Search:

Type: Posts; User: Canuck

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: When the Canon cant Browse to set SMB Scanning shortcuts - Checklist.

    I've had to install the special firmware many times, but yes, no upgrade, lose email(SSL/TLS issues). FTP is the way to go. Port 587 is prettywell the standard now for email. Gmail needs 'less secure...
  2. Replies
    6
    Views
    350

    [Misc] Re: Import/Export address book via USB

    I use it all the time...it's so convenient
  3. Replies
    4
    Views
    352

    [CQ] Re: Opinions on what the problem is

    Meter reading on machine?
  4. Re: When the Canon cant Browse to set SMB Scanning shortcuts - Checklist.

    Special firmware for SMB 2/3. I've had to install it on tons of machines for scanning to file issues
  5. Replies
    3
    Views
    400

    [Error Code] Re: Canon c7260i error code : e197-2000

    Carefully inspect inside the connector on the drawer and inside machine that it seats into. Customers don't read instructions to turn knobs before pulling out fixing feeder assembly, and paper tears,...
  6. Thread: c2220i jam

    by Canuck
    Replies
    23
    Views
    798

    Re: c2220i jam

    If it is doing it only on printing, there is nothing mechanically wrong in the machine. What jam code? What does it say as the paper source for the Jam? Paper size indicated for the Jam? This sounds...
  7. [Misc] Re: Canon IR Adv C5045 TCP/IP detecting able to manage via web, not printing though

    "732" errors are some type of reader communication error usually on Canons. I would update the firmware for starters. If it comes back, reseat main con 1 and 2,back up rCon,clear it,restore it(or put...
  8. Re: Canon iR1025n Excellent copies, washed out prints

    Make sure "toner saver" is not "checked" in the driver. Check settings on copier in "printer settings"(density, etc).Windows test page light? What driver are you using? If it's Generic Plus UFR, make...
  9. Re: ADV 4225 blank screen when on and error e0355-004

    E 355 errors are serial number/series mismatches for pcb communications...something got mixed up or it's not the exact same controller. Did you transfer the RAM also? The machine is far from...
  10. Replies
    15
    Views
    672

    [Jamming] Re: IRADv6055 jamming every time J0113

    Yes oiling will loosen them up enough to verify issue but these are Oilite bushings are are not meant to be oiled. If you oil them, it mixes with paper fibers,toner etc and seize again. Oiling gets...
  11. Replies
    16
    Views
    699

    Re: canon c5535i veryslow doesn't recognize ink

    Check with NWRS, FK4-1550 is part number. Not sure, maybe get it loaded with firmware. 3rd editions(irac 5535III, etc) have a copy of firmware on main con so machine can boot and be flashed through...
  12. Replies
    16
    Views
    699

    Re: canon c5535i veryslow doesn't recognize ink

    You won't get into service mode with dead HDD. As mentioned, you need a Canon HDD(NWRS or Hytec are authorized and cheaper than direct from Canon). Sorry, I can't supply copy of firmware(I value my...
  13. Replies
    15
    Views
    672

    [Jamming] Re: IRADv6055 jamming every time J0113

    Because they use stepper motors now instead of clutches, when the bushings in the delivery assembly get gummed up, the load causes the stepper motor for the delivery drive to stall(old DC motors...
  14. Replies
    16
    Views
    699

    Re: canon c5535i veryslow doesn't recognize ink

    You"ll need firmware...load it onto USB, boot up safe mode
  15. Re: Canon C3530 Black/Grey band. SOLVED! Special Bulletin Report.

    Enough is enough
  16. Replies
    33
    Views
    1,160

    Re: Canon iPF670 printhead error

    You're gonna help me?LMAO. You've sold 25? I've done probably over 2500 service calls on Imageprografs over the years, and probably 25000 calls on copiers..lol. Adios...you seem to know everything
  17. Replies
    33
    Views
    1,160

    Re: Canon iPF670 printhead error

    No, you make a simple problem costly by throwing parts at it. I see you're not a tech. There is a difference between ink absorbers and cap absorbers..lol. And when it errors after that? Many times...
  18. Thread: Canon C3530i

    by Canuck
    Replies
    80
    Views
    2,111

    [CQ] Re: Canon C3530i

    Imagerunner Advanced Colour C3530i? Switch black drum with yellow. Still there? Replace the black dev assembly., as "copier tech" suggested. A dirty laser path would lighten the image, not cause a...
  19. Replies
    33
    Views
    1,160

    Re: Canon iPF670 printhead error

    If the cap absorbers get plugged up(which they do all the time), or the drain holes under them get clogged, you can replace printheads until you're blue in the face and it won't resolve it. Probably...
  20. Replies
    6
    Views
    430

    Re: iRC5045 drum won't reset automatically

    The new drum has a fuse that is opened when installed, resetting the life counter to "0". These machines measure drum film thickness to calculate drum usage(%)
  21. Re: Canon TX-4000 error (EC21-2F61/Can't access service mode to change the printhead

    "As a tech"..lol...I would pop off side cover and uncap at purge unit. Getting into service mode then out if it might be necessary to clear error. Yes..I know it's a crap-shoot to get into service...
  22. Replies
    5
    Views
    328

    Re: iR ADV C3520i Gen 1 - "Ghosting"

    Machine meter? Drum counts? Run test page 10, then shut off 3 colors at a time in pg 10 and see what you get. Shouldn't need incorrect paper registration,etc. Looks like drums to me..contaminated...
  23. Replies
    14
    Views
    1,708

    Re: Canon IR Advance 6555i Light copies and prints

    I've lost count of how many stirring rods that I've changed on these things..
  24. Replies
    10
    Views
    496

    Re: Canon iR ADV C5250 Black Drum Sensor

    When it fails auto-color mismatch, it is failing setting up color registration. Itb wandering, patch readers dirty possibly...broken shutter(usually throws E020s though) Print a grid(test 6 I...
  25. [CQ] Re: EFI Color Calibration_ColorWise from Command WorkStation

    Make sure your scanner is clean and calibrated(white levels,etc). I've seen colors get massively messed up because techs never clean CIS/CCD or do proper calibrations on the reader. When they scan to...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4