Search:

I don't know what you're talking about.
All I know is allan is respectable member of this community which some of you guys never ever would be.

That should cure it.

Best of luck with your new endeavours.
Come back at times experience is really appreciated.

bizhub C458 from Tray 2 Jam-code 12-01 (feed roller didn´t rotate)
Check one-way and shaft.

That is why I didn't hold a bit my opinion 😅
If it's a fellow tech that is another story for me.
You know all nasty staff they throw everyday at us...

+1. This machine looks like toasted. Maybe fixing it would cost a lot - drums, developer units, toner etc.

Replace SSD board.

Yes, red carded.

ICP9 on Paper feed/transport drive board.

Hey copyman Thank you for pointing my mistake I must have been thinking of bizhub 3320 in another thread and mixed my opinion. Sadly that happen when I sit so long there, must find another hobby...

Whether machine is 3320 or 3320i that procedure isn't applicable.

When nothing seems to work I always try as a last resort IE in compability mode.
But anyway that machine is outdated POS and I would advise customers to use it as copier till consumables run out and...

+1 on that although I don't have your vast experience with KM, never had even to thought about changing interlock switch on KonMin office machine.

Consider that your "lucky" day and move on :)

Sometimes it will require not only to remove jammed paper but to open certain covers ie. bridge/relay unit of course if machine has finisher and so on. Reboot will reinitialize machine and you are...

Check in System 2 that machine is set to display jam codes, on this model I believe they are not displayed by default (thanks KM). That said I think jam codes still should be recorded in MML like BC...

4k and you need to purchase CMY imaging units kit I guess it probably costs more than machine. Ouch...I feel your embarrassement. Maybe it's time to scrap that machine for a good reason.

Hi, doesn't have this kind of jam but you can review this old thread:
Konica c284 with finisher jam J72-22
Best of luck.

Maybe there is some setting for priority of quality instead of productivity(speed).

How :confused:

Halftones at 30,100, 200 and 255 please.
Looks like everything under 50% fill is coming white/blank. At that point I would initialize machine and start fresh doing adjustments.

Try new SSD board.

I don't offer any help here as we have almost zero clients using boxes but I feel Konica Minolta beeng so good in many areas sometimes fails miserably at very simple tasks. Box operator tool is...

I don't want them at all but they seem to easily infiltrate in this forum so if forum is closed for bots and such then hopefully there will be less spamming.
As per moderators we need a few from...

Boy, and you registered in copier techs forum just to post this :eek:
Another spammer. Get out.

Btw, I think new members must be allowed to post at the beginning only in welcome forum and copier...