Search:

Type: Posts; User: tonerjockey

Page 1 of 16 1 2 3 4

Search: Search took 0.15 seconds.

  1. Replies
    3
    Views
    120

    [Misc] Re: Need Movie File A5C10Y0-C200-G00-00

    Hello, i like your logo.


    is that the Xerox standard, or the 660?

    the 660 i can still hear the sound it made when it engaged the gripper bars and some other noise, either that or the...
  2. Re: Samsung Xpress C1810W error #A1-4111

    so, the darn thing.
    i got the ITB out. couldn't find any other solenoids anywhere without removing the main drive unit.


    but i did find that the ITB has a shaft that rotates to raise or lower...
  3. Re: Samsung Xpress C1810W error #A1-4111

    Hi Guys,

    i studied the parts book. i only see one solenoid on the main drive unit.
    but there is another shown in the right frame.

    does anyone know if this unit uses a solenoid to cycle/...
  4. Re: Samsung Xpress C1810W error #A1-4111

    ok, i found so far the ITB removal process, darn thing.


    still looking to see what the solenoid does that i repaired since it didn't fix it, and i told customer it had been obviously fixed...
  5. Samsung Xpress C1810W error #A1-4111

    Hi Guys, hope your all doing as good as possible with the Covid-19 fiasco.

    one site said that it was a sticking solenoid in the upper left corner inside the right side cover
    .
    well, i removed...
  6. Re: Toshiba estudio 305 SE main drive unit or parts needed

    Good morning.
    and my limited experience in hardening steel, both with heat, and quench, to case hardening with carbon, i think that what ever steel you quality steel you start with limits the...
  7. Re: Toshiba estudio 305 SE main drive unit or parts needed

    Hey Brother, i got busy today and didn't get a chance to get back to you.


    so, as expected, i took the drive unit back out and looked close and your right.
    that thin roll pin was in 3 pieces,...
  8. Re: Toshiba estudio 305 SE main drive unit or parts needed

    Good morning blackcat4866, yesterday your pictures didnt come up on my phone.

    i am now seeing your amazing pin setting jig you made. very impressive.


    your a true professional technician,...
  9. Re: Toshiba estudio 305 SE main drive unit or parts needed

    Oh man Blackcat4866, thank you so much for that.

    I can't fathom a metal pin shearing of before it breaks the plastic.

    I used to drive the pins out with a? 1/16 or 3/32 round punch and a small...
  10. Toshiba estudio 305 SE main drive unit or parts needed

    Hello everyone, i hope you are all doing good under the situations.


    i have a this call where the drum isnt turning and the paper folds up under the drum. the registration roller is turning.
    ...
  11. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hi Vigour, thank you.

    I saw a main drive assemble next to a Fuser exit motor in the parts book.

    Is the problem resolved by replacing the main drive unit?
    The code came up as a Fuser and Fuser...
  12. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Yes, i was there way back. i really enjoyed it for a long while. but the color copiers in the early to mid 80's, and the low pay burned me out.

    but they could have built there stuff better,...
  13. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    yea, remember back ? i cant remember if it was 20 years ago. but some sammy's were also sold with the Xerox badge on them .

    it was such a terrible quirky design. they all needed to have the under...
  14. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Thanks for the info Phil.

    i do appreciate it. yes, i never liked anything about sammy's. total junk inho...


    Jim
  15. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hi everyone, Happy Friday.
    i hope you are doing good.

    so i wanted to post the outcome on this code.


    its a far call, so i asked them to open the right side door, and look for any jammed...
  16. Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hello guys, i hope you are doing good and things will get back to normal very soon.


    i have this customer with the error code.
    the samsung fault isolation seems inconclusive partially.


    it...
  17. Re: Brother MFC L-3750 CDW new toners wont reset.

    Hello, i dont k now what happened to my follow up right after, but its gone now. maybe on another "reply to sender"??

    anyway, the CRUM chip contact on the machine side, i removed the cover and...
  18. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    and after getting the 7 computers reset up, they asked "how do we get a fax confirmation" and i was flipping thru the user choice, went into admin, and all of a sudden realized i hit the same startup...
  19. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    I was able to reconfigure two computers before the customer had to leave. It's the furthest customer I have so that's not supprising.
    I seem to have an uncanny ability to go into a customer, and...
  20. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Ok, I've reset it and it will copy. Praze the Lord.

    Checking the printer settings now. Thankfully there not on a server.

    I'll post my outcome later.

    You all be safe, Jim
  21. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Oh God.
  22. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Phone didn't spell right and I'm panicked.

    I was just following the service entrance from the manual. I was trying to get into the service mode for the sensor cleaning.
    I didn't see that exact...
  23. Please help Samsung multiXpress x4250lx stock in service mode after hitting isettings

    I read just looking for the one management I'm diagnostics to do the act cleaning.

    I hit initial settings. Wouldn't go back so I hit language.

    I'm so screwed.

    Can anyone please help me asap?...
  24. Re: Brother MFC L-3750 CDW new toners wont reset.

    Hi guys,
    Ok so the machine only had 3220 prints on it. The drums we're at 80%.


    I cleaned the toner sensor contacts. Then took the contact board out, and 2 of the 4 wire connectors were...
  25. Re: Brother MFC L-3750 CDW new toners wont reset.

    oh cool. thanks Phil. i will try that and let you know.


    have a great day, Jim
Results 1 to 25 of 390
Page 1 of 16 1 2 3 4