Search:

Type: Posts; User: Waylon

Search: Search took 0.09 seconds.

  1. Replies
    9
    Views
    583

    Re: Sharp MX B402 /PRIMARY TRANSFER UNIT

    MXB402SC models have a scanner in the adf. MX-B402 models do not. IF you MUST clean the optics in the engine, YES, it is a royal pain because not only do you have to remove the adf, but you have to...
  2. [Misc] Re: Panasonic Workio 1520 Toner stripes at edjes of drum.

    The end seals on the Mag roller are going bad, the end seal at the mag roller ends (front and rear) may be a 2 part seal, with foam glued to the unit and a felt type pad over it. at some point with...
  3. Re: Kyocera P6130CDN toner ponding to black drum surface

    I should add that another symptom is the charge roller sticking to the drum and when you force the rotation the photoconductive coating on the drum will come off leaving the bare core for toner to...
  4. Kyocera P6130CDN toner ponding to black drum surface

    This color machine has repeatedly had calls where toner has bonded to the drum in dotted streaks has not happened on any other color, just the black. in the attached picture the toner is stuck to...
  5. Replies
    7
    Views
    1,048

    Re: MX-C401, E7-11 code...

    Another "Quick fix" try is to oil the optics rail. We have learned over the years that sometimes the scanner does not jog back an forth quick enough when it initializes and can cause the E7-11. we...
  6. Replies
    1
    Views
    992

    Re: Panasonic stand alone scanners

    Good luck with this. The last I heard, Panasonic was locking down the service utility software so tight that even if you got certified on the machine they would only enable the software to work on...
  7. DP-C322 ADF/scanning slows to about half speed in middle of job.

    I always test the adf's for jamming using the the job build feature in copy mode. That way I can run hundreds of pages thru the adf without making copies. I had run about 1,200 pages thru the adf...
  8. Replies
    0
    Views
    398

    [Wanted] SC Board for DP-2310

    I am looking for an SC Board for a DP-2310 Panasonic copier, It is Model Specific so no other Model will do. Just need a used one that still works. The actual Part # is DZEZ000084.
  9. Replies
    6
    Views
    5,092

    Re: Dp-mb300 drum reset

    Amazing. on older models that used the same Fused link for drum replacement i know of at least one tech that tried shorting the blown fuse and it got the machine going but he left it shorted and...
  10. Replies
    49
    Views
    10,315

    Rubber rejuvenator? any suggestions

    when cleaning feed rollers in copiers etc. we used to used alcohol, but that dries out rollers and shortens their natural life.

    for years we have used a product called HL Platten cleaner, by...
  11. Thread: Scanning

    by Waylon
    Replies
    5
    Views
    859

    Re: Scanning

    Sounds like the network or something on the network is partially or completely blocking the Port 6509 that the communication utility uses to communicate on the network.


    when the Panasonic...
  12. Replies
    6
    Views
    1,692

    Re: WIPE HARD DRIVE..on a Panasonic DP-3035

    8060 is part of the 8035 family so yes it will be the same. so will most of the color machines Panasonic no longer makes. the exact # in the general settings list may vary.
  13. Replies
    8
    Views
    851

    Re: Workio DP-3030 Dark copies

    if cleaning and adjustments dont help it could be the CCD gone bad. I have seen a couple of these with this symptom but it is very rare.
  14. Replies
    3
    Views
    540

    Re: DPC Question on Toner and Developer

    The key for the toner bottle is actually on the shutter for the dispensing whole on the bottle. i have moved shutters between C322 amd C354 series bottles when one was on backorder. it just slips...
  15. Replies
    6
    Views
    1,692

    Re: WIPE HARD DRIVE..on a Panasonic DP-3035

    never heard of a DP-3035, there is a DP-3030 or maybe a DP-8035. either way there are some HDD format options. from copy mode, pres Function, general settings, key op mode (password default is 8...
  16. Panasonic DP-C322 after market toner. anyone using?

    I have recently learned of a company called AAAtoner.com that has after market color toner. they have refill bottles that are significantly cheaper but I am afraid to try it this late in the game...
  17. Replies
    0
    Views
    179

    [Wanted] Panasonic FP-7121,7117, 7127, 7132 LVPS

    Customer insists that the machine should be repairable so we are looking for a working low voltage power supply (North America), used or new doesn't matter. Original Part # is FFPWB052711. The same...
  18. Replies
    5
    Views
    576

    [Misc] Re: Panasonic 4530 Toner Hopper

    On this series, when your copies are light, Cheat the front door interlock so you can run copies with the front door open. Take the plastic catch tray/ cover off the botton of the toner hopper. ...
  19. We are going by the total page count when the fc...

    We are going by the total page count when the fc web was last replaced and when we strart having a copy quality problem because the web has run out and in most cases has trashed the heat roller. The...
  20. Replies
    16
    Views
    2,959

    I would like to add another factor that promotes...

    I would like to add another factor that promotes fuser jamming, that is FC webs that are too dry. web should be moist but not dripping with fuser silicon oil. if it is not I add some to the web. ...
  21. DP-3030 Fuser Cleaning webs getting half the rated life.

    We have been dealing with the issue of the web not advancing properly in some of these machines and have a pretty good handle on that. Now that we have machines running with no advaning problems we...
  22. Replies
    8
    Views
    1,080

    You may want to look into shanging over to the...

    You may want to look into shanging over to the web advance drive used in the latest model of that series DP-8025/8032. There are too many variables with the original system, even with the bulletins...
  23. Replies
    2
    Views
    900

    Mismatched firmware

    The machine has 3 boards that have operating firmware on them. each board will have its own version. If the version are not compatible with one another it is possible to get a garbled display. Basic...
Results 1 to 23 of 23