Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.19 seconds.

  1. Replies
    13
    Views
    323

    Re: Ricoh 2550 Print Not Clear

    I can only see one back ground colour with is magenta also the ptr roller would be colour because the magenta is placing to mush toner on the belt with is going on to the ptr very common problem but...
  2. Replies
    4
    Views
    120

    Re: Ricoh MP 9003 parts & Service manual needed

    Done everything you will need
  3. Replies
    4
    Views
    120

    Re: Ricoh MP 9003 parts & Service manual needed

    I will pm you with link
  4. Replies
    7
    Views
    290

    Re: Ricoh Mp4001 - Is this machine good?

    In my eyes the mp4000/5000/1/2 series are not very good they don't use that design no more with says it all the models below ie Russian are one of the best 20 to 30 page per minute and the range...
  5. Replies
    13
    Views
    323

    Re: Ricoh 2550 Print Not Clear

    You will need to replace pcu and dev assy most probably
  6. Replies
    2
    Views
    131

    [Dead] Re: sharp mx2640n please wait

    Firmware is loaded on with usb stick where are you getting firmware from sharp
  7. Thread: Ricoh MP C5503

    by mga
    Replies
    9
    Views
    260

    Re: Ricoh MP C5503

    Check parts life did you see Id sensors pushing shutter out the way 370 03 will be the rear sensor
  8. Replies
    45
    Views
    1,401

    Re: Looking at selling Konica Minolta.

    For me ricoh all day long great support backup in the uk long life parts if oem used 2nd place is Canon 3rd Kyocera 4th Konica & sharp
  9. Replies
    6
    Views
    142

    Re: ir adv c7260 color registration issues

    Correct
  10. Replies
    6
    Views
    142

    Re: ir adv c7260 color registration issues

    How the pm parts life ie drums & devs if one is a little feint the id sensors can't read the patch correctly from itb I take it you have fully serviced machine. Did you set up new id sensor
  11. Replies
    15
    Views
    444

    Re: pliers for c2800 fusing gear circlips

    Perfect that's the ones I use works on all machines including mp9003 and mpc6503 you do need the one that open to a inch
  12. Replies
    12
    Views
    319

    Re: Mp4054 random duplex jams

    +1 see if starts to roll on single side
  13. Replies
    12
    Views
    319

    Re: Mp4054 random duplex jams

    No clutch in duplex
  14. Thread: Ricoh MP C5503

    by mga
    Replies
    9
    Views
    260

    Re: Ricoh MP C5503

    +1
  15. Thread: Hii

    by mga
    Replies
    5
    Views
    109

    Re: Hii

    Hello
  16. Re: How to reset Password on web image monitor? machine MPc2550

    [QUOTE=Tahir Abbas;1569181]

    The only way to reset the admin password is though supervisor or factory service mode old thread
  17. Thread: Firmware

    by mga
    Replies
    11
    Views
    405

    Re: Firmware

    Call them in to update
  18. Replies
    8
    Views
    5,509

    [Error Code] Re: Ricoh MP-C2500 SC-681

    Here's some information
  19. Replies
    8
    Views
    5,509

    [Error Code] Re: Ricoh MP-C2500 SC-681

    You can't turn it off if faulty you need to replace
  20. Thread: Ricoh Mp c6502

    by mga
    Replies
    18
    Views
    619

    [Misc] Re: Ricoh Mp c6502

    Stop swapping parts from other machines if not set up the copy quality will go bad just like the 1st time
  21. Thread: New to the forums

    by mga
    Replies
    9
    Views
    211

    Re: New to the forums

    Hello welcome to CTN
  22. Replies
    6
    Views
    213

    Re: Hi everyone here~

    Wellcome new user
  23. Replies
    4
    Views
    168

    [Error Code] Re: "Please Wait. Checking Printer..." HPCLJM575

    I didn't think the hdd came with formatter
  24. Replies
    8
    Views
    383

    Re: konica minolta / Devlop C554e

    +1
  25. Replies
    20
    Views
    639

    Re: Ricoh SP c820dn dirty prints and transfer belt

    Of course you can't use machine with drums or toners are pulled out just fix the copy quality problem sometimes you will need to fit parts start with magenta pcdu new oem that will setup when...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4