Search:

Type: Posts; User: cpress

Page 1 of 2 1 2

Search: Search took 0.03 seconds.

  1. Thread: Xant Ilumina

    by cpress
    Replies
    0
    Views
    187

    Xant Ilumina

    Searched online for a service manual for this machine with no luck. Any suggestions on where to look
    TIA,
    David
  2. Replies
    1
    Views
    276

    Ricoh 7100 Skilled operator settings

    Hello,
    I changed the pcu cleaning unit and need to log in to the skilled operator to reset the counter. I type admin for the user name and nothing for the password and that doesn't work. Is there...
  3. Replies
    0
    Views
    377

    Xerox C75 094-322

    Keeps throwing this code,There was a new 2nd BTR installed a couple weeks ago. It does make a small grinding sound when starting up. The gears on the bar unit look good. Drive motor gears bad...
  4. Replies
    2
    Views
    568

    Fiery EX C75 Rip

    Hello,
    My rip all of a sudden says "video card not installed" when I send a job to the C75. Is the video card bad? A guy tells me a "surge" from the C75 caused the issue. Can I just replace the...
  5. Re: Xerx C75, 078-261 fault code for high capacity tray

    Thatís exactly what it was, I made a bushing and it works great now!
  6. Xerx C75, 078-261 fault code for high capacity tray

    My High capacity tray doesn't register , has a 078-261 code. I can't find anything in my service manual with this code. HELP!!!
    The tray will lift but nothing else. Any Ideas?
  7. Replies
    2
    Views
    382

    Xerox C75 Excessive Toner

    Hello,
    My C75 seems to be using a lot of Black toner. Even on light coverage its using a cartridge up fast! Way more than it has in the past. Any ideas as to what I can look at to correct this?...
  8. Replies
    0
    Views
    604

    Xante Ilumina DEP Fatal Error 00026e34

    Anyone know what this is? I can't find anything. Or do you know where I can download a service manual
  9. Thread: Xerox C75

    by cpress
    Replies
    6
    Views
    870

    Re: Xerox C75

    Put a new one in, cleaned the pad also
  10. Thread: Xerox C75

    by cpress
    Replies
    6
    Views
    870

    Re: Xerox C75

    Itís showing the 061-319 code also....
  11. Thread: Xerox C75

    by cpress
    Replies
    6
    Views
    870

    Xerox C75

    Continuing saga again 061-340 code, replaced c,k ros unit same thing again. Flat cables maybe? Interlock switch seems to be ok.
  12. Replies
    9
    Views
    956

    Re: Fee Flow Rip C75 Error

    Yes, still the same issue
  13. Replies
    9
    Views
    956

    Re: Fee Flow Rip C75 Error

    Xerox tech was in and replaced the board and the cable, neither fixed the problem. I thought I read something about the system Bios battery need to be replaced. Xerox wonít send specialist because we...
  14. Replies
    10
    Views
    1,809

    Re: Print direct from pc to C75

    This is my unit, the free flow is disconnected at the moment
  15. Replies
    10
    Views
    1,809

    Print direct from pc to C75

    Which driver do I install to print directly to the c75?
    the printer cane with a free flow but we are having issues with it right now and I just want to print from a pc to the printer.
    i downloaded...
  16. Replies
    9
    Views
    956

    Re: Fee Flow Rip C75 Error

    System back up or config back up
  17. Replies
    9
    Views
    956

    Re: Fee Flow Rip C75 Error

    When both the rip and printer are turned on the communicate, when you send job to print it throws the code. Thought about reinstall of software?
  18. Replies
    9
    Views
    956

    Fee Flow Rip C75 Error

    Hello,
    Getting an error when we go to print from the rip P03-201 on the rip and a 127-212 on the printer.
    We have checked all connections, they are fine, even tried a new cable with same result....
  19. Replies
    14
    Views
    3,069

    Re: C75 won't duplex

    After further testing entering 077-115 in the component control I get the High Reading, them inserting a piece of paper and reentering the the 077-115 I don't get the low reading. It is a new...
  20. Replies
    14
    Views
    3,069

    Re: C75 won't duplex

    After doing all the above steps, even replacing the duplex motor. It says to replace the PH Drive PWB. Anyone done this? It seems like a task that's not too difficult. Any tips or suggestions?
    Thanks
  21. Replies
    1
    Views
    677

    Re: Xerox C75 Free Flow C16-352 Error

    Disregard the post! I found the problem cables were plugged in the wrong port! Phew!
    Thanks
  22. Replies
    1
    Views
    677

    Xerox C75 Free Flow C16-352 Error

    My Free flow rip is throwing this code. We have double and triple checked all the connections, what am I missing?
    We had to install a duplex motor on the C75 put it back together printed a sheet and...
  23. Replies
    3
    Views
    903

    [Error Code] Re: Xerox C75 071-104, 106. 078-103,103, Etc

    Print or copy it didn't make a difference, sensors are clean, paper sizes and all that are correct.
    It was working fine then it just quit working all at once.
    David
  24. Replies
    3
    Views
    903

    [Error Code] Xerox C75 071-104, 106. 078-103,103, Etc

    Machine keeps throwing pre registration sensor codes. Will only feed from large capacity feeder (tray6) and bypass tray (tray5) and won't duplex as they all jam in the same spot.Do I have to replace...
  25. Replies
    14
    Views
    3,069

    Re: C75 won't duplex

    [QUOTE=Phil B.;899999]check the error log... it should mention the jam code.

    sensors could be bad or whacked.. you would have to check sensors in service mode.

    have you cleaned the duplex...
Results 1 to 25 of 34
Page 1 of 2 1 2