Search:

Type: Posts; User: austonrush

Page 1 of 8 1 2 3 4

Search: Search took 0.19 seconds; generated 53 minute(s) ago.

  1. Re: LJ M506 stuck on supply memory error 10.00.01

    Glad it worked for you. Yeah I wouldn't risk putting the other toner back in either!
  2. Replies
    5
    Views
    1,841

    Re: NX-4110 scanning Checks

    I can confirm on the newer MX4071 that scanning in Mono resolves the issue!
  3. Replies
    2
    Views
    867

    [Jamming] Re: HP M806 13.E1.D2

    Sensors tested fine so I'm going to replace the face down delivery assembly. I'll let you guys know how it goes.
  4. Replies
    2
    Views
    867

    [Jamming] HP M806 13.E1.D2

    Hey Guys,

    Have any of you run into a fairly consistent 13.E1.D2 error on a M806 or M830, also known as the 13.E1.Dz? The fuser has been changed by the customer which did not help.

    I'll be...
  5. Replies
    4
    Views
    499

    [Error Code] Re: MXFN11 Finisher not detecting Staples

    Thanks for the help guys. I can confirm it was the little black tab on the staple cartridge that had broken off. Thanks for the tip! Missed it the first time I was in, it is very small, so not really...
  6. Replies
    4
    Views
    499

    [Error Code] Re: MXFN11 Finisher not detecting Staples

    I have another cartridge here. I'll take that over and try it first. thanks!
  7. Replies
    2
    Views
    546

    Re: scan to google drive

    You cannot scan directly into google drive from this model, however saying that, you can work around this by scanning to specific windows folders that are being synced to google drive :)....
  8. Replies
    4
    Views
    499

    [Error Code] MXFN11 Finisher not detecting Staples

    Hi Everyone,

    Have any of you had the issue where the MXFN11 Finisher does not detect new staples being installed. The manual says the sensor that detects the presence of staples is FSD and it is...
  9. Re: LJ M506 stuck on supply memory error 10.00.01

    I'm trying to order a DC control board next but, having issues finding one in stock. Still not resolved :( the printer is sadly just hanging out on a work bench.
  10. Re: LJ M506 stuck on supply memory error 10.00.01

    I've tried a HP OEM toner. Another brand new one is in there now.. I also went to manage supplies/ cartridge policy and tried with it both on and off, no difference. POS, gotta be the board.

    Just...
  11. Re: LJ M506 stuck on supply memory error 10.00.01

    I've tried a HP OEM toner...
  12. Replies
    22
    Views
    3,403

    Re: HP M525 Close top feeder cover

    We re-solder these cables all the time. They break from frequent opening and closing of the cover.
  13. Replies
    8
    Views
    799

    Re: HP Color LJ 3600 faint blacks

    Definitely looks like the high voltage board.
  14. Re: LJ M506 stuck on supply memory error 10.00.01

    Hi Guys,

    I have the same problem with a HP M527 (built on the M506 printer), I've replaced the chip reader and hvps that it plugs directly into with no luck. It still boots with a supply memory...
  15. Re: Sharp mx-3140 locks up after exiting simulations

    I'd update the firmware, may be the beginning of an SD card failure.
  16. Replies
    7
    Views
    1,180

    Re: Hp M604 faded prints.

    If the transfer roller and toner do not fix the problem then it almost certainly be the HVPS.

    Did you use an OEM transfer roller ? You could also swap the transfer roller and toner (as a set) from...
  17. [CQ] Re: Hp color laserjet 5550n, multi color horizontal lines on 11 x 17 ...

    Most Likely Causes (99% of the time)

    Option 1) bad toner cartridges
    Option 2) HVPS
  18. Replies
    10
    Views
    1,074

    Re: MX-M453 skewing from drawers

    I've done this as well, it is a bit retro but, literally lasts forever! :)
  19. Replies
    4
    Views
    1,763

    Re: sharp mx 5070n keeps rebooting...

    I'd replace the SATA Card with a new one and re-image it. The ones used by sharp fail all the time.

    Good Luck
  20. Replies
    0
    Views
    426

    Engine Name Change and Update

    Hello Fellow Sharp Techs,

    Please see attached announcement, Sharp has softly and quietly relaunched the MX3070N/ 35070N/ MX4070N/ 5070N/ 6070N They will now be called and ordered as MX3070V/...
  21. Thread: Dropbox

    by austonrush
    Replies
    3
    Views
    785

    Re: Dropbox

    I should have mentioned you can scan to a local folder on a PC that is synced to dropbox. This is the free way to get scans to dropbox :)
  22. Thread: Dropbox

    by austonrush
    Replies
    3
    Views
    785

    Re: Dropbox

    UDOCX will work, it isn't free though. It is very versatile!

    http://udocx.com/sharp/
  23. Thread: F1-21

    by austonrush
    Replies
    10
    Views
    3,311

    [Error Code] Re: F1-21

    F1-21 Finisher fan trouble



    Section
    PCU
  24. Replies
    10
    Views
    1,666

    Re: Weird Bypass Tray print issue - MX-3070N

    Possible paper size sensor issue? That is super strange.... Maybe moving it helped a sticky sensor (grasping at straws), lol

    I've had this exact issue with an HP printer this year and it was the...
  25. Replies
    15
    Views
    24,447

    [Error Code] Re: error code C4-02

    You've been told multiple times to replace the PTC unit. You can buy it on its own or you can buy the Primary Transfer Belt rebuild kit, which includes it. If you clear the code via the instructions...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4