for your guess. It could be!:) Why do you say they get you dirty? I personally when I do maintenance I don't have big problems. The only time I get "dirty" is when I have to replace the...
  2. What is the purpose of this black film on bizhub 227?

    Hi, for years I have been installing bizhub 227 and I have never understood where to put this. And above all, what is it for?

    46072
  3. Replies
    2
    Views
    99

    Standby noise Bizhub 227

    Hi, it's actually not a loud noise but I want to understand what the bizhub 227 does when it is on standby. In a nutshell, every 15-30 minutes it makes a noise of 1 sec, as if it should switch on...
  4. Replies
    2
    Views
    133

    [Misc] Re: 4050 LCD screen freezing

    Check the wiring from the MFPB to the screen. On the bizhub 4050 it is very tight. Once the screen froze and by detaching and reattaching the cable from both directions, the screen started working...
  5. Replies
    11
    Views
    286

    Re: Clean the ph unit without taking it apart

    In general, I speak of models C284e, C258, C250i etc. What I have learned, you need to test for each color. Sometimes he goes crazy for a line that is not actually due by PH Unit but is due by...
  6. Replies
    11
    Views
    286

    Clean the ph unit without taking it apart

    Hi, what are your best skills to clean the PH UNIT without taking it apart?
    In the bizhubs there is a magic wand that allows you to easily clean the window. But sometimes it may not be enough.
    ...
  7. Replies
    9
    Views
    736

    Re: i series and Remote Panel

    I went crazy for a month for this problem. I had even done Clear All Data and wasted a lot of time during the installations.

    I found out after a long investigation on infohub. I'm glad you solved...
  8. Replies
    14
    Views
    418

    Re: C654 network port issue.

    Hi, you could try to connect directly with your PC. Make sure that the network administrator has not turned on the PoE switch power or any problem with the switch that does not allow DHCP.
  9. Replies
    3
    Views
    104

    Re: Konica Minolta C554e- FREEZING CONTROL PANEL.

    Check in service mode if it returns any errors to you. Usually it could be FA14
    What firmware do you currently have installed?
  10. Replies
    9
    Views
    736

    Re: i series and Remote Panel

    Thanks for restarting the thread. I have solved this problem! To solve, go into the printer settings and in the search bar write WebDAV. Three WebDAVs will appear to the left. Now turn off all three...
  11. Replies
    4
    Views
    147

    Re: UPLOAD FILES FAILED

    If you have problems, use any free alternative like google drive, mega etc.
    In the end, share the public link
  12. Thread: Sent items

    by Bix
    Replies
    12
    Views
    195

    Re: Sent items

    I think it's badly configured. In other forums, in addition to showing me the messages sent, it tells me if they have been read by going to another folder.
  13. Replies
    1
    Views
    156

    Re: Konica Minolta C554e Error Code-CF902

    Hi, I found this here: C-F902
  14. Replies
    4
    Views
    171

    Re: Change electronic components & iOptions

    Yes, I read the manual and I must say that theoretically it is difficult for these licenses to be lost.
    Both in the 8 series and in the iSeries, they are saved in two different places. So unless you...
  15. Thread: 360i drum error

    by Bix
    Replies
    5
    Views
    147

    Re: 360i drum error

    Interestingly, I didn't know about the new black and white printers. However I believe that condensate may have arisen. Leave it out for a couple of minutes (remember to protect the surface) and then...
  16. Replies
    4
    Views
    171

    Change electronic components & iOptions

    Hello,
    I've always had this doubt. When I insert an iOption on a bizhub printer, it is registered on the LMS server if the printer is connected to the network.


    When should i pay attention to...
  17. Replies
    11
    Views
    387

    [Misc] Re: C250i Self Diagnostic on start up

    I didn't like this firmware, it did strange things for me. Now I prefer to experiment with GC1-7B
  18. Re: How to print a multiple page sized PDF document

    Hi, in the applications section there is Separate Scans. is that what you mean?
  19. Re: Konica minolta c224e showing OCR dictionary not found

    You need the file OCR Dictionary in Service Mode. Are you technician?
  20. Replies
    4
    Views
    170

    Re: KONICA MINOLTA FIRMWARES

    ?? check private message
  21. Replies
    4
    Views
    170

    Re: KONICA MINOLTA FIRMWARES

    Hi, only authorized dealers have access to the Konica Minolta website to obtain the firmware.
    If you need specific firmware, if you are a donor someone here in the forum could offer you the download...
  22. Thread: Search Error Codes

    by Bix
    Replies
    11
    Views
    324

    Re: Search Error Codes

    Service manual on windows tablet: control + F and look for the code.
  23. Replies
    12
    Views
    206

    Re: Remote panel server settings tab is missing

    I think the G00-X8 will arrive in late June
  24. Replies
    12
    Views
    206

    Re: Remote panel server settings tab is missing

    Unfortunately you cannot activate this option remotely since you do not see the remote panel and server settings
  25. Replies
    12
    Views
    206

    Re: Remote panel server settings tab is missing

    HDD Enabled? Firmware version?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4