Search:

Type: Posts; User: Dcopyman

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    263

    [Electrical] Re: Showing N9 on ESP surge protector

    kdr636.... Do you have any first hand experience with either one, and if so which would you say does the job better? I looked up prices quick and found one was around $162 msrp and one was $562 msrp....
  2. Replies
    6
    Views
    263

    [Electrical] Re: Showing N9 on ESP surge protector

    Yes I tested with meter (crappy one) under stress and so did the Electrician.
  3. Replies
    6
    Views
    263

    [Electrical] Showing N9 on ESP surge protector

    I have a MX-5070N that is powering down and restarting frequently. I have replaced Msata, and installed an ESP surge protector. The ESP displays N9 ( >=4vac between neutral and ground) and also...
  4. Replies
    5
    Views
    611

    Re: Sharp MX-6070V with the COVID Curse

    had the same problem and new PCU pwb fixed issue also
  5. Replies
    14
    Views
    846

    Re: Are F2-64 a common problem with Sharp?

    That model is very prone to that error code... Check the lower holder for black toner motor... sometimes plastic clip breaks and motor can seperate from drive not allowing toner to be added... after...
  6. Replies
    3
    Views
    350

    [Dead] Re: MX2630 switching itself off

    Sometimes a corrupt print job can cause machine to keep cycling on and off, try disconnecting network cable and see if that corrects issue
  7. Replies
    8
    Views
    520

    [Error Code] Re: LCC_ERR error on MX1054 with LC13

    we have been using the ESP brand also for 10+ years
  8. Replies
    8
    Views
    746

    [CQ] Re: Color stripes Sharp MX-3060 and MX-3070

    Sounds like high humidity causing arcing inside copier..... Sounds like customers need to control the humidity better at locations
  9. Replies
    8
    Views
    520

    [Error Code] Re: LCC_ERR error on MX1054 with LC13

    JLSam.... no other jam codes or errors have accompanied this error.... i thought power may have been an issue also, but they recently moved to a different location that had a dedicated 208v for...
  10. Replies
    8
    Views
    520

    [Error Code] Re: LCC_ERR error on MX1054 with LC13

    And yes the Firmware is updated to the latest version that was supposed to fix this issue!!!!!!
  11. Replies
    8
    Views
    520

    [Error Code] LCC_ERR error on MX1054 with LC13

    Replaced LC13 main pwb and power supply PWB, Replaced all 4 clutches in lc13 per Sharp support, also replaced sensor that detects lcc and copier connected, and replaced 1054's PCU PWB. Machine will...
  12. Replies
    10
    Views
    1,525

    Re: MXM5071 F2-78 and now dark copies

    I've had same issue and pulling black developer out of dv unit. Replaced black drum frame per Sharp and it seemed to fix issue. Was averaging about 10k copies before pulling developer out. it's been...
  13. Replies
    8
    Views
    2,790

    [Error Code] Re: Sharp 5070 c4-20, f2-49

    Had same problem with MX-4070, ended up being the ptc frame unit... there is an updated frame that allows spring to align better contact with ptc unit
  14. [Misc] Re: Enabling Built in Data security kit on Sharp MX6071

    Thank you Mansart... I really appreciate your quick response. I have 20 machines to activate these on, let the fun begin!
  15. [Misc] Enabling Built in Data security kit on Sharp MX6071

    I have searched everywhere on IDNC site on how to enable built in data overwrite ( data security kit ) and I haven't been able to find it! I remember Instructor at Sharp telling us how, but that was...
  16. Replies
    20
    Views
    1,745

    Re: MX-3610 color and calibration problem.

    Just had a weird issue like yours caused by 2 separate issues. First issue was all the toner transport pipe seals were missing seals so they were all dumping on t/c pwb. Would have washed out...
  17. Replies
    20
    Views
    1,745

    Re: MX-3610 color and calibration problem.

    If I was having that problem, I would try different PCU Pwb, due to unusual issues with reading paper on glass and seems like your having some process control issues!
  18. Replies
    6
    Views
    747

    Re: Sharp mx 3070 /doc feed issue

    Remove back adf cover and make sure there isn't a paper clip on adf pwb. They find their way inside cover and cause " wierd " issues!
  19. Replies
    12
    Views
    913

    Re: Sharp MX-M753n

    Only issue we have had with these are issues with fuser drive gears wearing badly!
  20. Replies
    11
    Views
    2,563

    Re: MX-3070N "Please Wait"

    I second the paperclip on scan pwb. I have had that a handful of times !
Results 1 to 20 of 20