Search:

Type: Posts; User: tekkie

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    293

    [Jamming] Re: Bizhub c224 with DF 624 Doc feeder jam

    Thanks for the help everyone I see the gear clutch assembly but somehow the 3 pin connector for the Df door open/close sensor had come off the board completely refitted it and it was fine ....
  2. Replies
    5
    Views
    293

    [Jamming] Re: Bizhub c224 with DF 624 Doc feeder jam

    I am going back on Friday I will check this
    Thanks for that
  3. Replies
    5
    Views
    293

    [Jamming] Bizhub c224 with DF 624 Doc feeder jam

    Hi guys help needed
    Bizhub c224 with a DF 624.
    Its feeding fine but when it gets a jam the jam won't reset and the pick up rollers don't reset back to up position.
    The only way to reset the jam is...
  4. Replies
    2
    Views
    214

    [Jamming] Bizhub C 308 Jam Code 30-03

    I have a customer complains of jams 2nd time now
    When i arrive its only a couple of jams either tray 1 or tray 3 but always the same code 30-03 which indicates jam in 2nd transfer area
    I have...
  5. [Dead] Re: Canon iradvc 3525 Black screen energy save light on

    It was THE main controller board
    Cheers
  6. [Dead] Canon iradvc 3525 Black screen energy save light on

    I have a Canon iradv C 3525 The mc switches on and cycles but control panel is all black and energy save button is lit
    I am returning on Monday with low voltage power supply I just wondered if any...
  7. [Misc] need to turn off the actitivity report that prints out

    I have ricoh imc 300 that prints off an activity report periodically
    How can i disable this or turn it off
  8. Replies
    2
    Views
    4

    [Misc] Need to turn off activity report print

    Hi GUYS i HAVE A Ricoh IMC 300 can anyone please advise where you can turn off the activity report print that prints off automatically periodically
  9. Replies
    8
    Views
    809

    Re: Bizhub C250i New machine DF Jams

    Sorry my mistake it is a DF - 632
  10. Replies
    8
    Views
    809

    Bizhub C250i New machine DF Jams

    We have installed a brand new Bizhub c 250i last week and the customer has reported DF jams when scanning both for copy and scan to email
    Its the standard DF. I was very sceptical when I attended...
  11. Replies
    2
    Views
    552

    Tray 1 not lifting Canon iradvc 3525

    Hi GUYS
    i HAVE A canon iradvc 3525 where tray 1 does not lift and theres no error code.
    Tray 2 is ok
    The cassette shuts ok and knows its A4 it actuates the little white lever at the back and the...
  12. [Misc] Re: Bizhub C250i Doesnt boot properly after sleep mode

    Yes its K8 firmware
  13. [Misc] Bizhub C250i Doesnt boot properly after sleep mode

    Hi Guys
    I have an issue with a Bizhub C250i that doesnt always wake up after going in to sleep mode.
    I have upgraded firmware to latest version and am waiting to see if problem is resolved but...
  14. Replies
    14
    Views
    1,378

    [Jamming] Re: Bizhub c 224 Jam every copy

    Hi GUYS Thanks for the advice on this I went back Friday morning with a whole fuser drive assembly that our workshop engineer had stripped out of an old mc I followed the great advice on here and...
  15. Replies
    14
    Views
    1,378

    [Jamming] Re: Bizhub c 224 Jam every copy

    Thanks for all the advice guys Im going bck with cl 8 tomorrow will let you know
  16. Replies
    14
    Views
    1,378

    [Jamming] Bizhub c 224 Jam every copy

    Hi Guys


    I have a bizhub c 224 mc that jams every copy jam code 30-03 all trays all sizes
    It reaches the fuser unit and feeds out about half an inch doesnt quite hit the exit sensor and jams...
  17. Thread: Ricoh imc300

    by tekkie
    Replies
    6
    Views
    720

    [Jamming] Ricoh imc300

    I have had an issue with a new imc 300 DF that has high usage on scan.
    It comes up with a JOO1 code which on this machine is the DF reg sensor
    There are only 2 sensors on this DF 1 paper set...
  18. Replies
    3
    Views
    427

    [Misc] Re: Bizhub C35 wont print landscape

    Hi guys thanks for the advice tried formatting hard drive that didnt work in the end I just flattened the mc by initialising it completely this sorted the issue out
  19. Replies
    3
    Views
    427

    [Misc] Bizhub C35 wont print landscape

    I have a Bizhub c35 that wont print landscape from any pc
    I have tried several different drivers and the customer has another 2 same C35s mcs in the same office and they are ok with the same ...
  20. Replies
    1
    Views
    369

    [Jamming] Ricoh imc 300 Doc Feeder Jams

    Has anyone else had problems with the new Ricoh imc 300 Doc FEEDERS We have got 2 mcs doing the same thing df jamming at pick up.We have stripped both down replaced all feed and sep and cleaned all...
  21. [Misc] Re: Bizhub c 250 Time cannot be adjusted error message

    [QUOTE=srvctec;1738471]I can almost guarantee this is it. See it all the time on other KM machines when the IT guy blocks the port or machine from accessing it after turning that feature on.

    Just...
  22. [Misc] Bizhub c 250 Time cannot be adjusted error message

    I have a kon minolta bizhub c250 that is working fine copy print and scan but it has a message alert flashing on and off on the copier screen saying
    the "time cannot be adjusted"
    I have checked...
  23. Thread: Xerox 7225 jam

    by tekkie
    Replies
    5
    Views
    809

    Re: Xerox 7225 jam

    I had 4 mcs all doing the same thing on my area followed all edocs advice re new ItB AND SPACER AND EVEN REPLACING BLACK DRUM FOLLOWED ALL edoc advice still jammed same place same code take my word...
  24. Replies
    12
    Views
    1,092

    [Misc] Re: Bizhub c283 2 problems

    Thanks for the advice guys sorry its a Kon minolta bizhub c227 It is a colour mc hope this helps
  25. Replies
    12
    Views
    1,092

    [Misc] Bizhub c283 2 problems

    I have 2 problems on the same mc that I require help and advice on
    Firstly someone has changed the 9272927292729272 log in for service mode so im unable to log in
    How can I resolve this pls...
Results 1 to 25 of 92
Page 1 of 4 1 2 3 4