Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    11
    Views
    411

    Re: Automatic reset bizhub 4050

    No not necessarily.
  2. Replies
    10
    Views
    368

    Re: Black build up in drum keeps coming back

    Build up on developer roller?
  3. Replies
    8
    Views
    346

    Re: no more "heavy duty" km office engines

    Its a pity, Found the 958 to be a beast. Melts its sensor holders but other than that not a bad thing to say.
    Paper dust is its only real enemy.
  4. Replies
    1
    Views
    160

    Re: Bizhub C3851FS error C3201

    Its a rank B error and will reset by opening and closing the front door or cycling the power.
    The fuser motor reports a locked state. Means its not turning.
    So the fuser is jamed on installed...
  5. Replies
    11
    Views
    411

    Re: Automatic reset bizhub 4050

    Leave a door open and check if is works for more than 15min.
    Check the history for error codes even if it does not display it could still be logged if its a controller error.
    Do you hear the relays...
  6. Re: Bizhub C308 Power Supply Humming Noise - Fuser

    The manual contains schematics point to point wiring. Konica Minolta does not publish the diagrams thru there channels. Been repairing boards here and there. Been struggling with the power boars the...
  7. Re: need help,how to solve white line on paper kycera km2050.

    A3 machine? Guess the copy is SEF landscape.
    Had one of theses on the first call 2 years later the machine was on 300K and the complaint was light copies.
    Cleaned the optics and all the rest,...
  8. Re: Bizhub C308 Power Supply Humming Noise - Fuser

    Florescent lights?
  9. Re: Bizhub C308 Power Supply Humming Noise - Fuser

    47443

    Ok so not modes but phase control levels.
    Bad image but look for it in the manual.
    Describes the issue you have, its noise thrown back from the phase control that can be changed.
    Depends...
  10. Re: Bizhub C308 Power Supply Humming Noise - Fuser

    Try changing the fuser temp control mode in service. Think there are like 4 different modes.
  11. Replies
    43
    Views
    1,186

    Re: Anyone into Cryto currency?

    Well phrased.
    Problem i have with the Kruger rand is its difficult to make change...

    Already stockpiled dry goods and other toys on an off grid farm for the occasion.
    Special place for when...
  12. Replies
    1
    Views
    150

    Re: I'm embarrassed for women everywhere

    I feel the bullshit. Our rugby has been plagued with politics and now the plandemics. Despite all the resistance it took Rassie Erasmus on coaching to get the act together and win the 2019 world cup...
  13. Replies
    43
    Views
    1,186

    Re: Anyone into Cryto currency?

    South-Africa. Johannesburg is built on top of gold rich earth. Illegal groups called Zama Zamas dig new shafts underneath the highways in the city to make some black market money.

    Can always over...
  14. Replies
    43
    Views
    1,186

    Re: Anyone into Cryto currency?

    Ripple seems to be the poison of choice for the new money interchange.
    Only got like $300 worth of XRP, things are real tight this year.
  15. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    No problems changing between 512 and 514. CMKY all contains developer.
    Think here you only need to change the tops over.
  16. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    See in this case it will work if its a color machine but no developer in the C654 toners so the developer will get depleted short of the yield.
    The K toner is the same and will work no problem.
  17. Replies
    43
    Views
    1,186

    Re: Anyone into Crypto currency?

    The reason I got into bitcoin was motivated by the weakening South-African Rand. The economy is taking the same route as Zimbabwe, farmers are about to loose there land, something the ANC government...
  18. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    For the sake of not wasting it use it.
    It will work just fine on your machine.

    Not all copier toner are the same its quite a complicated topic.
    Mixing toners mess up machines.
  19. Replies
    43
    Views
    1,186

    Re: Anyone into Cryto currency?

    Very true. One of the steps heading into this new world we are following into like sheep could be to control our ability to connect to the internet without a hardware devise to authentic you.
    ...
  20. Replies
    1
    Views
    530

    Re: is this right? (trivial)

    Looks about right. Shorting it like that will cause a massive voltage drop and the power out put will be lower a higher amperage.

    Not taking resistance into account.
    5V X 100A is only about...
  21. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    Don't do this blindly i check the material safety information sheets on the toners.
    Contains all the CAS numbers and quantity in the mix.

    Will be supersized to find that they are identical...
  22. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    Hey if OP is a end-user and screws up. Means money for a tech out there...:cool:

    Agree sell you toner on the old interweb then buy the right stuff if you don't want to take risks.
    Easy sell.
  23. Replies
    7
    Views
    335

    Re: Fuzzy Prints / White Spots on Black only

    Make sure there are no tweaks applied.
    Go to image process adjustment and make sure all the settings there are set to default.
    Like the TCR values, image background adjust, transfer voltage and...
  24. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    Works no problem. Same toner...

    If the machine replenish developer you will see a port from the devtank going into the waste box.
    In that case for K TN216/319 TN321/512 TN514 TN613/712 all the...
  25. Replies
    43
    Views
    1,186

    Re: Anyone into Cryto currency?

    True but you can sell for fiat money. Tax man should have a bit of an issue with this...
    Thanks for the channel recommendation will check it out.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4