Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.46 seconds.

  1. Replies
    0
    Views
    7

    [Jamming] MP C401ZSP J004 issue

    This one is driving me mad!

    Paper is not being picked up from tray two (all rollers replaced no change)

    If I run the motor for tray 2 & the clutch in output checks the rollers all drive fine!
    ...
  2. Replies
    7
    Views
    290

    Re: Ricoh Mp4001 - Is this machine good?

    This model is so old now soon parts will be discontinued.

    Consider the MP xx54 series these are a good reliable machine.
  3. Replies
    31
    Views
    922

    Re: C280 J-3003

    If it feeds thicker paper just fine you can rule out clutches & sensors etc.

    The fuser has various bearings & bushings they are self lubricating however will dry out over time causing the fuser...
  4. Replies
    4
    Views
    2,640

    Re: servise manual & part catalog IR 5050

    5 year old link still working!?
  5. Replies
    31
    Views
    922

    Re: C280 J-3003

    You say the machine was running for "2 hours continuously" this does sound excessive, how long was/is the print job?

    Paper quality can make a big difference especially on these older models. Try...
  6. Replies
    11
    Views
    295

    [Misc] Re: AirPrint icon not found on c454e

    We can supply you with this firmware file(s) should you still need it.

    Feel free to drop us an email enquiry.

    Kind Regards.

    www.copierfirmware.co.uk
  7. Replies
    3
    Views
    151

    [Error Code] Re: Ricoh MP 3010 Welcome Screen only.

    "All main parts replaced" please list them all.

    However I would start by fitting all the original parts back to the machine & try updating the firmware before replacing any hardware.
  8. Re: Latest Firmware for Kyocera TaskAlfa 420i

    [/QUOTE]


    We can supply you with this firmware file(s) should you still need it.

    Feel free to drop us an email enquiry.

    Kind Regards.

    www.copierfirmware.co.uk
  9. Re: Some MFPs stop communicating with the CSRC

    Thanks i'll check these setting next visit.

    Are they only available via Pagescope or can I change this setting via the device panel?
  10. Replies
    6
    Views
    152

    Re: Konica Minolta Bizhub C203 Firmware

    We can supply the latest version.

    Firmware Update - Printer & Copier Firmware
  11. Re: Some MFPs stop communicating with the CSRC

    Most of mine dropping off are 4e series.
  12. Replies
    1
    Views
    102

    Re: Biz 654e firmwear

    We can supply the latest version should you need it drop us an email.

    Firmware Update - Printer & Copier Firmware
  13. Re: Some MFPs stop communicating with the CSRC

    I am facing this same issue it seems that after upping the function version these machines fail to connect.

    Where do I need to turn back on these TLS setting please?
  14. Re: Canon Imageclass MF6590 stuck on download standby

    Common issue on this Canon engine.

    You need to reflash the firmware.
  15. Re: Konica Minolta C224e - Transfer Roller Unit

    You don't need to replace this part, simply reset the counter in CE mode.

    However if you do want to place it this is the part number, it simply unclips no tools are required.

    2nd Transfer...
  16. Re: Image Tilts on Both Printed and Copied- IRAD5030

    OK first, does this skew happen only when photocopying or also when printing?
  17. Replies
    24
    Views
    2,118

    Re: Mp c4502 scan to smb problem

    Happy to help drop us an email.

    Firmware Update - Printer & Copier Firmware

    46859
  18. Replies
    8
    Views
    152

    Re: Bizhub C552 background

    What does this mean "drums/devs has already been reviewed, transfer unit has also been reviewed"

    So you replaced ALL image units & the transfer unit?
  19. Replies
    7
    Views
    276

    Re: Canon C1022i scanning ?

    Yes isend model you can scan via email & SMB also.
  20. Replies
    7
    Views
    276

    Re: Canon C1022i scanning ?

    If i remember correctly you need to install Network ScanGear then you can pull scan.
  21. [Misc] Re: Import/Export address book from C308 to C300i

    Import/export worked fine via Pagescope which was a bit help as there were around 50 SMB entries this saved me a lot of time!
  22. [Misc] Re: Import/Export address book from C308 to C300i

    The menu layout is different on the i series, but is the import section in the same place?
  23. Replies
    18
    Views
    823

    Re: IMC3000 NVRAM zero counter

    Exactly! I can't think of any issue with a copier that you would need to reset the main counter to resolve a fault.
  24. Re: Firmware language display RICOH MP C4503/C5503

    We can supply you with the Italian language should you require it.

    Firmware Update - Printer & Copier Firmware
  25. Replies
    50
    Views
    13,962

    Re: reset tool, A145FW.tar

    Ok so this is the machine I need to reset the C368 CE password on.

    Following this guide I get the message that my username/password is incorrect.

    Does anyone know what link above I need to use,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4