Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    3
    Views
    109

    Re: Sharp/Lexmark

    Do you have access to manuals? What models are you working on? =^..^=
  2. [Electrical] Re: FS-539, completely dead, or is it? Interesting experience today.

    Nice work, systematically moving towards the culprit. Dead shorts like this can be difficult to find, and occur anywhere in the machine.

    Your method is the quickest way there:
    Disconnect...
  3. Re: C3350 "Failed to Start, Turn Off and On"

    Congratulations on your success! =^..^=
  4. Replies
    5
    Views
    270

    Re: image issues

    Congratulations on your success. =^..^=
  5. Replies
    6
    Views
    387

    [Jamming] Re: Kyocera 2552 JAM 0501 & 0502

    Congratulations on your success! =^..^=
  6. Replies
    9
    Views
    514

    Re: P2040dw add paper to cassette

    I'll be interested in the results. =^..^=
  7. Re: C3350 "Failed to Start, Turn Off and On"

    Take a look at the error history in the service mode. There will be an error code.

    If you can, print the management list. It will also have the code.

    Also, in the service mode you can turn OFF...
  8. Replies
    1
    Views
    167

    Re: Harbor Freight Tool Boxes.

    Nice! =^..^=
  9. Replies
    3
    Views
    273

    Re: It shouldn't work....but it does

    Nope. Can't do it.

    On one new delivery we had 6 machines with finishers, some FS534, some FS536. The delivery guy saw 6 identical finishers and installed them randomly. Three worked and three...
  10. Replies
    5
    Views
    270

    Re: image issues

    Have you determined yet whether this is an ADF issue or a printer issue?

    Common on Toshiba document feeders: You can get a blur line ~50mm from the trailing edge of the original. Very difficult to...
  11. Replies
    12
    Views
    551

    Re: Konica 1050 touch screen problem!

    Keep going. I'm absorbing it all. =^..^=
  12. Replies
    12
    Views
    551

    Re: Konica 1050 touch screen problem!

    Thanks Mark!. This will be handy. =^..^=
  13. Replies
    7
    Views
    434

    Re: Bizhub 458e

    It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=
  14. Replies
    7
    Views
    434

    Re: Bizhub 458e

    That's it right there:

    Exit photointerrupter or flag
    Exit clutch.

    I've changed a lot of both. =^..^=
  15. Replies
    9
    Views
    514

    Re: P2040dw add paper to cassette

    Sounds like something I could fix with a flat file. =^..^=
  16. Re: Bad print only on black Konica Minolta C220

    What interval between voids?

    It looks like black developing to me.

    =^..^=
  17. Replies
    4
    Views
    200

    Re: Xerox Altalink B8065 DADF multifeeds

    Pad separation increases page separation with a stronger spring.
    Roller separation increases page separation with a WEAKER spring.

    Which do you have? =^..^=
  18. Replies
    4
    Views
    200

    Re: Xerox Altalink B8065 DADF multifeeds

    Is there a DF separation adjustment? If not, I have had success installing weaker (yes, WEAKER) separation springs to increase page separation. =^..^=
  19. Replies
    11
    Views
    569

    Re: p3145 fuser problems out of box

    I'm surprised, frankly.

    You complain about a heavy media not fusing, but will not attempt media type changes, or even figure out what media weight it is? A person with over 30 years experience...
  20. Replies
    5
    Views
    235

    Re: Hello world

    Welcome! =^..^=
  21. Re: BizHub7228 - Possible to turn on DCPS' Sub Power 24VDC via emulated control signa

    I created a "copier in a box" from a Sharp Tiger AR-M280.

    This particular model had spare DIMM sockets on the controller allowing the copying of the firmware DIMMs. So I scrapped the engine and...
  22. Re: BizHub7228 - Possible to turn on DCPS' Sub Power 24VDC via emulated control signa

    Yes, that's my question too.

    What symptoms? What are you trying to fix? You skipped over that part.
    =^..^=
  23. Replies
    11
    Views
    569

    Re: p3145 fuser problems out of box

    Start with my questions, please.
    =^..^=
  24. Re: Kyocera P7240 belt cleaning station noise

    I had this happen after installing Maint Kit A in a Gemini. The primary transfer cleaner was significantly more difficult to turn on the new part. After watching the belt jump (and scratching my head...
  25. Replies
    11
    Views
    753

    Re: TA 4012i Fuser Unit

    That doesn't look like enough characters for a Kyocera part number. Try throwing in an extra "V" ... 302V693040 Fuser FK7127

    =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4