Search:

Type: Posts; User: eddy out

Page 1 of 4 1 2 3 4

Search: Search took 0.44 seconds.

  1. Replies
    3
    Views
    247

    Re: C5035 Copy Quality

    have you tried 2nd transfer roller?
  2. Replies
    12
    Views
    965

    [Jamming] Re: Ricoh MP C4503 jamming 11" paper

    when the 3 gears wear down they leave a pile of debris at the back side under the fuser.... have you noticed that? I have seen the gears cause similar issues.
  3. Replies
    21
    Views
    1,230

    Re: Dirty environment causing DF problems

    try AF032080 roller on the reverse roller hub for double feeding. D6832417 - SHEET:ENTRANCE:SEPARATION PAD is the engineers resolution for double feeding, if it is available yet.
  4. Replies
    11
    Views
    853

    Re: MPC5503 Fusing sleeve belt unit - 400k?

    may I ask if this original post is replacing the sleeve "only" onto a used sleeve unit? I've personally replaced the sleeve unit, press roller and bearings, plus 3 gears and two thermistors. Are...
  5. Thread: RicohFirmware

    by eddy out
    Replies
    7
    Views
    679

    Re: RicohFirmware

    301 bundle is romdata last time i used it. on the 02, be sure not to use greenline, and i don't see a pkg. give more info...
  6. Replies
    30
    Views
    3,005

    Re: MPC3003 Light copies

    scanner, for sure. optics?
  7. Replies
    6
    Views
    520

    Re: S/C ERROR 240-1

    insure you don't have toner piled up in the laser path (maybe poor copy quality wo code) . laser unit?
  8. Replies
    12
    Views
    1,377

    Re: MP C4503 Ghosting

    My PSG says 400k is the expected life
  9. Re: Is the separation roller in feeders supposed to spin backwards?

    I have had trouble with the SPDF double feeding....Remove the reverse roller (2241) from the hub and put a AF032080 blue reverse roller on that black hub. This has resolved my issues completely.
  10. Replies
    16
    Views
    1,667

    Re: MPC305 with SC899 at power up

    locate the print job that is failing and delete
  11. Replies
    2
    Views
    440

    Re: MP C6502 "Project"

    yes, I have done this before. It isn't too bad a job and you only need but one person. You will need to dig in some to get to the motor, but it was not difficult. Tech bulletin 144
  12. Re: Pro 5210s new out of the box with banding 2" apart only on black

    I did not load paper library data, but I have changed paper type to a thicker and textured type with an improvement in density although the banding remained. DEMS was done and interestingly the...
  13. Pro 5210s new out of the box with banding 2" apart only on black

    This is a brand new Pro 5210s that can make a great color image that appears ok. The colors are all fine, but the banding becomes very evident on gray halftones with 2" spacing. i have attached a...
  14. Re: MP C 3002 (black Toner) Toner not set correctly

    I think you are correct. You should simply get the toner for your box, the firmware will only permit the black toner intended for the reman machines. Sorry for my mistake.
  15. Re: MP C 3002 (black Toner) Toner not set correctly

    Yes, that is what I have seen. If you look on the TSRC site for the firmware on this model you will notice the "Greenline" firmware is there. If the machine you have is a Ricoh remanufactured box,...
  16. Re: MP C 3002 (black Toner) Toner not set correctly

    try the Ricoh Greenline firmware. I have seen this on a machine in the US w Greenline firmware loaded
  17. Re: Horizontal Lines On Copy And Scan In Mp5002

    so this is a copy of the count page? from glass and/or df? have you cleaned optics?
  18. Replies
    2,557
    Views
    2,249,499

    Re: Just how Crazy is Donald Trump!

    Flynn got duped...I imagine you are about 15 yo. everything you say is so immature and extremely biased. Flynn could have misstated or forgotten anything, and the Mueller group would hang him by his...
  19. Replies
    2,557
    Views
    2,249,499

    Re: Just how Crazy is Donald Trump!

    Are you serious? Just go shag away, salesserviceguy. He was fired because he was the big leak in the FBI. I see you are still making excuses for a lost cause. Andy is protecting your hero Barry...
  20. Replies
    15
    Views
    1,283

    [CQ] Re: mpc 4502 pcu's crusty toner

    i agree with Phil B...I do not see Genuine anywhere on that box and have always considered OEM to be the real thing. Can aftermarket suppliers now print OEM on their boxes of toner? None of my...
  21. Replies
    2,557
    Views
    2,249,499

    Re: Just how Crazy is Donald Trump!

    tip cash whenever possible.
  22. Replies
    2,557
    Views
    2,249,499

    Re: Just how Crazy is Donald Trump!

    salesservicguy, are you shooting for a record divisive thread? You seem so adept at stirring up the stink...
  23. Replies
    3
    Views
    432

    Re: Mpc5501 first page has wide grey line

    can you provide an attachment? I would like to see it.
  24. Re: Lanier MP 7502 issues when printing mixed sizes...

    don't let the size of the machine intimidate you...they are simply bigger printers. This is probably a driver setting. Watch the operator's actions and look to see if what you are thinking is...
  25. Re: Ricoh - PM (preventive maintenance) reset - at old copiers and at new copiers

    the web is not "neverending," first of all...furthermore, you should always have a web 'near end' message enabled. on this particular machine, the fuser can run a very long time since the web seems...
Results 1 to 25 of 91
Page 1 of 4 1 2 3 4