Search:

Type: Posts; User: aazim

Search: Search took 0.07 seconds.

  1. Replies
    1
    Views
    457

    Re: Oce plotwave 340 printing solid black page

    Missing charge.Probably torn charge wire
  2. BH 754 does not want to reset Developer Unit counter

    Bizhub 754. Total counter - 1 231 000. Replaced Developer and drum units simultaneously. Both new, OEM, in boxes. After switch ON - Drum unit counter was reset 0M/100% , Developer unit counter-...
  3. Replies
    3
    Views
    762

    Re: Bizhub 754 Movie Data

    This is from other post for other Bizhub but it sound like my case

    Re: Konica Minolta C280 Not Printing
    Glad to hear you fixed it.

    When you do an all clear the HDD is unset, simply go back in...
  4. Replies
    3
    Views
    762

    Bizhub 754 Movie Data

    I must perform "clear all data" on my Bizhub 754 but i don't have *.tar movie data file to upload after.
    Can somebody here help me? I'll be glad if i have and a firmware for this model.
    Thank you...
  5. Replies
    3
    Views
    5,800

    Re: BIZHUB 750 ERROR C3502-3

    Try with cleaning of the rear side thermistor TH2 ( which is in contact with fuser roller). If not help - replace it. This solved my c-3503.
  6. Replies
    6
    Views
    1,898

    Re: BizHub 601 toner in fuser?

    For me overheating fit everything you described. As a rule the high temp causes toner sticking over fuser roller. I know BH 600/750 but I think BH 601 have the same body and service mode. I have...
  7. Replies
    6
    Views
    1,898

    Re: BizHub 601 toner in fuser?

    Toner on "entrance plate" for me is not enough adhesion of the toner on paper. Check the transfer and humidity of the paper. Switch ON the dehumidifier (up on the power cord). I have experience with...
  8. Replies
    3
    Views
    425

    [Jamming] Re: BH 600 DF-640 part#

    It's correct.. my mistake
    Thank you 'blazebusiness'...
    Wish you peace and love...
    the smallest things make us great...
  9. Replies
    1
    Views
    1,178

    Re: Cannot adjust Grid Charging on Bizhub 600

    Solved.
    I tried to get the machine to work with non-original toners. One who tore my life was original, but HP 9055 (which is actually Di650). Tried also 2-3 unknown brands, but labeled as BH 600 -...
  10. Replies
    3
    Views
    425

    [Jamming] BH 600 DF-640 part#

    Hi colleagues,
    I need the part numbers of feed and separation rollers of DF-604 on BH 600/750.
    I'm not a KM technician and have part manual only for the main body.
    I appresiate any help.
    Best...
  11. Replies
    1
    Views
    1,178

    Cannot adjust Grid Charging on Bizhub 600

    All starting with my battle about over toning. I read and test everything I find about over toning, dumping etc. for this model. Grounding the drum, changing dpSW 32-0, 32-2, 05-0..
    Then put a new...
Results 1 to 11 of 11