Search:

Type: Posts; User: gkalchik

Search: Search took 0.01 seconds.

  1. Replies
    23
    Views
    2,108

    Lexmark XM3250 printing and copying slow

    I've got a customer's XM3250 that went from 50 ppm to about 17 ppm both copying and printing. Eco settings and quiet mode are off. Paper is set to 8 1/2 x 11, type is set to plain. Resolution set...
  2. Replies
    8
    Views
    853

    Re: MPC307. Wifi scan

    As far as scanning goes there is on more thing to consider. I just found out yesterday that Microsoft updates are disabling TLS 2.0 which is disrupting scanning, especially with Office 365. I...
  3. Replies
    1
    Views
    741

    [CQ] Re: Kyocera M3645 very light copies (fix)

    By the way, I meant to mention in the original post that after replacing the controller board I still had the light copies. It was then that I found that MC setting. I had also replaced the LSU...
  4. Replies
    1
    Views
    741

    [CQ] Kyocera M3645 very light copies (fix)

    I thought I'd give you guys a head up on this one. Extremely light copies, text barely able to see. Pull out the main charge assembly and run a copy. If it comes out solid black, which would...
  5. Replies
    7
    Views
    1,039

    Re: M3540idn & DV-3100: yield?

    Hmm, you're right. I guess they stopped sharing the link. Here's a dropbox link, see if you can download it from that:

    Dropbox - i039_regist_sound.mp3 - Simplify your life
  6. Replies
    7
    Views
    1,039

    Re: M3540idn & DV-3100: yield?

    I'm not able to attach the bulletin or the sound file but it you have access to the Kyocera tech site the bulletin is this: QA_I039_2LV_0102_SB. Might be handy for future reference.
  7. Replies
    7
    Views
    1,039

    Re: M3540idn & DV-3100: yield?

    You might check out the drum unit. I find that it's a source of noise more often than the dev unit. Also, there is a bulletin on squeaking coming from these units from the dev or reg clutches. ...
  8. Re: kyocera m6535cidn cassette 1 lift gear replacement

    All I can say is that at our dealership we have been instructed not to attempt replacement. One of our techs a while back attempted this repair and after 8 hours and gutting the machine to the frame...
  9. Re: Ta 7551 ci Duplexing issue jam code 1313 1314

    I concur with sparkycivic. I had this issue with a 6501i that drove me crazy. It only happened while duplexing. The problem was a rusty middle roller clutch. After replacing the clutch I haven't...
  10. Re: Kyocera taskalfa will not scan to folder on Windows 10

    Have you tried setting up a local user and properly sharing it to the folder? I have found that using the user the customer sets up (the Microsoft users) doesn't work.
  11. Re: SMB scanning in Windows 10 Azure Active Directory environment

    This has been my experience.
  12. Replies
    5
    Views
    6,504

    [Dead] Re: TASKalfa 5500i System Error F000

    I just had this code on a TA6500i. Updating the firmware took care of this one.
  13. Replies
    10
    Views
    1,705

    [CQ] Re: What is causing this?

    I may be way off base here, but I had several similar situations with a Ricoh products. Try this: Lift up on the front left corner of the scanner while making the copy and see if it changes the...
  14. Thread: MP-2851

    by gkalchik
    Replies
    9
    Views
    1,042

    [CQ] Re: MP-2851

    I can attest to this SP setting.
    Long ago when I started to service these line of Ricoh copiers I just automatically changed the settings of this SP to max.
  15. Replies
    14
    Views
    3,465

    Re: Kyocera 300I/ Copystar CS300I adf problem

    I agree that the hinge could be the issue. I had this once but on mine someone installed the wrong hinge . It was doing exactly as you describe.
  16. Replies
    18
    Views
    3,547

    [Jamming] Re: Ricoh MP 6001 ADF misfeeds

    You might also want to check/clean/replace the one-way bearings. Is it the same jam code when it jams or does it vary? What is the jam code?
  17. Replies
    30
    Views
    2,430

    Re: vertical fading

    You don't give to many details. I assume this is a black print issue. In addition to what was already mentioned you could be dealing with a faulty drum unit or transfer unit among other things. If...
  18. Re: Windows 10 SMB Scan to Folder MP 2852 Problem

    If the firmware is where it should be there is another thing you might try. I don't know if this holds true for Ricoh products but the area I work in now is mostly populated with Kyocera products. ...
  19. Replies
    11
    Views
    11,072

    Re: FS 3140 - How to reset Web Password?

    Thanks! I may never need this but it's nice to have in your back pocket. I found out it also works on the 520i.
Results 1 to 19 of 19