Search:

Type: Posts; User: stani

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    In the past it was enough just to shorten 2 pins of the 4-pole key counter connector (5 Volt Counter Set) to tell the machine, the key counter is set. Now the presence of the counter is also checked...
  2. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Solved!

    I have the solution:
    it is not necessary to set anything in SP 5-113, only Key Counter Management in User Tools.
    The main thing: you must first attach the coil of the counter to Pins 3 and 4, than...
  3. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    sure, double count is activated and internal counter counts twice on large format. The only problem is - on the 20 pole output of counter interface board large format is signalized not by 2 count...
  4. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    I have tried it on different machines of the same type, so I dont think there is a board problem.
    M12 works as it schould, the only problem, it provides no doublecount for large format.
    Thank you...
  5. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    The connector on CN133 shortens pins 1 and 4 (I think it is just a loop to pull the wrong insert Protection Cover)
    49089
    CN 133 Measured:
    Pin1 Ground
    Pin2 5 V
    Pin3 24 V
    Pin4 2,5-3 V on...
  6. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    I also thought so, and tried both solutions you offer. I have found in the documentation, that the 4 pole connector is to be used with sp5113-001 0, 11 oder 12, but I dont manage to use the 5 V line...
  7. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    There are 3 Settings in User Tools:
    Key Counter Management (always editable)
    External Charge Unit Management (only editable with SP5-113-001 not 0)
    Enhanced External Charge Management (only...
  8. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    Re: key counter

    I think I have tried all the 3 options in 5113-002 with no success, but I ll try it once more, maybe I didnt try all the possible user tools settings with it.
    Unfortunately, I cannot ask the...
  9. Replies
    11
    Views
    1,383

    Re: ricoh 3352 external devices questions !!

    OK, done
  10. Thread: key counter

    by stani
    Replies
    14
    Views
    1,451

    key counter

    I have installed for a copy shop a self-build counting system and it worked fine with elder machines. But I didnt find how to unlock the MP 3054 after setting External charge unit management. I have...
  11. Replies
    11
    Views
    1,383

    Re: ricoh 3352 external devices questions !!

    Did you find a solution? I have the same Problem with an MP 3054. I have installed for a copy shop a self-build counting system and it worked fine with elder machines. Like the topicstarter I didnt...
  12. Re: Martini C1 Aficio 1075: background only on a part of the 1st copy

    Many thanks, it was the not genuine drum
  13. Re: Martini C1 Aficio 1075: background only on a part of the 1st copy

    Actual drum is not original ricoh, I will replace it once more with original one. Drum meter reading about 25000 pages. Scanner section cannot be the reason for the fault as the error is on the...
  14. Re: Help wanted - only printing both l/h & r/h edge of photos on a ricoh MPC306

    The solution of sandmanmac works! I have installed this out-of-band update today on 3 Windows 10 PC with the same printing problem. Windows 10 Version 2004 und 20H2, works on both versions.
  15. Martini C1 Aficio 1075: background only on a part of the 1st copy

    the first 5cm/2 inches of the first copy/print have dark background, next pages are ok. The best way to see the problem - to print out copy counter. If you wait about 5 minutes, the first print after...
  16. Replies
    11
    Views
    1,317

    Re: MP C3500 jamming under/before the fuser

    did you checked the condition of the transfer case as Oze propozed? It was very oft on MPC4000 machines. There are about 3 or 4 parts that had to be replaced as a set to solve it. I also had some...
  17. Replies
    162
    Views
    95,466

    Re: RICOH copeir monthly auto meter

    Iīd like to get a copy too:
    zhnbgt@yandex.ru
  18. Replies
    19
    Views
    1,124

    Re: MP3350 died when I replaced the drum and blade

    you can try accessing the machine thru web-interface, maybe you can see the error-code
  19. Thread: Ricoh MP 6001

    by stani
    Replies
    16
    Views
    1,622

    Re: Ricoh MP 6001

    If you (topic-starter) mean the 1. Tray,
    I had the same issue - actually it was nothing really wrong with the machine. All I had to do is to take all the paper from both trays, insert the empty...
  20. Replies
    9
    Views
    1,112

    Re: PCU type 1027 Cleaning entrance seal

    I mean the mylar beneath the cleaning blade.
    to Pulsara Katun donīt sell it anymore, the only vendor I found is aliexpress with somethung like this:
    20XEntrance Seal for Ricoh Aficio AF 1075 1060...
  21. Thread: mpc2500 sc553

    by stani
    Replies
    14
    Views
    3,435

    Re: mpc2500 sc553

    I had some mashines, where I replaced only the belt and got this error. I could solve this error without changing the whole fuser unit. Changing the orange foam roller AE010054 and the gear with...
  22. Replies
    9
    Views
    1,112

    PCU type 1027 Cleaning entrance seal

    Does anybody know the Parts Number or a vendor for this mylar? Or any other way to replace it? Sometimes is this mylar is bent so much, the toner could spill or clog. I didnīt find the number also in...
  23. Canon CLC Paper Deck E1 mountig hardware part number missed in the catlogue

    Partsnumber for mounting hardware of the Paperdeck for CLC 11XX needed - in the catalogue is no number for it, see attached pdf. Does anybody have the updated version of the catalogue?
    I have...
  24. Replies
    3
    Views
    640

    Re: MP C5000 unsufficient Fusing

    it is not the wear issue, all of the 5 MPC5000s I have, have the same problem (it is not a fault, it is a feature:))
  25. Replies
    3
    Views
    640

    MP C5000 unsufficient Fusing

    When 100g/cm3 (3,6 lbs/in3)paper is used, the fusing is unsufficient at least on the first copies after wake-up. Setting higher temperature and fuser idling before job did not solve the problem...
Results 1 to 25 of 31
Page 1 of 2 1 2