Search:

Type: Posts; User: ldfrepairs

Page 1 of 6 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    3
    Views
    19,821

    Re: RZ-220 Error codes

    no generic. ink and master are OEM.
  2. Replies
    3
    Views
    19,821

    RZ-220 Error codes

    Came across an RZ220 displaying error codes D04-560 & D17-237.

    Check the meaning of the codes and troubleshoot. Did not find any cut wires. Replace print cylinder with a working one but error...
  3. Re: IRA4225 Error code E000014-002 displayed

    Thanks will perform nip width test
  4. Replies
    2
    Views
    3,910

    Re: EZ-220 cuts off edge of copy

    The print drum is ok. I have not been able to pinpoint if its scan or master making issue cause its not consistent. will work fine for weeks or months then suddenly, issue appears. was checking if...
  5. Replies
    2
    Views
    3,910

    EZ-220 cuts off edge of copy

    Please find attach samples. original and copy. copy is cut off at the bottom. any suggestion.
    Thanks4470744708
  6. IRA4225 Error code E000014-002 displayed

    I have replaced the fuser film, presssure roller and bearings and error occurs occasionally. I have tested fuser motor and it works properly. Any advice and next step.
    Thanks
  7. Re: IRA4225 Error code E000014-002 displayed

    did you replace thermistor/stats?
    No I did not replace any thermistor

    did you replace any bushings/bearings?
    yes replaced bushings

    did you buy parts a reputable source?
    yes, items were...
  8. IRA4225 Error code E000014-002 displayed

    I have replaced the fuser film and presssure roller and error occurs occasionally. I have tested fuser motor and it works properly. Any advice and next step.
    Thanks
  9. Replies
    0
    Views
    561

    EZ220 Cutter

    Can anyone refer me to where I can buy a Cutter for an EZ220 Riso, besides PRNTNOW. Thanks
  10. Replies
    4
    Views
    846

    Re: ir1435if fuser and dev issues

    I have experienced the same issues. torn film and lines on dev sleeve. just replace film or fuser and dev assembly parts
  11. Replies
    0
    Views
    1,101

    EZ221 P13-232 error code

    Each time a master is cut error code P13-232 and A16-525 are displayed. Maser is cut and a test print is fed but not completely delivered due to the error. I have checked all aspects regarding...
  12. Replies
    1
    Views
    852

    Re: E520-8001 on ir3045

    Title : E520 sub code 8001
    Error :The pick up roller will move towards the rear and start to vibrate, then the E520 is generated with the sub code 8001.

    Workaround :
    Replacing the offset motor...
  13. Replies
    0
    Views
    337

    Canon iR1435 Blur copies

    Printed copies are grey instead of black and lines are slightly blurr. Has anyone come across such a situation:
  14. HP Color Laserjet 2600 toner cartridge cannot come out

    Cannot remove toner cartridges. Cannot find section in Manual to remove main drive assembly to check what is causing this issue. Can anyone tell me what is the cause without having to remove main...
  15. Replies
    3
    Views
    1,228

    Re: canon iR3025 Error E732-001

    Thanks guys will run thru these suggestion and give an update.
  16. Replies
    3
    Views
    1,228

    canon iR3025 Error E732-001

    Trying to figure out what part needs to be replaced to correct this error. My shortcoming is lack of replacement parts. Please advise. Thanks
  17. Replies
    1
    Views
    641

    HP laserjet pro m521 making noise

    Load grinding sound when turned o or making copies. sounds like coming from the Fuser area. cannot find cause all gears are in good condition. any suggestion would be appreciated. Thanks
  18. Replies
    2
    Views
    548

    HP Color Laserjet M551 Printer Duplex

    Have a Color Laserjet M551. Want to make it into a duplex model. I have checked thru parts manual and cannot figure whats the items needed to configure. Any assistance for parts numbers to make this...
  19. [Error Code] Re: Imageclass MF624cw E015-0001 error code

    Do you have a parts diagram to show location of the sensor?
  20. [Error Code] Imageclass MF624cw E015-0001 error code

    cannot find any information on this error code for specific model. Any help would be greatly appreciated.

    Thanks
  21. Replies
    0
    Views
    1,393

    Canon MG2410 reset tool

    In need of reset tool to reset waste ink absorber for MG2410. Cannot find it online. I had tried the manual reset but does not work.
  22. Replies
    2
    Views
    584

    Re: IR2000 how to reset ID

    Thanks will update after I try it.
  23. Replies
    2
    Views
    584

    IR2000 how to reset ID

    Customer forgot ID to access copier and also ID to access registration. Help needed. Thanks
  24. [Electrical] Re: Canon ir 3300 touch panel light NOT Display

    Check and replace the memory, if the display is blank but the power LED is on.
  25. Replies
    0
    Views
    466

    Dell 2155cn poor quality printing

    Clean toner spill and mirrors. Perform alignment; ensure all settings are correct. Does not print the color red.
Results 1 to 25 of 137
Page 1 of 6 1 2 3 4