Search:

Type: Posts; User: mtcchuck

Page 1 of 2 1 2

Search: Search took 0.06 seconds.

  1. Replies
    11
    Views
    538

    Re: TA 3051ci void through colors

    Hate to jinx it but the cassette heater seamed to do the trick. 2 weeks worth of news letters and bulletins and no call back. thank you all for the help. much appreciated!
    Chuck
  2. Re: Kyocera M2640idw - Failing to detect paper in ADF

    Couple questions, when you open the adf or lift the cover does the feeder go through its reset procedure? i.e. rollers turn and reset? Can you run maintenance mode 203?
    If it doesnt go through...
  3. Thread: c253 1101 jam

    by mtcchuck
    Replies
    15
    Views
    655

    Re: c253 1101 jam

    So far so good! I was in the same building yesterday and they never mentioned the machine! I appreciate all the help!
  4. Replies
    11
    Views
    538

    Re: TA 3051ci void through colors

    I will do that. Obviously you have access to info using serial numbers! I may not be back down there for a few days. Unless she calls with an emergency. You say "always nice" to see typical field...
  5. Replies
    11
    Views
    538

    Re: TA 3051ci void through colors

    Awesome! thanks We will try this today!
  6. Replies
    11
    Views
    538

    Re: TA 3051ci void through colors

    Thanks for the input but actually one day i worked on it the air conditioning was not working. I thought that might be an issue but she said the prints had gone bad the afternoon before. running...
  7. Thread: c253 1101 jam

    by mtcchuck
    Replies
    15
    Views
    655

    Re: c253 1101 jam

    Well...I went back to test machine. As stated before i moved parts from tray 1 to tray 2. With this being said i fully expected tray 2 to jam. I ran 125 from tray 1 and 125 from tray 2 with no...
  8. Replies
    11
    Views
    538

    TA 3051ci void through colors

    Good morning
    Not sure why but every machine i touch right now seems to be a project. Anyway i have a TA3051ci that has voided colors through the images causing a "rainbow" effect on prints. MM089...
  9. Replies
    5
    Views
    437

    Re: 2640dw crooked skewed scans

    Delivered new M3145 yesterday. problem fixed (i hope). Someone less picky will get a nice deal on a M2640. i did get it damn close though. customer was scanning then reprinting and comparing...
  10. Thread: c253 1101 jam

    by mtcchuck
    Replies
    15
    Views
    655

    Re: c253 1101 jam

    No kidding? I was always taught to oil one ways. I was told that by our tech rep when i first started this career. (we are kyocera dealer) Ive been oiling them since 1996! Not saying im right...
  11. Thread: c253 1101 jam

    by mtcchuck
    Replies
    15
    Views
    655

    Re: c253 1101 jam

    Thanks for the advice. i will head back over and try the registration bushings and switch feed clutches. As far as addressing shafts i sanded with emery cloth and checked/oiled one way bearing. ...
  12. Thread: c253 1101 jam

    by mtcchuck
    Replies
    15
    Views
    655

    c253 1101 jam

    Good afternoon
    I have a Bizhub c253 giving me a fit. Jams from tray 1 giving an 1101 code. I have replaced feed tires, addressed the one ways and shafts, cleaned paper feed clutch as well. I have...
  13. Replies
    5
    Views
    437

    Re: 2640dw crooked skewed scans

    Spent a couple hours at this machine yesterday. Customer uses doc feeder mostly so I focused on feeder. Adjusted right hinge as far as possible, did some filing to get a little more adjustment and...
  14. [Misc] Re: Kyocera Taskalfa 2551 back of the printed sheet is dirty

    Any resolution to this problem? We have a 306ci with similar issues. We have done a complete maintenance and problem still occurs. Using OEM toner.
  15. Replies
    5
    Views
    437

    Re: 2640dw crooked skewed scans

    Thanks for the input! I'm headed back to the machine today. Not sure about the machine taking a hit. I doubt it did at the customer office. I don't think they would be able to move it.
  16. Replies
    5
    Views
    437

    2640dw crooked skewed scans

    Good morning all,
    Im working on a 2640dw with skewed/crooked scans. I saw the posts about paper skew and corrected that using the suggested shim the fuser method. Now im working on the scanner. ...
  17. Replies
    7
    Views
    458

    [Error Code] Re: Lanier LD365C / Ricoh MPC6501

    Thank you very much for the info. I will give them the heads up about the headaches associated with this model of machine.
  18. Replies
    7
    Views
    458

    [Error Code] Re: Lanier LD365C / Ricoh MPC6501

    I did try searching but for some reason it wont let me go past the first page of the search.

    Correct, I could not find it for free. We are a Kyocera dealer and the Lanier machine was given...
  19. Replies
    7
    Views
    458

    [Error Code] Lanier LD365C / Ricoh MPC6501

    Good afternoon
    I am looking at a Lanier LD365C with a service code sc534. I believe it crosses to a Ricoh MPC6501. I cannot find a service manual online. Can anyone offer information on this...
  20. Re: CS520i solid black pages after user dropped waste toner and it went everywhere

    Is the main charge wire in one piece within the charger assembly? If so, is the cleaner all the way to the front frame of the housing?
  21. Replies
    2
    Views
    332

    Re: M3540idn Fax Memory Upgrade ?

    The memory upgrade doesn't help fax memory per TB #1
  22. Replies
    7
    Views
    1,306

    Re: Taskalfa 5002i Jam 4211

    We had a taskalfa 3010i doing same thing. Lubricating the registration rollers fixed it! We changed all the same parts you have. Just started trying everything. While cleaning the registration...
  23. Replies
    3
    Views
    979

    Re: kyocera 5050 laser code C4000

    x2 MC Assembly or door switches
  24. Replies
    7
    Views
    897

    Re: M2540DW fuser gear jumping

    we have had to replace fusers for this in the 2540 and P2040 both
  25. Re: Kyocera M2030dn prints normally but doesn't copy

    can you scan ok? usually if the scanner is locked you get a horrible noise and c-code
Results 1 to 25 of 27
Page 1 of 2 1 2