Search:

Type: Posts; User: Leebs14

Page 1 of 14 1 2 3 4

Search: Search took 0.22 seconds.

  1. Replies
    1
    Views
    27

    [Misc] Kyocera M5526 & Secure print

    Hey all, I'm new to Kyocera kit so finding my way. A customer wants to have PIN number protected printing on their little M5526 machines they have. They want to be able to send print jobs to the...
  2. Replies
    5
    Views
    285

    Re: Status Message by E-mail Request Setup

    I use this function on all my sharps in the field, works very well, If you do set it up to receive meter readings then remember to set up for both schedule 1 and 2 and choose dates 3 days apart to...
  3. Thread: E7-11 error

    by Leebs14
    Replies
    7
    Views
    394

    Re: E7-11 error

    these models are not like thar, the scan unit is a whole unit and just to get the glass out is a full top end strip down, doc feed off and a whole host of covers and screws.thus machine has done 12K...
  4. Thread: E7-11 error

    by Leebs14
    Replies
    7
    Views
    394

    Re: E7-11 error

    [QUOTE=bilyahn;1473831]That is correct. Do a firmware update and a white reference adjust and see where that leads. I have a unit that just randomly throws one of these only when they scan, very...
  5. Thread: E7-11 error

    by Leebs14
    Replies
    7
    Views
    394

    E7-11 error

    I have a MXC300W showing a recurring E7-11 error intermittently, manual says CCD Fault, anyone agree or had this themselves?
  6. Replies
    12
    Views
    599

    [Error Code] Re: Kyocera M6530 paper empty when not

    Yes but i cant see its a broken gear as it wouldnt work when the paper tray is full of paper as then its heavier. when the tray is over half full it works fine, its only when the tray is nearly empty...
  7. Replies
    12
    Views
    599

    [Error Code] Re: Kyocera M6530 paper empty when not

    Thanks Luther, which assembly do you mean, see attached diagram from parts manual
  8. Replies
    12
    Views
    599

    [Error Code] Re: Kyocera M6530 paper empty when not

    why would the paper feed rollers make the machine show paper empty?
  9. Replies
    12
    Views
    599

    [Error Code] Re: Kyocera M6530 paper empty when not

    no i turned and checked the gears in the paper tray and they were ok
  10. Replies
    12
    Views
    599

    [Error Code] Kyocera M6530 paper empty when not

    I have a problem with a M6530, but the M6030 is the same machine. When it gets to elss than half full in the paper tray it shows paper empty and you have to refill the tray before it will work again....
  11. Replies
    5
    Views
    782

    [CQ] MXM264 grey prints

    I have a MXM264 which customer complained was printing light, what they meant were the black solids were not black but grey. So I fitted a new drum, charge and developer, set it all up, calibrated...
  12. Replies
    2
    Views
    499

    [Jamming] Bizhub C308 Internal finisher problem

    I went to a chargeable call out on one of these machines today which is not stapling pages correctly. What is actually happening is when it gets to 9 or 10 pages it starts to push the printed pages...
  13. Replies
    2
    Views
    561

    [Misc] Kyocera Cloning Data

    Hi all,

    How do I clone the information from a M5526 to another M5526?
  14. Replies
    3
    Views
    879

    [Misc] Scan from .........

    I have been to a pay as you go customer today who bought a machine at auction to set it up for them, all ok no problems apart from when they send a scan to email the recipient receives the email but...
  15. Replies
    3
    Views
    629

    [CQ] Re: MXC300W funny coloured or black line

    Hi OlliK1969 - thanks for your reply but i don't quite understand what you mean? do you mean look for broken hinge at back of the document feeder??
  16. Replies
    3
    Views
    629

    [CQ] MXC300W funny coloured or black line

    Hi everyone, I have reported to me a MXC300W which the customer says gives them a wavy black or dark purple line right down the edge of the copy when they use the document feeder or the glass to copy...
  17. Replies
    9
    Views
    2,153

    [CQ] Re: OKI B721 Blank prints?

    Hi guys, may thanks for your assistance, it was the LED head being knocked out of position it was facing the fuser. Flipped it back, refitted the springs and it worked perfectly.

    PhilB thanks for...
  18. Replies
    9
    Views
    2,153

    [CQ] Re: OKI B721 Blank prints?

    No I dont have a servoce manual
    They are using genuine OKI toners
    The printer has only done 41,000 prints so im guessing the drum is ok at that print count
    I am going there tomorrow to take a look
  19. Replies
    9
    Views
    2,153

    [CQ] OKI B721 Blank prints?

    I have been asked to look at a customers OKI B721 which they bought onlien about a year ago, I've never seen one of them before and the problem is that its printing blank prints. They say that even...
  20. Replies
    1
    Views
    274

    Ricoh SPC252SF - Hardware Error message

    Hi all, I have a Ricoh SPC252SF which Iím trying to set up wirelessly but when I set it up it seems to accept the settings ok but then doesnít work and when I check wireless settings and connection...
  21. Replies
    1
    Views
    595

    MX61 waste boxes

    Hi all, do you know whether I can use MX61 waste boxes in the older MX2630 machines which take the MX60 waste box?
  22. Replies
    4
    Views
    621

    [Error Code] MX2640 - E7-03 Error

    I have a recurring issue with e 2640 that it randomly throws a E7-03 code, the customer switches off/on and the machine is again fine for days/weeks before doing it again. Knowing there are issues...
  23. Replies
    1
    Views
    683

    [Misc] MX3060 User Codes and Airprint

    Hope someone can help with this?

    ive set up a MX3060 with user codes, just using the 5 digit user number to restrict unauthorised use, all very simple and all works fine until they come to use...
  24. Replies
    4
    Views
    626

    Kyocera M5521 & 5526?

    We are about to supply a huge number of these machines to a client and havenít really done much with these two models before but they fit the brief so we are going from 2 machines in the field to 166...
  25. Thread: Kyocera Toner

    by Leebs14
    Replies
    7
    Views
    1,500

    Re: Kyocera Toner

    Hi Anthony, not sure where you are based, here in the UK I use a generic toner from a company called THS from Germany, it works really well.
Results 1 to 25 of 335
Page 1 of 14 1 2 3 4