Search:

Type: Posts; User: AlbertK

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    893

    Re: TASKalfa 3010I intermittent black prints

    It most certainly is a High voltage arcing problem.
    What happened before the lines started. Did you or someone else replace anything or work with the harnesses, maybe pinch a wire? I would clean...
  2. Replies
    12
    Views
    2,767

    Re: DP-7100 on 4002i

    Hi,
    I have a similar problem on a TA-3011i.
    DP Plate lifts up but rollers don't turn to feed originals.....then Jam 9005 or 9011.
    Did you manage to sort the problem with just the replacement of...
  3. Replies
    8
    Views
    646

    [Misc] Re: TA 250ci white space

    Hi we need more information.

    The problem could be Drums/ Main charges/ Dev's/ Transfer belt....
    Are the "white space" over all colours equal, are the main charges clean? If so, look at the...
  4. Replies
    8
    Views
    1,097

    Re: Good print, bad copy.

    Thank you all for your input. I confirmed that all the eco mode settings and so on was indeed off and not adjusted and decided to replace the CIS, it did not make any difference.

    I searched...
  5. Replies
    5
    Views
    1,163

    Re: Kyocera M6535 vs M6635 drum issue..

    The marks on the drums is a known problem with this model however there is a technical bulletin with a drum upgrade. I know Kyocera has/had a drum compensation program for this model. Might be useful...
  6. Replies
    8
    Views
    1,097

    Re: Good print, bad copy.

    May I add, the copy quality has become worse over time...
  7. Replies
    8
    Views
    1,097

    Re: Good print, bad copy.

    Thanks darry1322,
    The optics only consist of a sealed CIS Assembly with no mirrors only 1x slit glass....
    I have also tried the original settings text, photo, text-photo but no major...
  8. Replies
    4
    Views
    585

    Re: Minor Color Question

    Both the Registration and Calibration settings are available in the service mode (System Menu).
  9. Replies
    2
    Views
    512

    Re: M6535 cidn vs M6630cidn

    The marks on the drums is a known problem with this model however there is a technical bulletin with a drum upgrade. I know Kyocera has/had a drum compensation program for this model. Might be useful...
  10. Replies
    8
    Views
    1,097

    Good print, bad copy.

    Hay you guys, long time no post.
    If I may, I have a problem with a TA-2200. The print quality is acceptable but the copies are really bad and the whole page is much lighter than the original. The...
  11. Thread: ComColor 9150

    by AlbertK
    Replies
    3
    Views
    1,009

    Re: ComColor 9150

    Oh Hi..
    As you mentioned, we used the "special" cleaning solution on the heads. Ran the deep clean about x3 and it was fine.
    Thank you for the interest.
  12. Thread: ComColor 9150

    by AlbertK
    Replies
    3
    Views
    1,009

    Re: ComColor 9150

    Hey...
    Never mind. We managed to solve the problem.
    Thank you.
  13. Thread: ComColor 9150

    by AlbertK
    Replies
    3
    Views
    1,009

    ComColor 9150

    Good day guys

    I am having problems with a ComColor that is printing blank lines through the images.
    It stated with lines across all the images, colour and mono and after normal and a few strong...
  14. Replies
    4
    Views
    742

    Re: Kyocera TA-4501i Scan problem

    Hi. Thank you all !!
    It does make sense but...If I scan, the original size and copy/scan size is displayed on the device screen as A4.....
    It has the same problem when I scan to mail from the glass...
  15. Replies
    4
    Views
    742

    Kyocera TA-4501i Scan problem

    Good day all
    I have a problem when scanning A4 to mail.
    The image cuts 23mm of the top and bottom of the pages when scanning portrait and when scanning A4 landscape, it rotates the image and only...
  16. Thread: vi 400

    by AlbertK
    Replies
    1
    Views
    454

    Re: vi 400

    Those machines still used Developer as carrier. The Developer in the machine is deteriorated and wont give you correct values.
    If you can still find Developer....replace it. Check the values in...
  17. Replies
    6
    Views
    4,983

    Re: TASKalfa 3051ci error C2840

    I had the same problem on a higher volume machine and found a bulletin regarding the change of the TR cleaning section for models before a certain serial number.
    Had to do Firmware and change TR...
  18. Replies
    6
    Views
    1,789

    [Misc] Re: Kyocera KM 4050 and LDAP

    The address book should be setup using the " Address Editor" on any local PC.
    Not sure if it will work on newer PC's running Win 7/8/10.....
    Not even sure if LDAP could communicate with these...
  19. Thread: FS-2100DN

    by AlbertK
    Replies
    2
    Views
    652

    [Jamming] Re: FS-2100DN

    Hi. Thanks for the reply. I confirmed with KYOCERA HQ that the clutches are in fact the same.
    This will be a repeat repair and as the fault was intermittent I already replaced the A5 modification...
  20. Thread: FS-2100DN

    by AlbertK
    Replies
    2
    Views
    652

    [Jamming] FS-2100DN

    Hi
    I have FS-2100DN with constant jams from the standard cassette. I know it is the clutch...

    Any one know if the PF clutch and the Dev drive clutches are the same? They do look the same, but I'm...
  21. Re: New A-Series (306ci, 356ci, 406ci) - Thoughts?

    I have a 356ci running since June last year at a customer that does advertisements and fliers !!!? Wrong machine, I know, but he sourced it from somewhere and I maintain it. Thus far I only had one...
  22. Replies
    3
    Views
    1,666

    [Error Code] Re: Kyocera 8000i with C2610 error code

    Hi. I had the same problem on same model and it was a broken gear in the gearbox of the feed unit for trays 3 and 4.
  23. Replies
    1
    Views
    449

    Re: firmware compatibility

    Hi
    I would suggest you try to set the correct OEM (mode 265) for your country on the machine to display the Kyocera model.
    While in that state of OEM the firmware will work and you can then change...
  24. Replies
    5
    Views
    2,426

    Re: Kyocera 3510I /JAMMING

    Hi
    What happens if you test the sensors in service mode?
    If the sensors test correctly you might have a Engine PWB problem.
    Try updating the firmware before anything else.

    Good luck
  25. Thread: TWAIN Scanning

    by AlbertK
    Replies
    6
    Views
    1,329

    Re: TWAIN Scanning

    Thank you all.

    The problem with just normal twain scanning is that it pulls all the documents to the PC as single image files. Imagine attaching a 30 page document...
    I found NAPS not so simple...
Results 1 to 25 of 89
Page 1 of 4 1 2 3 4