Search:

Type: Posts; User: JR2ALTA

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    2
    Views
    73

    Re: Why so many photosensors?

    Thanks. I was thinking of Sharp actually. They seem to have different ones for ADF, PPDs, APPDs . The fuser makes sense to have a different material but it sure looks like same.
  2. Replies
    2
    Views
    73

    Why so many photosensors?

    As far as I know, the size and "clip in" feet of photosensors are damn near universal. And a photo sensor is either resting ON or resting OFF. To me that's a very binary concept.

    So does a...
  3. Thread: 5002i - C6600

    by JR2ALTA
    Replies
    7
    Views
    341

    Re: 5002i - C6600

    I think Kyocera moved past 163 a while ago.
  4. Re: Kyocera Ecosys P2135dn / P2040dn Status Page Shortcut

    This is good to know. I always thought people were using .prn files and it never worked for me. Probably because it should have been .capt
  5. Replies
    1
    Views
    191

    Re: SHARP MX6050N CPFD1N jamming

    Given the work you've done, I would provide a case of paper and let them run that for a while.

    And this is a reflective sensor correct? I was surprised to learn just how tricky it is to see the...
  6. Replies
    11
    Views
    503

    Re: Xerox C60 copy quality issues

    It's all about the paper on these.
  7. Replies
    11
    Views
    503

    Re: Xerox C60 copy quality issues

    You can't run Xerox production machines using default paper settings. You need to go into admin mode and create your own paper catalogue. You need to print out a transfer adjustment chart (SIQA) and...
  8. Replies
    6
    Views
    362

    Re: mx-4141 jams under 2nd transfer unit

    Yep these inner teeth would get shredded.
  9. Replies
    6
    Views
    362

    Re: mx-4141 jams under 2nd transfer unit

    I think the notorious gear was on it's predecessor the mx2600 family. Although it may have some similar design to it.
  10. Replies
    8
    Views
    434

    Re: TA 2552ci has C7001 error

    I bet your waste bottle isn't turning. Vacuum the waste channel under the main drive, vacuum out the transfer unit or replace and replace the waste assy.
  11. Re: Kyocera M3660 frozen at start up just logo

    Any solution on this rapiddocument? F906?


    Please update your questions in this forum whenever possible. This site must operate as a community.
  12. Thread: Hp 602

    by JR2ALTA
    Replies
    12
    Views
    494

    Re: Hp 602

    My first thought would be something broken on the cassette itself. HPs aren't known for bad sensors. If you have to bite the bullet the whole options feed assy isn't that expensive...

    HP...
  13. Thread: TA PRO 15000C

    by JR2ALTA
    Replies
    6
    Views
    724

    Re: TA PRO 15000C

    i don't think this was made Kyocera. Isn't it a rebadged Canon or Ricoh?
  14. Replies
    9
    Views
    513

    Re: The Copier Network

    There wasn't a Kyocera-Mita I couldn't fix without the help of the boys at Dnet-km.com Been gone at least 5 years now.
  15. Replies
    9
    Views
    570

    [Misc] Re: Prescribe command

    You went through the driver with a fine toothed comb? And the machine "Printer settings". I can't say 100% Kyoceras can do this but most manufacturers can.
  16. Anyone have a 6 inch Katun wood handle screwdriver?

    These used to be standard issue with Katun tool bags. I've owned a few and sadly lost a few. I would pay some bucks for one via Paypal. Let me know, with picture if you can.
  17. Re: [Jamming] Kyocera km-2050 jamming on fuser roller

    At this point call a tech but be prepared to hear parts are no longer available.

    You can find a refurbished copier for pretty cheap that at least 10 years newer than this model.
  18. Re: 4501i Perfect copies, light prints and reports

    What the guys are getting at is there's TWO eco modes. One for copy, another for print.
  19. Re: [Jamming] Kyocera km-2050 jamming on fuser roller

    You're taking me back in time, LOL. Wasn't that bad gear for duplex jams though?
  20. Re: How to calibrate drums of Sharp machines (MX-2640N)

    I do maintenance in this order: 44-2, 50-22, 44-27, 44-6,44-26, 46-74

    50-22 is the color registration (your problem) it will direct you to turn the calibration screw either right or left for each...
  21. Re: KM-3252ci black only banding issue crossfeed

    OK, for what it's worth I went down the 930 path as well. After a second PM kit, image PWB and HV PWB I was still stuck. Copies would be good for a few days or weeks.

    My kyo rep quickly spotted...
  22. Re: KM-3252ci black only banding issue crossfeed

    Where consumable counts accurate in the U000 report?
  23. Replies
    7
    Views
    469

    Re: FS-4100DN Casette 1 Lift Issues

    Replace your gear driven CT-3130 with the spring loaded CT-3100 pn 302MS93018

    This is common practice as the post for the lift gear (in machine) fractures and it's a PITA to replace. Only mod...
  24. [Jamming] Re: TA 3501 Jams a Reg roller I believe 113 Jams Pic included

    You should really know the code after going there twice and it's so far away. If it is 113, that's an oddly specific code. The machine must feel the door is opening. I'd look at the front and rear...
  25. Re: KM-3252ci black only banding issue crossfeed

    Yes this looks familiar. I'd ask you to look at your U000 report and tell me if the machine has recognized any of the new black drums/devs SIMS 110,158.

    I suspect not. If you installl a drum or...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4