Search:

Type: Posts; User: nathicana

Page 1 of 5 1 2 3 4

Search: Search took 0.21 seconds.

  1. Replies
    1
    Views
    127

    HP P3015 tray 2

    This HP P3015 jams every time from tray 2 the standard drawer. Rollers don't turn at all. Paper feeds from tray 1.

    Jam is 13.01.00

    I can hear a thump when testing pickup solenoid for tray 2....
  2. Replies
    4
    Views
    1,443

    Re: Hp laserjet p3015 13.01.00 error

    I'm having to work on the same model with a 13.01.00 jam problem.

    Another technician worked on it, took it all apart and now there is a 59.30 no fuser rotation code.

    Do you know what fixed the...
  3. Replies
    14
    Views
    3,130

    Re: 8002i Jam 6510

    Has anyone tried this bulletin for jam 6510 on a DF-7110?

    It is recommended for the DF-791 but the design looks to be identical
  4. Thread: F041 code

    by nathicana
    Replies
    9
    Views
    343

    Re: F041 code

    Thanks, I was wondering what component may have caused this if it wasn't a connector problem. I had tried the ISC pwb and the CCD so the lamp circuit may have been the culprit.
  5. Thread: F041 code

    by nathicana
    Replies
    9
    Views
    343

    Re: F041 code

    I replaced the scanner section and the machine began working. I agree that there may have been a bad connection somewhere.

    Good thing we had a machine in our junk room to take this from.

    ...
  6. Thread: F041 code

    by nathicana
    Replies
    9
    Views
    343

    Re: F041 code

    ISC board YC3 and YC4 are the only connectors that go to the main board. One is a red SATA wire the other a short 8 wire harness. I replaced both of these and the two boards have been changed also....
  7. Thread: F041 code

    by nathicana
    Replies
    9
    Views
    343

    Re: F041 code

    I replaced the SATA wire and the gray wires that go between the ISC pwb and main board with ones from a recently working machine, no change.

    24v was present on the ISC pwb.

    I am in the process...
  8. Thread: F041 code

    by nathicana
    Replies
    9
    Views
    343

    F041 code

    This 5501 machine has an F041 code, communication between main pwb and ISC pwb. Tried main pwb, Isc pwb, hard drive, CCD

    Can enter maintenance mode and see that in sim 019 there is no scanner boot...
  9. Replies
    2
    Views
    228

    Re: M3550DN spring part number

    I called Kyocera parts and they gave me the number.

    302LV31220 spring fuser
  10. Replies
    2
    Views
    228

    M3550DN spring part number

    Hello,

    I need to remove the notorious right cassette guide on an M3550idn.

    There is a drive coupler spring that is damaged so I will need to replace it.

    I cannot come up with a part number...
  11. Re: Taskalfa 307ci ...... Cannot Log into command centre

    If you ran u021 that would have reset the command center password. I think the F code is the problem, not a password change.

    Can you try connecting your laptop directly to the machine with a...
  12. Replies
    6
    Views
    1,348

    [Error Code] Re: Memory Full Message

    I found the thread I started here when I had this problem:

    4002i warning low memory
  13. Replies
    6
    Views
    1,348

    [Error Code] Re: Memory Full Message

    It happened once to me during initial setup. Next day the problem went away. It did seem to happen after submitting the KFS access code. The memory light kept blinking and the machine displayed...
  14. Replies
    6
    Views
    858

    Re: Bizhub 4050 CE password

    Maybe there is not a report

    Thank you
  15. Re: Remove CE password requirement from Bizhub 4050

    We took this machine in for lease return. I am asked to overwrite the hard drive and get a data report. We are a Kyocera dealer so sorry for the dumb questions but I have no choice in this matter.
    ...
  16. Replies
    6
    Views
    858

    Re: Bizhub 4050 CE password

    Yes I can see that it has an HDD but not where to do the logical format.

    I need to overwrite the hard drive and get a data report to print out.

    On other Konica Minolta machines the hard drive...
  17. Re: Remove CE password requirement from Bizhub 4050

    Thank you. Two times worked. Can't find logical format though.

    Anybody know where that would be? I looked in State Confirmation
  18. Replies
    6
    Views
    858

    Re: Bizhub 4050 CE password

    I got in by stop 09317 then 92729272

    I can't find logical format though in state confirmation

    Is there a way to logical format on a Bizhub 4050?
  19. Re: Remove CE password requirement from Bizhub 4050

    What is the default CE password? I'm locked out of one trying to get into service mode

    Thanks
  20. Replies
    6
    Views
    858

    Bizhub 4050 CE password

    Can someone help me get into service mode? It asks for CE password and now says "locked after failed attempts" because I kept trying the wrong password.

    Is there a way to clear that and what is...
  21. Replies
    31
    Views
    2,438

    Re: C654e data overwrite

    After the overwrite the report printed and there was a message to turn the main switch off.

    I did that and when I turned the machine back on it displayed "reset the encryption code or format hard...
  22. Replies
    31
    Views
    2,438

    Re: C654e data overwrite

    The company likes this report to print out as verification that the data has been deleted
  23. Replies
    31
    Views
    2,438

    Re: C654e data overwrite

    Yes, but the d012 code appeared prior to the format when I restarted the machine after the overwrite.

    I then did the logical format in service mode but it was too late.

    Does the logical format...
  24. Replies
    2
    Views
    403

    Re: Need Firmware

    I managed to get the machine running without doing the firmware
  25. Replies
    31
    Views
    2,438

    Re: C654e data overwrite

    Update to the d012 code after running overwrite HDD:

    I got around the code by changing the HDD to "not set" in system 2 of service mode.

    I'm wondering now if I should ever remove the customer's...
Results 1 to 25 of 119
Page 1 of 5 1 2 3 4