Search:

Type: Posts; User: mrwho

Page 1 of 20 1 2 3 4

Search: Search took 0.35 seconds.

  1. Replies
    10
    Views
    223

    Re: Ricoh c751 error sc 685

    I never had that problem on that model before (I really don't have any of those machines under my umbrella, tbh), so I did a little research.

    And couldn't find anything besides what was already...
  2. Replies
    10
    Views
    223

    Re: Ricoh c751 error sc 685

    If the screen backlit is off and you can still see the screen error, then there's something else afoot - in older models we'd talk about the bicu and the laser motor (although it would be a different...
  3. Replies
    12
    Views
    188

    Re: Mpc4502a With single pass feeder sc700-00

    This looks silly, but it's actually a good advise imho.
  4. Replies
    12
    Views
    188

    Re: Mpc4502a With single pass feeder sc700-00

    Indeed - SC700 start at 01 (both on the manual and on my-ricoh). If the machine is indeed giving out that error, then I'd start asking questions - where did the customer remove that sticky residue...
  5. Replies
    12
    Views
    310

    Re: Ricoh letter size (A4) MFP

    The only gripe I have with the MPC305/306/307 is when you need to replace the toner supply coils - pain in the rear-end.

    Other than that, I really like them.
  6. Replies
    10
    Views
    223

    Re: Ricoh c751 error sc 685

    It's possible that the other PSU is also blown - hell, with a power outage, it's possible that any other electrical component is out of order.

    I'd start by double-checking all the PSU2 and relay...
  7. Thread: Mpc3001 sc531

    by mrwho
    Replies
    13
    Views
    281

    Re: Mpc3001 sc531

    531
    - Defective ventilation fan motor-front or rear
    - Defective IOB

    So, if you ruled out the fans, and checked the connections, the IOB is your next suspect - D0895123 PCB:IOB
  8. Replies
    10
    Views
    223

    Re: Ricoh c751 error sc 685

    SC685 C Power Supply Error 1
    PSU 2 failure.
    PSU 2 harness disconnected or broken
    PSU 2 defective
    Interlock relay board defective

    Most probably your Power Supply 2 is fried...

    You...
  9. Replies
    2
    Views
    95

    Re: Mp c3001 exhaust fan part

    +1

    You might also need the duct if it's broken, B2231326 and B2231327 - Here.
  10. Replies
    11
    Views
    249

    Re: MP C4503 Finisher error

    I know you said you tried with another finisher, but nevertheless check the feeler that sits between the sponge rollers, it might be stuck (in both finishers)
  11. Replies
    30
    Views
    3,095

    Re: Ricoh Aficio MP 6500 web motor

    I never turn away the chance of improving my english - so I welcome any input when I'm not clear about anything.
  12. Replies
    30
    Views
    3,095

    Re: Ricoh Aficio MP 6500 web motor

    I'm not a native english speaker, but I agree that we should all stick to a common language - if a solution is reached, it's best if everyone can benefit from it. And, since this is an english board,...
  13. [Misc] Connecting Media Identification Unit to a PC - Is it doable?

    Good evening lads and lasses!

    The title says it all - can I connect the MIU to a PC running some sort of software with the paper catalog? If so, where's said software? (Looked around My Ricoh and...
  14. Replies
    22
    Views
    511

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Forgetting the counters for a while, did you try to enter the serial number in SP/SSP/FactorySP modes?
  15. Replies
    8
    Views
    405

    Re: Ricoh MP C 8002 Clear company login

    Factory Mode
    SP5846-46

    (I think...)
  16. Thread: Tearing paper

    by mrwho
    Replies
    8
    Views
    404

    Re: Tearing paper

    +1
  17. Replies
    13
    Views
    424

    Re: Ricoh lube bar general question

    Tried it once, didn't go well. Fell apart like a crumbling sandcastle.
  18. Re: Those $#%@#% foam rollers on ricoh finishers.

    Rubber bands can work wonders in a pinch.
  19. Replies
    13
    Views
    495

    Re: MP 7001 slow print answer

    If it happens from all computers, it could also be a network problem - try lowering the machine network speed to 10mbps half-duplex. If it improves the print time (even though you lowered the speed)...
  20. Re: MPC 2800 showing restart when power on in the morning, before showing ready

    If it shows the restart screen, it means it must have logged an error code - you need to check the logging data (or print one with sp5990-04) to know what error is there before trying to fix the...
  21. Replies
    6
    Views
    481

    [Error Code] Re: Pro8300 with recurring SC471-05

    That's not an issue here, as the floor is cement (it's a warehouse).

    BUT I have a colleague (who gave me the hint of resetting the engine) who had trouble with a similar equipment installed over...
  22. Re: Ricoh Pro 7100x Printing Color on Black Paper

    So, how did it go?
  23. Replies
    3,672
    Views
    4,800,542

    Re: Just how Crazy is Donald Trump!

    "They have discovered the vaccine for AIDS"

    Fuck, how did I miss that??!?
  24. Replies
    80
    Views
    3,052

    Re: Moderator desperately needed!

    Yup - spammers and the occasional thread on the wrong forum.

    I believe even those rare "techs" who want frimwares and get offended if they don't get it deserve to be kept for archival purposes -...
  25. Replies
    6
    Views
    481

    [Error Code] Re: Pro8300 with recurring SC471-05

    That's one of the things I checked - when laying on the table, the frame stays still, doesn't wobble or anything. Also the machine worked perfectly since installation, without any major intervention...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4