Search:

Type: Posts; User: KJEpps

Page 1 of 3 1 2 3

Search: Search took 0.10 seconds.

  1. Replies
    8
    Views
    435

    Re: Kodak I3200 scanner

    Yeah, that shaft is chewed up. I did find a source for the parts though. Scanstore in the US, which is where I am.
  2. Replies
    8
    Views
    435

    Re: Kodak I3200 scanner

    :( Yeah, I was afraid of that. Thanks for your responses though.

    Stay safe out there!
  3. Replies
    8
    Views
    435

    Re: Kodak I3200 scanner

    Yeah, the shaft with the bad bearing drives the first set of orange rollers. What I'm finding mostly online are the consumer replaceable rollers and kits. Did they sell you the shaft or did you have...
  4. Replies
    8
    Views
    435

    Re: Kodak I3200 scanner

    Hi Polarbear,
    Were you able to come up with a manual. I need a part number for the front transport roller drive shaft with bearings. I'm also curious about what you dealt with. On the one I'm...
  5. HP M577 jams only when duplexing with 13.B2.DD (M552 or M553)

    One of the other techs (has been a Xerox tech all his career and is just beginning to work on HP's) has been working on this problem. This M577 is located an hour away, so when I take over, I would...
  6. Re: DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    Update: So I can't say whether I plugged that power connector in incorrectly, because I had reseated both cables so many times that when I rechecked, everything was plugged in properly. Since there...
  7. Re: DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    I don't see an interconnect board near the display, but there is one to the left of the formatter (if you're facing the back of the machine). Is that the one you're referring to?

    I replaced the...
  8. Re: DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    This one is a B version so they gave me p/n CQ109-67044 which subs to CQ109-67052. The CQ111B uses an encrypted HD.
  9. Re: DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    Well I went back today and tried to flash the firmware. No luck, still the blank white screen. Tried to go into Diag Mode, same thing, blank screen. Talked to HP Tech Support for authorized service...
  10. Re: DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    I reseated the connection both at the Carriage and at the Interconnect board several times. In as bad a shape as they were, I finally even tried the old Trailing Cables. No change in light patterns.
  11. DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly

    Confirmed that the printer had the reported error of 86:01 (Carriage Servo Shutdown) that wouldn't clear. During troubleshooting I noticed that there were tiny metal threads along the carriage path...
  12. Hiring Experienced Printer/Copier Tech in St. Louis area

    One of our techs is retiring, so we have an immediate need for a tech with experience in repairing and configuring printers and multifunction devices. Our company works exclusively with Xerox, HP and...
  13. Replies
    4
    Views
    965

    [Jamming] Re: HP Laserjet CP3525

    Did you ever resolve this?

    I am having the same issue. Have replaced the fuser multiple times - final time with a new and genuine HP fuser. Also tried the Paper Delivery Assembly. Still crinkles...
  14. Lexmark MS510 - Do you have one that you can take an interior picture of?

    The printer I'm working on is printing all black pages. I've tried 2 different Imaging Unit without change in symptom. I noticed on the left side at the far end of a black plastic guide that there...
  15. Replies
    2
    Views
    480

    Re: looking for Service manual CP3525

    Try feedroller.com
  16. Replies
    3
    Views
    1,377

    Re: Laserjet M806 Noise

    I would like to know the answer as well. I was called out today to work on an M806 with frequent jams (13.B9.A2) at the fuser. This is the first one I've had to work on and I noticed the same noise...
  17. Replies
    5
    Views
    3,740

    Re: LaserJet P3015 phantom 13.20 error

    This just happened to me. It would report a 13.20 or a 13.02 jam error. I found this thread on the subject and replaced their reman. toner. Fixed it!

    Thanks for posting! Saved me a whole lot of...
  18. Replies
    4
    Views
    5,878

    Re: LaserJet M521dn - Scanner Error 16

    Thanks, Wild Bill! I'm curious. Where did you get this info? My version of the Service Manual didn't have it.
  19. Replies
    4
    Views
    5,878

    LaserJet M521dn - Scanner Error 16

    I'm in a bind. I have a LaserJet Pro MFP M521.


    The customer initially brought it in for not initializing. I replaced the Formatter Board and all was good for about 4 days. Then the customer...
  20. [CQ] Re: Color LaserJet M750dn printing faint in all colors

    The customer opted to try the Transfer Kit first. He just notified me that it didn't fix the problem, so I'll be ordering the HVPS's.

    I'll keep you posted...
  21. [CQ] Color LaserJet M750dn printing faint in all colors

    I printed the Print Quality Troubleshooting pages and all colors are evenly faint (no streaks or lines). I checked to make sure the printer was plugged into the wall and not a surge suppressor. I...
  22. Replies
    3
    Views
    465

    Re: Zebra P330i card printer with broken frame

    Have you tried this on this particular model before? That post holds a bracket that the ribbon tension spring is attached to, so there is some pretty significant force being applied to it.

    (I...
  23. Replies
    3
    Views
    465

    Zebra P330i card printer with broken frame

    I'd love to get my hands on the service manual for this, but even if noone here has one, maybe you can provide some advice.

    A post snapped off of the plastic frame, so initially I thought it would...
  24. Replies
    9
    Views
    1,872

    Re: T1100 Generic Firmware Error

    Sounds like you have a very strange problem. Hope you can get it squared away. If you remember, update this thread when you figure it out. :)
  25. Replies
    9
    Views
    1,872

    Re: T1100 Generic Firmware Error

    Very strange. This is where I got the manual. http://www.lpscomputer.com/ec/Designjet_T610-T1100_service_manual.pdf
    On the cover page it says, Version 6, March 19, 2009. What is the version of your...
Results 1 to 25 of 56
Page 1 of 3 1 2 3