Search:

Type: Posts; User: Simza

Search: Search took 0.11 seconds.

  1. Re: Bizhub 363 is not booting, only hourglass continue

    Hi,
    thank you very much for your support,
    i have clear the problem with recovery tool.
    1-Copy NVRAM on MFP-Board(Working copier)
    2-take the NVRAM out and put in the dead copier. Started it with...
  2. Thread: mp201

    by Simza
    Replies
    21
    Views
    2,246

    [Error Code] Re: mp201

    Hi,
    i arrange the same model(mp201) replace the polygonemtor, the board above the polygonemotor.
    At last i have change the MFP-board.
    After them the code was gone.
    I have try 100 copies. No code...
  3. Thread: mp201

    by Simza
    Replies
    21
    Views
    2,246

    [Error Code] Re: mp201

    Thanks a lot,
    i have alredy fix the problem:cool:
  4. Thread: mp201

    by Simza
    Replies
    21
    Views
    2,246

    [Error Code] Re: mp201, Error 320

    Hi,
    i have understand your massage, please ignore may massage if you are here to hurt people, because i am here to discuss my problems about my work.
    For me it dosent metter who the guy is. He is...
  5. [Misc] Re: Develop Ineo+ 224 - Invalid External Memory while updating Firmware

    Hi Friend,
    i have face this problem also manytime,
    you have to check.
    -formatting the USB (FAT32)
    -make shure that you have e-version data or normal 4serial FW-data
    -Dont use Kingstone....USB....
  6. Thread: mp201

    by Simza
    Replies
    21
    Views
    2,246

    [Error Code] Re: mp201, Error 320

    Hi Friends,
    i have SC320 in Aficio 201. I have replace the polygone motor und the power circut abouve the polygonemotor with outher used parts(which i have tested before install), but the code is...
  7. Re: Bizhub 363 is not booting, only hourglass continue

    Hi Fiends,
    i am used copiers dealer in Germany since 2002.
    We are not working with Konica-Minolta, ricoh...... directly as a technican.
    We buy copiers in big quantity, check, make testcopy and...
  8. Re: Bizhub 363 is not booting, only hourglass continue

    Hi,
    can anybody provide me Reset tool for Minolta Bizhub 363.

    Thanks,
    Stay Safe
  9. [Misc] Re: KONICA C454e CE PASSWORD RESET TO DEFAULT WITHOUT CHANGING THE SSD

    Butttt Synthohol have the right way:cool:
  10. [Misc] Re: KONICA C454e CE PASSWORD RESET TO DEFAULT WITHOUT CHANGING THE SSD

    Hi,
    i have solve the same problem before few days with reset tool.
    All outher solutions was not working.
    Outherwise maybe it will gone to neverending story.

    Stay safe
  11. Re: Bizhub 363 is not booting, only hourglass continue

    Hi Friend,
    thank you for reply.
    I have try many time to install the firmware again, but it shows only hourglass.
    I have also try to change the NVRAM with outher copier (BIZHUB 363), but the...
  12. Bizhub 363 is not booting, only hourglass continue

    Hi comunity
    i have problem with bizhub 363, which i have created myself. I have updated the firmware and the elctrecity was gone. Because somebody have take the power switch off.
    So now i try to...
  13. Replies
    13
    Views
    2,062

    Re: Bizhub 363 keeps restarting

    Thank you, i will do it currently.
  14. Replies
    13
    Views
    2,062

    Re: Bizhub 363 shows only the hourglass

    Hi comunity
    i have problem with bizhub 363, which i have created myself. I have updated the firmware and the elctrecity was gone. Because somebody have take the power switch off.
    So now i try to...
Results 1 to 14 of 14