Search:

Type: Posts; User: byronf

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    289

    Re: Cyan lines showing up on prints

    Hi,
    Cyan drum unit.... clean the charge grid or simply replace.
  2. Replies
    12
    Views
    17,790

    Re: Bizhub C3110 CE pasword reset

    1. Touch Menu.
    2. Touch [Counter].
    3. Touch [Keypad].
    4. Press the following keys in this order.
    Stop -> 0 -> 9 -> 3 -> 1 -> 7
    (With this procedure, activate the access lock release timer to...
  3. Replies
    5
    Views
    465

    Re: Bizhub c250i squeaking noise

    Hi,

    This is common on this range, issue is the waste toner box screw just lubricate and sorted.
  4. [Misc] Re: C227 warming up only when ADF (DF-628) is connected.

    Hi,
    Been to the machine and the first thing I noticed the ADF is not operating. Checked all service mode setting and tested ADF PWB.

    It seems like there is and ICP that keeps blowing. I will test...
  5. [Misc] Re: C227 warming up only when ADF (DF-628) is connected.

    Hi Tb,
    I will back up the device and try the clear all data.
    Adf type was checked, unset and set.
    I am going to try emmc and eeproms, then proceed with wiring harness.
  6. [Misc] C227 warming up only when ADF (DF-628) is connected.

    Hi All,
    My tech has been back and forth to C227 that comes up with warming up only when the ADF is connect.
    He has tried all that is stated below:

    Change ADF
    changed power supply
    updated...
  7. Replies
    10
    Views
    792

    Re: C759 IU life not reset

    Details of Each Function-New Release Disable mode
    To enable a unit that is temporarily used for troubleshooting or other purposes to be used again as a new unit in another machine, New
    Release...
  8. Replies
    11
    Views
    763

    Re: V CARE CONNECTION

    Hi,

    You mentioned you installed a second hand EMMC, I
    Did you change the serial number as the EMMC will carry over the serial number from it original machine. Print a meter count page and confirm...
  9. [CQ] B554e 2nd (Duplex) side prints and copies black intermittently.

    Hi Guys,

    Please assist with the below:

    I have a B554e when doing double sided prints or copies it produces some black pages on the second side.

    Please see points below of what...
  10. [Misc] Re: KM C227 Vertical Lines when the print has coloured elements on the page

    I would suggest you upload the half tones (KYMC) at 255 and 120 to begin the trouble shooting.
  11. Replies
    13
    Views
    1,188

    Re: Konica Bizhub C558 Skewing & Jamming

    47309
  12. Replies
    13
    Views
    1,188

    Re: Konica Bizhub C558 Skewing & Jamming

    Hi All,

    I see a critical piece of this puzzle missing.

    When is comes to Jams I speak 1 language with my techs. No jam code I hung up as we are now shooting in the Dark.

    "WHAT IS THE JAM...
  13. Replies
    17
    Views
    4,361

    Re: Konica Minolta C3100p wrinkling paper

    Hi Guys,

    Is this wrinkle ( Dent / curl) on the trailing edge?

    Replace the highlighted below.

    47186
  14. Replies
    6
    Views
    2,019

    [Misc] Re: bizhub 215 226 163 211 admin password reset

    Have you tried Admsys
  15. Replies
    7
    Views
    532

    Re: C364e Complete optical unit replacement

    Ive changed few of these. You can also use the 4 series on the 8 series.
  16. Re: Konica Minolta c308 - stuck in self diagnostic mode

    Hi Kenny,

    You can stop the MFP to automaticly perform self diagnostics by adjusting dip sw 163 to hex 00.
    Lets us know
  17. Replies
    29
    Views
    1,500

    Re: Upside down on duplex

    Hi Guys,

    In the driver layout tab change binding position from auto to left bind and let us know.

    47074
  18. Replies
    9
    Views
    550

    Re: Consumable counter is incorrect

    These units are genuine and brand new. At first I assumed ENGINE DIPSW 3 (Disable New Release) was activated, I have confirmed that this is disabled.

    We now have another machine that did the same....
  19. Replies
    6
    Views
    386

    [Misc] Re: Copy color options missing C554e

    Hi Allan,

    Dipsw 71 - 00
  20. Replies
    9
    Views
    550

    Re: Consumable counter is incorrect

    Hi I have updated FW G00-W5 still have no luck with the state of consumable counter.

    Eariler this year I had another machine do this but I over looked it as we were heading for lock down. Now...
  21. Replies
    9
    Views
    550

    Consumable counter is incorrect

    Hi Gents,

    I have a few C759's that are reflecting incorrect life counters.

    We replaced imaging units and the counter did not reset to 100%.

    Is there a dipsw or something that I am missing...
  22. Replies
    10
    Views
    1,162

    [Misc] Re: B4052 / b4752 replace imaging unit message

    Unfortunately not..... Hobour terminals and storage.
  23. Replies
    10
    Views
    1,162

    [Misc] Re: B4052 / b4752 replace imaging unit message

    Hi,

    I must agree with you, however I am trying to take care of the pennys as I have to produce cost of sale stats on a monthly basis. I am just looking for room for improvement where possible.
  24. Replies
    10
    Views
    1,162

    [Misc] Re: B4052 / b4752 replace imaging unit message

    Hi Allan,

    Taking it a day at a time.


    The site has upgraded 80 of thier B4050's to the mentioned model. They print 10% coverage at max the B4050 dipsw work fine I got approximately 100000k per...
  25. Replies
    10
    Views
    1,162

    [Misc] B4052 / b4752 replace imaging unit message

    Hi All,

    I have a few B4052's, need to disable the replace imaging unit message.
    I have attempted DIPSW 51 Hex 20 and have had no luck.

    Is there any other dipsw that could assist me with this...
Results 1 to 25 of 79
Page 1 of 4 1 2 3 4