Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds; generated 35 minute(s) ago.

  1. Replies
    6
    Views
    158

    [Jamming] Re: c458 jamming at reg rollers.

    does the paper make it under the registration roller? Meaning does it stick out on the other side of it?
    Does the paper wrinkle?
  2. Replies
    5
    Views
    241

    Re: Bizhub C558 heater settings

    Cant see anything related to that.
    Escalate it to the guys in the know could help, hope there is someone here.

    Sell a staple finisher?
    Color page insertion on every set to separate them before...
  3. Replies
    5
    Views
    241

    Re: Bizhub C558 heater settings

    Do you think it needs to cool down on the sides before it starts the SEF prints?

    There is some fuser switches under Enhanced Security Mode under Engine Dip Switch Settings.
    Read all about that in...
  4. [Error Code] Re: Bizhub c454e Error code C - D3A0 (Afther updating firmware)

    Try an older version of firmware?
    SSD seems to be central to this.
  5. Replies
    9
    Views
    440

    Re: Konica Minolta fuser NTC

    The PID control values in the firmware makes a big difference to the heat control.
    You would need to calibrate it yourself if you can't find a datasheet on it.
    Should handle the heat ok.
    Even...
  6. Replies
    9
    Views
    440

    Re: Konica Minolta fuser NTC

    What kind of project?
  7. Replies
    9
    Views
    291

    Re: C364 printers with various errors occurring

    The USB issue should be corrected by allowing it to work under security > userbox settings.

    Does the data light stay on if you use a laptop directly?


    Did you perform initialization?
    ...
  8. Replies
    12
    Views
    2,036

    Re: The maximum number of copies made by a MFP

    Those 1052's are just about run in and ready for a lot more. Know about a 1250 with about 4 times that on.

    Have a 363 on 1.6M only possible with tray 3 and 4 tray 1 and 2 drive gears don't go that...
  9. Replies
    11
    Views
    1,057

    Re: C368 faded and enlarged

    Add some color to those prints.
    That would give more info.
    If the registration stays ok its secondary or primary.
    If its black only it could be drum?

    Stretched print is something running to...
  10. Replies
    6
    Views
    355

    Re: Konica 654 transfer unit rebuild..

    The supplier of the 3de party parts should give you instructions.
  11. Thread: PF-707

    by allan
    Replies
    12
    Views
    417

    Re: PF-707

    Will take 3 to 4 weeks to get it here.
    It comes with the PF but this one was never installed as a primary PF and the sensor assy since have been lost in transport...
    My friend needs this machine...
  12. Thread: Kyocera Toner

    by allan
    Replies
    7
    Views
    584

    Re: Kyocera Toner

    Yea THS toners works great. Problem is it became to expensive for us to import...
    The bizhub machines loved that stuff. One some models i would argue its somehow better than original dare i say.
  13. Thread: PF-707

    by allan
    Replies
    12
    Views
    417

    Re: PF-707

    Thank you.

    Hope that would be available to me here.
    Will check and let you know.
  14. Thread: Vacuum cleaner

    by allan
    Replies
    12
    Views
    829

    Re: Vacuum cleaner

    Yea 3M and other good vacs will prevent you from toasting electronics.
    Was vacuuming up a toner spill with an unearthed machine standing on a rug.
    The moment i stepped of the rug an arch zapped...
  15. Thread: PF-707

    by allan
    Replies
    12
    Views
    417

    PF-707

    Hi guys sorry for the bother.
    Need a part number for the PS40 centering sensor for a PF-707.

    This unit was installed as a second PF for a C1100 but now need to use it on another machine.
    Would...
  16. Thread: Biz Hub 658e

    by allan
    Replies
    15
    Views
    729

    [CQ] Re: Biz Hub 658e

    Does the sensor flag above the transfer roller pop back freely or plugged in?
    But i think that would be J2002.
  17. Replies
    8
    Views
    293

    Re: Bizhub c353 scan to folder on mac ?

    FTP?
  18. Replies
    10
    Views
    479

    Re: Bizhube 554e belt

    If the belt is the same lenght and the blade the same then you could build that over if you really want to take that risk.
    Best way is to try and shove it in there, would wonder if the retraction...
  19. Re: C224e / color print, fax activation hex code?

    Ok so you machine was initialized and you have magenta lines on your copies?
    Is the fax set and initialized in service mode?
  20. Re: Konica Minolta C364e Printing Glossy Label a lot of small white dots

    Try to adjust the second transfer current.
  21. Thread: Bizhub 35C-4 ?

    by allan
    Replies
    10
    Views
    447

    Re: Bizhub 35C-4 ?

    Yes that can be changed. Look for a serial number on the body.
  22. Thread: Bizhub 35C-4 ?

    by allan
    Replies
    10
    Views
    447

    Re: Bizhub 35C-4 ?

    Then its a no-name rebrand. The serial number will give away the model.
    Throw some firmware at it...
  23. Thread: Bizhub 35C-4 ?

    by allan
    Replies
    10
    Views
    447

    Re: Bizhub 35C-4 ?

    Now this is where a picture will help.
  24. Replies
    5
    Views
    265

    Re: Konica Minolta Outward E-Learning

    Cornerstone OnDemand
  25. Replies
    56
    Views
    11,073

    Re: Aneurysm it's still the administrator?

    8
    _0
    __D

    Be careful where you aim that at...

    8D Its a smiley face aint it, or you in Siberia.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4