Search:

Type: Posts; User: TonerMunkeh

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Re: MPC 5504 Ex Service Lock and Changed Passwords

    Try this:

    How to do a forced start up with no encryption key
    If the encryption key back-up has been lost, follow the procedure below to do a forced start-up.
    • The HDD will be formatted after...
  2. Re: MPC 5504 Ex Service Lock and Changed Passwords

    The nvclear procedure is available on the 04's and it's definitely worth a shot as the machine asks for new passwords for admin and supervisor after restarting.
  3. Re: IM550f is turning itself off when booting up

    Ops panel main board is the usual cause for this.
  4. Replies
    5
    Views
    182

    [Misc] Re: Ricoh 5100s Pro

    5 years or 6.5m I think the volume life is on the 5100. Parts are still available and will be for a while yet, the Pro 5210 and 5310 share a good chunk of parts with it.
  5. Replies
    19
    Views
    544

    Re: Black band on Copy from Aficio 1022

    After 5 years that cleaning blade with be more yellow than Big Bird with jaundice. Just replace the PCU, problem solved.
  6. Replies
    8
    Views
    552

    Re: Ricoh Mp c6004 Sc865-01

    They are just bog standard SATA cables, don't see any reason why not.
  7. Replies
    19
    Views
    544

    Re: Black band on Copy from Aficio 1022

    Does the mark show up on a counter page? If so, PCU. If not, optics.
  8. Replies
    11
    Views
    321

    Re: Ricoh C5100pro not booting up

    https://www.ricoh.ca/en/officelocator
  9. Replies
    6
    Views
    311

    Re: MPC8002 672-12 code

    Had the HDD cause this code on several models, mainly the MPC306.
  10. Replies
    11
    Views
    321

    Re: Ricoh C5100pro not booting up

    Sounds like you have had a PSU go bang. Check the ones under the bottom cover for scorch marks etc. Was the machine running okay prior to this or was this something that happened after other...
  11. Replies
    12
    Views
    438

    Re: SOP firmware help!

    What do you mean by "it doesn't work"?
  12. Replies
    8
    Views
    279

    Re: ricoh mp c3003 - error sc665-02

    Tullio what has happened to this machine for it to get this code?
  13. Re: Ricoh SP 5300DN wont print "Load paper in bypass tray" error message

    For whatever reason it isn't detecting the paper in tray 1. Check the paper size selector on the front of the tray, make sure it's set to the correct size. Make sure the switches that selector pushes...
  14. Replies
    7
    Views
    319

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    What sort of mileage is this thing on? The exit units start to get a bit tired around the 1.5m mark.
  15. Replies
    17
    Views
    567

    Re: sc670_01 SC670_02 ricoh mpc307SPF

    If it carries on playing silly buggers replace the toner hopper and the BRB board.
  16. [CQ] Re: MP2851 light print jobs and "Add Toner" message

    If the gears in the lower development case are mullered the ones on the mag roller will be too. It doesn't come as a complete unit.
  17. Replies
    18
    Views
    1,040

    Re: New MP 301 drums

    I've still got 800-ish about, I'll keep you posted if I am fitting them as often.
  18. Re: Mp c5503 exit jam & fuser pressure cycles

    Those paper transport IOB boards are a heap of shit.
  19. Replies
    8
    Views
    383

    Re: Ricoh MPC2503

    One of the belt assist feed rollers in the side door being stuck or slowed with paper dust is also a good cause for this.
  20. Replies
    37
    Views
    1,534

    Re: Speed/processor performance

    Top remedies for slow printing are disabling WSD and using print as image in Acrobat. The processors on the MPC2051 are faster than on the lower end 03's.
  21. Replies
    7
    Views
    488

    Re: Smart panel some apps missing

    You have to go into recovery mode. Make sure the panel is in NORMAL startup mode then reboot it. If all the icons come back, joy. If not:

    Power off machine, press and hold EX1 and EX3. When the...
  22. Replies
    14
    Views
    592

    Re: Middle marks in MPC2050

    The ITB cleaning unit lives on the left side of the machine behind a cover with two screws. It being full can cause problems like this.
  23. [Misc] Re: Ricoh Afcio SP C830dn streaking and faded lines

    It always worries me seeing these machines converted with ceramic toner, it's like the Gelsprinters converted to run dye sublimation ink.

    Anyhoo, have a look at the "SUPPLIES" menu on the front...
  24. Re: Different Counters in SP mode - user mode

    Is A3 double click switched on?
  25. Replies
    3
    Views
    293

    Re: sc921 in garment RI2000

    921

    Platen height sensor error while platen table was rising


    Platen height sensor did not detect the platen table rising


    Platen lift motor defective
    Platen lift motor connection...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4