Search:

Type: Posts; User: copyaction

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    8
    Views
    332

    Re: change series to Ricoh MP 4055

    Do you mean serial number?
  2. Replies
    29
    Views
    870

    Re: Mpc2003 faint colour pattern

    Exactly.
    All that money they “saved” using cheap toner is now going to be buying new dev units.
  3. Replies
    7
    Views
    337

    Re: Ricoh MP 3053 side door issue

    Yes, just like the earlier generations of these.
  4. Replies
    7
    Views
    337

    Re: Ricoh MP 3053 side door issue

    In one case where I had a customer continually breaking these, I modified the fuser removing the 2 arms and replacing the tension springs with longer ones. Never had an issue again.
  5. Re: MP C2503 evenly spaced black bars on prints and copies

    Only 34k but I’m going to try it anyway since it makes the most sense by the spacing.
    Thanks.
  6. Re: MP C2503 evenly spaced black bars on prints and copies

    It is approximately 1.5 inches (38mm) between lines.
    Total page counts are 13,000 color and 34,000 B&W.
    Very clean inside, all I did was pull all the drum units to see if there was anything obvious...
  7. MP C2503 evenly spaced black bars on prints and copies

    Customer called about this and when I went to check it was working fine.
    Just sent me a text with doing again, had them print a counter sheet and it was on that too.
    Paper is from drawer 1, 11x8...
  8. Replies
    18
    Views
    674

    Re: Ricoh MP2555 dual fax line?

    They have 2 dedicated fax lines
  9. Replies
    18
    Views
    674

    Re: Ricoh MP2555 dual fax line?

    So this is in addition to the Type M29 fax?
  10. Replies
    18
    Views
    674

    Re: Ricoh MP2555 dual fax line?

    Apparently they already have that enabled because he said they had to buy a standalone fax machine using the second line as a workaround.

    Do you happen to know what the part number for the second...
  11. Replies
    18
    Views
    674

    Re: Ricoh MP2555 dual fax line?

    No other changes made, I literally wheeled out 2550 and wheeled in the 2555.
    They would happily spring for another fax number if it makes the issue go away.
  12. Replies
    18
    Views
    674

    Re: Ricoh MP2555 dual fax line?

    I would have to agree with you.
    This is a very busy medical center and they do have a ton of incoming faxes, more so than non-faxes.
    I actually still have their old unit so I will hook it up and...
  13. Replies
    18
    Views
    674

    Ricoh MP2555 dual fax line?

    Looking for the possibility of installing a second fax line on this machine.
    Customers IT sends me this complaint that fax line is not disconnecting quickly:
    “When a fax comes in, it is holding...
  14. Ricoh MP2555 Fax to network destination issue

    Customer’s IT guy says they set up the fax forwarding and it works, then the next day it is printing faxes again.
    Any idea if this is a known issue or something I can look for if I go check it out....
  15. Re: customer moved and want to use a cell phone hot spot to print/scan?

    Yes it was scan to folder.
  16. Re: customer moved and want to use a cell phone hot spot to print/scan?

    I have connected an MPC 2503 to 2 computers with a 5 port switch in the past with no internet at all.
    The only thing I remember is that it ended up with a 169.254.xxx.xxx IP address, but it was able...
  17. Replies
    11
    Views
    600

    Ricoh MP C2004ex scanning OCR question

    Admittedly I have zero experience with this, but I have a lawyer customer asking about it.
    From the searches I’ve seen it appears any embedded solutions are unreliable at best.
    What would be the...
  18. Re: MP C2004 auto color calibration in user tools says “no paper”

    When I went to load one the other direction I noticed they were set for “recycled paper”, I set them to “do not display” and it worked.
    Thanks for the tip.
  19. MP C2004 auto color calibration in user tools says “no paper”

    Trying to run auto color calibration in user tools - maintenance it says No Paper.
    Has paper in both drawers and shows correct size.
    Copies fine and prints fine from computer from both drawers....
  20. Replies
    10
    Views
    1,283

    Re: Ricoh 2852 SC 899 Code

    I had one that would not resolve until I updated firmware AND replaced HDD.
  21. Re: Ricoh MP2851 Repeating (10~11mm) white bands in black regions

    For this model no modification is needed, you just have to manually run developer initialization.
  22. Replies
    10
    Views
    454

    Re: MP5054SP odd delay

    Yes we used that to turn on Fusing Idling on several models and that could account for that delay you are describing on the initial run, and why it wouldn’t need it on the subsequent run.
  23. Replies
    16
    Views
    1,014

    [CQ] Re: Ricoh MP3353

    As was already mentioned this has been a common problem since the 1022 series.
    The question is how many copies on the developer?
    If it is over 60,000 it is definitely suspect.
  24. Replies
    4
    Views
    403

    [Misc] Re: Abnormal noise in the MP 5055

    +1
  25. Re: Canon imageCLASS MF6540 intermittant blank pages

    Haven’t been back yet but someone suggested running CLEAR in service mode, so I will be trying that when I get over there.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4