Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.49 seconds.

  1. Re: Bizhub C220 paralell lines at soft color prints. Transfer belt? + Photos

    Yeah, I'm voting for the cyan developing unit also, maybe the drum too. Marks affecting quality on the primary transfer belt would affect all colors equally. Since the other colors (MYK) look OK, I'd...
  2. Replies
    2
    Views
    94

    Harmless whining.

    So you show up at a call ... by all appearances every part on the machine is worn out. Next step: print off the maintenance counters. What do you see? After 2 years and 1.3M prints the part counters...
  3. [Misc] Re: mystery part between taskalfa 4550ci and PF740; also request suggestions on join

    Agreed. that part is fitted AFTER the MFP is resting on the PF unit. If you fit it before, it will become broken again. See item D, page 8 of the installation guide, attached to TBS's post. =^..^=
  4. Re: C759 C659 thin lines on color IU at 60 K - 90 K

    I can't explain why, but it's usually cyan that fails early. =^..^=
  5. Replies
    19
    Views
    905

    Re: color line probleme

    Correct. =^..^=
  6. Re: Konica C552 does not recognize A5 size on all trays and bypass

    Are you loading the paper LEF or SEF? It will feed SEF but is to short for LEF.
    =^..^=
  7. Replies
    19
    Views
    905

    Re: color line probleme

    Once they show "Replace..." Flipping the soft switch for the consumables will only affect the next replacement. If it were me I would turn off the comsumable popup, but until you install new drums it...
  8. Replies
    7
    Views
    690

    Re: Hi .. I've just arrived here.

    Welcome! =^..^=
  9. Replies
    19
    Views
    905

    Re: color line probleme

    If I were to make a guess I'd say the spout that carries the primary transfer waste toner to the waste bottle is likely clogged. From there the primary transfer cleaning unit backs up until the waste...
  10. Replies
    18
    Views
    681

    Re: Double Image in Copies

    I'm going to go in an entirely different direction:

    I'm going to guess that it's happening on copies ONLY, not prints.

    When you cleaned the optics, I'm betting that you removed a couple of the...
  11. Replies
    4
    Views
    386

    Re: Site Troubles

    I haven't had much luck finding bulletins or QAs even when I know they're there somewhere. I think it's just not a very good search engine. =^..^=
  12. Replies
    11
    Views
    847

    Re: C368 faded and enlarged

    Were I to take a WAG, I'd guess that the transfer belt was slowing down. Why?:

    Maybe because the primary transfer belt is difficult to turn.
    Maybe because the drive coupler is jumping.
    Maybe...
  13. Re: Taskalfa 5551ci service mode entering code changed

    I don't know if this PreScribe command still works on the AlphardII series, but you might try an Engine Reset:

    Send the following PreScribe command: !R! ACNT "REST";EXIT;
    =^..^=
  14. Replies
    11
    Views
    847

    Re: C368 faded and enlarged

    How much enlarged? =^..^=
  15. Thread: hello sir

    by blackcat4866
    Replies
    7
    Views
    568

    Re: hello sir

    Welcome! =^..^=
  16. [Jamming] Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    What jam codes are you getting?

    =^..^=
  17. Replies
    11
    Views
    847

    Re: C368 faded and enlarged

    How much enlarged? From which paper source? Using the DF?
    Have you given any thought to doing image adjustments? =^..^=
  18. [Jamming] Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    Is it safe to say that induction scooters are feed rollers? Your translation software missed the mark by a little.

    The pickup roller is smaller than the others. I don't have a substitute for that...
  19. Re: Lexmark- xs748de slow copies and printing

    Dying power supply can cause a flickering screen accompanied by a loud buzzing noise, in sync with the flipping. Of fuser codes. Or dead machine. At least those are the things that I've seen. At this...
  20. Replies
    4
    Views
    299

    [Funny] Re: What Kyocera attachment is this? :D

    Yeah its a booklet maker sans finisher snuggled up to the DP. Interesting! =^..^=
  21. Replies
    7
    Views
    534

    Re: Kyocera Toner

    This is true of Canon monocomponent as well. I've had poor results from all generic monocomponent toner.
  22. Replies
    6
    Views
    305

    Re: Konica 654 transfer unit rebuild..

    I've only disassembled two. The one that was broken when it was removed without removing the right door stoppers, and the one with the torn belt that donated the broken plastic guides to repair the...
  23. Replies
    12
    Views
    3,424

    Re: Scan/Fax Disabled Bizhub C451

    You should check that the scanner is not errored out or isolated. Check error codes and jam codes. If you can print do a management report. =^..^=
  24. Re: Kyocera 3050ci fax, confirmation and scanning and forwarding

    I believe on Kyocera's you don't choose the tray, you select a specific media type for all faxes and fax reports. So if you want your faxes and fax reports on paper from a specific tray select the...
  25. Replies
    3
    Views
    289

    Re: Scan error 7100

    Scan to email? Perhaps you're exceeding the attachment size limit? Perhaps you could try monochrome instead of color scans, 200 instead of 600 dpi, less pages, etc.?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4