Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    18
    Views
    921

    [Misc] Re: Bizhub 4050 firmware information ?

    Explain how he could 'brick it' I'd be interested to hear your opinion ?

    Wrong firmware, no the machine won't except it.

    I guess the only way would be powering the machine off half way through...
  2. Replies
    8
    Views
    476

    Re: Tasklafa 5501i scaner

    Update the firmware then try a scan again.
  3. Thread: TLS 1.3

    by copier tech
    Replies
    10
    Views
    493

    Re: TLS 1.3

    Yes SMB is scan to folder protocol I used this as a security example.
  4. Replies
    1
    Views
    158

    Re: Bizhub 220 c - 0211

    Check the by pass, they often get knocked especially if the copier is by a door etc.




    Code: C0211
    Description:Manual feed up/down abnormality
    • Paper does not unblock the manual lift-up...
  5. Thread: TLS 1.3

    by copier tech
    Replies
    10
    Views
    493

    Re: TLS 1.3

    It is always good practice to have the highest level of security whenever possible.

    You most likely heard about the SMB v1.0 vulnerability & WannaCry.

    Most models no older than 3 years all...
  6. Replies
    18
    Views
    921

    [Misc] Re: Bizhub 4050 firmware information ?

    Happy to help you with the latest firmware & service manual should you still require it.
  7. Replies
    5
    Views
    368

    Re: Help movie data bizhub c227

    Yes, here at copierfirmware.co.uk we are always happy to help. :cool:
  8. Replies
    5
    Views
    368

    Re: Help movie data bizhub c227

    Happy to help.

    www.printerfirmware.co.uk
  9. Replies
    3
    Views
    217

    Re: MP C3004 - SC995-03

    Try reseating all the controller connections, clean the RAM contacts & update the firmware is where I would start.
  10. Replies
    5
    Views
    294

    Re: Sc860, sc819

    Sounds like the HDD has failed try replacing it.
  11. Thread: ir8500

    by copier tech
    Replies
    5
    Views
    343

    Re: ir8500

    Well done! yes there are a few sensors in that area.
  12. Replies
    6
    Views
    361

    Re: BH-C-280 showing FA-14

    Update the firmware first if this doesn’t resolve the error unplug the HDD & power on.
  13. Thread: ir8500

    by copier tech
    Replies
    5
    Views
    343

    Re: ir8500

    If you suspect PS10 is faulty you can swap it with another sensor in the machine as a test (most are the same check the part numbers)
  14. Re: Does Kyocera make a program to quickly pull settings and transfer to new machine?

    Poster has not mentioned what models he is referring too.
  15. Replies
    10
    Views
    719

    Re: SOP IM 430F

    Update the firmware this was/is a known issue.
  16. Replies
    19
    Views
    1,365

    Re: Mp 3353: Toner icon dislay, missing sp(?)

    SP 5061 displays the toner remaining icon on the screen.
  17. Re: MP C306 wifi only print without scanning or Web Image monitor

    Yup, that doesn't work.
  18. [Error Code] Re: Develop INEO+ 554e/Konica Bizhub C554e - 0.00% TCR-C

    Try updating the firmware could have been corrupted especially if you are fitting used parts.
  19. Re: Does Kyocera make a program to quickly pull settings and transfer to new machine?

    How about Simulation code U917 import/export to USB pen.
  20. Replies
    3
    Views
    260

    Re: bizhub C4050i Won't update firmware

    As Synthohol said but we have found sometimes it may take a few attempts to accept the FW. Usually a reboot & try again it will work.
  21. Replies
    17
    Views
    1,160

    Re: Office 365 No Longer Works on Bizhub's

    0365 will work fine on the 4e and 8 series.

    Sounds like you are not configuring them correctly.

    As always update the firmware to the latest version will resolve most issue.
  22. Re: kmbh c452 print yellow background on every printout p-22 error code appear

    This was a post from the year 2014. I will assume the original poster has resolved the issue by now.
  23. Replies
    174
    Views
    44,561

    Re: i have all of canon service+SST

    Drop us an email, all the latest Canon system software & SST available.

    www.copierfirmware.co.uk
  24. Replies
    17
    Views
    1,160

    Re: Office 365 No Longer Works on Bizhub's

    4 & 3e series are still supported, as you know you simply need to update the firmware.
  25. Replies
    8
    Views
    583

    Re: help Initializin data

    Happy to help.

    Please contact us at the links below.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4