Search:

Type: Posts; User: aabs

Search: Search took 0.01 seconds.

  1. Replies
    11
    Views
    682

    Re: Scan to email using GMX SMTP server

    Yep, these were enabled anyway as the customer uses a smart phone aswell as laptop to collect emails.
    Its getting so difficult these days to find a simple SMTP relay using port 587 and simple SMTP...
  2. Replies
    11
    Views
    682

    Re: Scan to email using GMX SMTP server

    Thanks DFM914

    I tried 587 with no encryption first with correct use/psswd before trying SSL.
    Both 587 no encryption & 465 SSL do not work on the MFD.
  3. Replies
    11
    Views
    682

    Scan to email using GMX SMTP server

    Hi Guys,
    Im trying to get scan to email working with GMX SMTP server.
    Used the following
    mail.gmx.co.uk
    {somebody@gmx.co.uk}
    {password}
    Port 465
    SSL

    Model im trying to get this working...
  4. Replies
    8
    Views
    5,324

    Re: "Set Fusing unit Correctly" will not go away

    "set fuser unit correct" will also appear after the BICU eeprom has been replaced due to the area selection being the wrong country.
    Set in factory SP to the correct location & reboot.
  5. Replies
    3
    Views
    552

    Obtaining IP Config Estudio 3040

    Hi All,
    I am getting no assistance from a large network administrator.
    I have to replace all Toshiba devices on the network and would ideally like to use the static address these devices are...
  6. Replies
    0
    Views
    356

    [Misc] Wrong Model Number after new CTL fitted

    Change model number in factory SP 5907
  7. Thread: MP C305 SC866

    by aabs
    Replies
    8
    Views
    3,250

    Re: MP C305 SC866

    SC866
    NCS_OPT1.mod

    update network support FW D1175430Q
  8. Thread: mpc305 sc452

    by aabs
    Replies
    9
    Views
    6,578

    Re: mpc305 sc452

    Had a machine with sc452 due to damaged side cover.
    Now rebuilt with new side cover.
    No sc452 anymore but pale cq at paper transfer.
    PTR bells out to earth so thing bias terminals all good....
  9. Thread: MP C3002 SC672

    by aabs
    Replies
    0
    Views
    887

    MP C3002 SC672

    Machine wont boot.
    Stuck at please wait and SC672 on display.
    Wont boot from SD card.

    Replace CTL PCB and all good again;)
  10. Replies
    3
    Views
    2,980

    Re: Problem with RSS cable call service

    First thing I checked already set to 0
  11. Replies
    3
    Views
    2,980

    Problem with RSS cable call service

    Hi guys,

    One of my customers has a SPC430DN displaying "problem with rss cable call service"
    All is working as it should but I cannot get the message to go away.
    Device is connected by ipv4 dhcp...
  12. Re: Ricoh MP C 430 DN "accidental" Memory clear (001 All Clear)

    Sp2-111 force line position when to far out for user colour registration
  13. Replies
    7
    Views
    1,444

    Re: Ricoh MPC2500 add toner message

    Yeah that's the clutch and are all same for ea ch colour so a simple switch with clutch from other colour will soon rule in or out the clutch being at fault.
    Part number is also on the clutch when...
  14. Replies
    7
    Views
    2,496

    Re: Printer setting error (mp c3503)

    Seen this a few times.
    you will find that wireless is enabled causing ipv4 Ethernet to set to 11.22.33.44 on dhcp
Results 1 to 14 of 14