Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    152

    Re: sp8400 maintenance A

    Yes same series if you need manuals add thread in service manuals required I will send
  2. Replies
    10
    Views
    564

    Re: MP C407 print by phone user not allowed

    Thats just for apple
  3. Replies
    5
    Views
    240

    Re: RICOH MPC8003 magenta background

    You can get a build up of toner on the dev assy make sure you clean all sensors these machines need a lot of servicing.
  4. Replies
    48
    Views
    1,895

    [Misc] Re: SMTP Authentication causes error

    Ricoh this week have done loads of package firmware updates on octopus
  5. Replies
    48
    Views
    1,895

    [Misc] Re: SMTP Authentication causes error

    SSL needs to be on and it's port 465

    Also check less secure app as Google turns off if not used within a week also check inbox if any security messages
  6. Replies
    9
    Views
    486

    [Error Code] Re: Aficio MP C305 SF Error J017

    Could be guide missing from inside machine or paper lift plate check rear of cassette. Or damage paper make sure paper is flat. Would be good to see picture of where inside side door
  7. Replies
    9
    Views
    678

    [Jamming] Re: Toner build up on transfer belt

    The problem is with the magenta dev assy and or pcu was the one you fitted used and if new did you setup correctly.
  8. Replies
    5
    Views
    178

    Re: Hi from NEW ZEALAND

    Hello
  9. Thread: ex xeroid

    by mga
    Replies
    4
    Views
    125

    Re: ex xeroid

    Hello
  10. [Error Code] Re: Canon ImageRunner Advance C9280 Pro | "Fixing Feed Drawer Connection Error"

    I think you should call Canon have you also noticed the control panel isn't showing the finisher it could be related good luck
  11. Thread: MPC 5503..

    by mga
    Replies
    7
    Views
    269

    Re: MPC 5503..

    For this model all RTB'S are on octopus look on knowledge icon if it's catching on a guide its probably damaged also check the guide and gear assembly on right door
  12. Replies
    9
    Views
    678

    [Jamming] Re: Toner build up on transfer belt

    It would more likely be related to the magenta developer assy & or pcu what's there pm life is the paper transfer roller also coated
  13. Re: LD540c Put new toner in and it says toner empty replace toner

    Replace toner pump
  14. Re: No Toner in devloping assembly canon ir advance 8205

    You will need to replace the broken rods
  15. Thread: mp5055 bad quaity

    by mga
    Replies
    5
    Views
    327

    Re: mp5055 bad quaity

    +1
  16. Replies
    8
    Views
    324

    Re: IM4000 fax install, but no icon shows up

    +1 it's a school day everyday
  17. Replies
    9
    Views
    432

    Re: Ricoh MP C3504 Nameplate

    Hope this helps
  18. Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

    ? If you have replaced the pcu and the developer unit that is a pcdu.
    Going back did you return the transfer itb contact lever above the bk pcdu
  19. [Error Code] Re: Canon ImageRunner Advance C9280 Pro | "Fixing Feed Drawer Connection Error"

    Being a end user you may be best to call a credited service engineer.
    You can pull the draw out more look on the rail push the two leaf springs in may help to see more
  20. Re: IRA-C5240 Black printing light Developer unit problem?

    You don't have starter on this machine it's a complete dev assy.
    If you have a faulty dev assy with bad TD settings if you replace with used dev assy it will use the same readings for TD sensor you...
  21. Replies
    2
    Views
    162

    Re: Toshiba Parts Manual

    Pm sent think this is it under kd 1059 on tosh there's no parts list but the service manual is the same for the kd 1031 so I've sent that part manual
  22. Re: IRA-C5240 Black printing light Developer unit problem?

    What's the life on the dev assy if was other dev assy done the same thing straight away its properly the plastic drive coupling. When swapping over dev units you need to iniset
  23. Replies
    5
    Views
    331

    Re: C4502 jammed in c , no paper anywhere

    +1 and do the call 1st there may not be a problem could be user
  24. Replies
    9
    Views
    432

    Re: Ricoh MP C3504 Nameplate

    Its in the parts manual under accessories
  25. Replies
    8
    Views
    447

    Re: Metis sleeve assy.d150-4042 for small model? [solved]

    Yes it works ok on mpc2003 2503 3003 3503 4503 5503 6003
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4