Search:

Type: Posts; User: bilyahn

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Thread: Device Cloning

    by bilyahn
    Replies
    3
    Views
    277

    Re: Device Cloning

    If you click the try again it will normally download properly. Seems like the initial download attempt is blocked for some reason but I have always been able to hit retry and it has worked for me.
    ...
  2. Replies
    5
    Views
    380

    [Error Code] Re: MX-M904 ERROR L4-31

    I have had the same problem and it was caused by the PWB located at the exit side of the copier, some kind of short was causing the fuse to blow. Can't remember the name of the PWB but if you remove...
  3. Replies
    1
    Views
    155

    CLJ 4525 13.20 jam code no paper

    I'm surprised this is not in here somewhere LOL

    Customer has replaced several maintenance items recently. Currently getting a jam code of 13.20 with no paper in unit. Can clear the jam and it will...
  4. Replies
    14
    Views
    1,421

    Re: MX6070N blk pulling developer

    So everything looked good yesterday when I went back and there was no buildup on the drum as I showed earlier. All I did earlier in the week was a good cleaning of the rear of the unit and made sure...
  5. Replies
    14
    Views
    1,421

    Re: MX6070N blk pulling developer

    Thank you everyone for your responses. I am going back today with a lot of things to check! LOL Will let you know what I find

    Have a great day

    Bil
  6. Replies
    14
    Views
    1,421

    Re: MX6070N blk pulling developer

    I believe it is but we have swapped out so many developer units in the last couple of years I am not 100% sure. Cover is flush as far as I can tell snaps into place without having to be forced and...
  7. Replies
    14
    Views
    1,421

    Re: MX6070N blk pulling developer

    Yes, new drum and charge in each instance. Sawtooth corona I guess you would call it. It has occurred pretty much that same with both process units. Maybe we need to check to see if there is a...
  8. Re: MX-8090N 11x17 Image Prints offset 2mm on Long Edge

    Sounds like a registration issue. In adjustments there is a simulation in sim 50 that will allow you to calibrate each tray. I have had to do this on occasion, very quick and easy fix.

    Good luck...
  9. Replies
    14
    Views
    1,421

    MX6070N blk pulling developer

    I checked this post out. https://www.copytechnet.com/forums/sharp/154479-sharp-mx6070-f4-20-ee-el-issue-post1678624.html?154479=#post1678624

    Not quite the same as ours. We have a MX6070 that is...
  10. Replies
    3
    Views
    386

    [Misc] Re: Sharp MX-M365-565 charger grids dirty

    I use 250 grit or 400 grit emory cloth, don't use anything larger than 250 or it will damage the grid. Been doing it for years and it works great.

    Good luck

    Bil
  11. Replies
    5
    Views
    378

    Re: Mxm7570 keyboard wrong characters

    I have had this happen a few times. Reseat the connectors if you haven't already done so. If that doesn't work, then you can either replace the little board that is on the keyboard or replace the...
  12. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    Okay after a lot of hours and money. Swapping just about everything that can be swapped on the machine the culprit is? Don't know exactly but doing an end of lease format fixed the problem. We will...
  13. Replies
    6
    Views
    511

    Re: MX5070 toner motor replacement

    Give yourself plenty of time. This is a monster to replace. My boss just spent about 3 hours doing one in the field. Didn't get to see how he did it so that's about all I have. Had to remove at least...
  14. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    I have done this for the most part. Our best image is with text/photo as the exposure. We are supposed to swap it out with a loaner so I can work on it here at the shop but we shall see. Thank you...
  15. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    The actual error message is

    sampling data unfit

    #4 #5 #7 #8 #9 #10 #11 #12

    48055

    Finally able to upload a sample LOL
  16. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    Guess I was spelling CIT chart wrong. LOL Anyway it didn't work got an error message that the data sample was faulty both on the platen glass and through the DF with a list of number that were...
  17. Re: Aries 2 (40 series) and Mac 11.01 compatibility?

    Have not encountered an account code issue as long as you have the Sharp PPD. If the Mac uses their driver it doesn't have account code capabilities.

    Good luck

    Bil
  18. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    That would be one of the things I would try if the SIT chart doesn't work. Keeping my fingers crossed on that one LOL
  19. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    I thought about the line width adj but didn't mess with it. An option if the SIT chart doesn't work. Didn't try the LSU power since mono looks good but will give that a try. I'm willing to try...
  20. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    The initial one was 2Mb. I split them up so will have to see what the sizes are but pretty sure the mono one is less than 1Mb. We ordered the SIT chart so will see.
  21. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    Didn't run a sky shot, will have to try it to see what the difference is between mono and color.
  22. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    I'm not sure what the problem is. Tried several different browsers on 2 computers and it still will not upload the pdf. Tried changing the name still no joy. :(

    Talked to Sharp again yesterday and...
  23. Replies
    19
    Views
    1,421

    Re: MX5070N CQ issues when copying in color

    Sorry, forgot to mention internal prints are perfect. No issues with the print engine itself. Replaced black DV and drum just to try covering all of our bases but didn't think that had anything to do...
  24. Replies
    19
    Views
    1,421

    MX5070N CQ issues when copying in color

    Have an MX5070N that is not reproducing black text properly when in color mode fron the platen and through the document feeder. Single sided is worse than 2sided but they are both poor. Unit has a...
  25. Replies
    5
    Views
    870

    Re: MX3070 & MX3071 fusers

    Thank you for the flow chart and the suggestion. I did not see this anywhere on the US tech site. Gotta wonder sometimes

    Bil
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4