Search:

+1 for the bracket adjustment, we also had some PC417 jamming directly out of the box

In my "EU" market region I can run a C454e/C458 even without a toner installed so it seems the MFP does not really care about the chip. This fix works for me, too.

I noticed that the C454e ignores a new toner if a customer replaced it before actual toner end condition.

Solution:

1. ignore the false toner remaining prognosis
2. remove the toner and run...

Interesting thought - I haven't checked the prices for the IMC PCUs so far because there was no need to order one but I try and have a look when we pre-install the next IMC in our workshop. What I...

lol ciao & thanks^^

Yeah I ended up to give my permission to order the "correct" drum units (I think it's round about an additional 100€/unit) and asked for the old parts so I can have a closer...

don't forget scan-to-ftp :o

It's the D239 drum unit

Hi Guys, I'm currently on leave and write in behalf of a colleage who failed to install a cmy mpc3004 drum unit in to a mpc4504 cmy - from my memory I'd tell it's the same unit but you needed to...

I prefer the 4e series engine but he 8series comes with a better controller and probably less potential compatibility issues at a foreseeable future. We mostly sell C308 2nd hand and a few C284e...

Are all mirrors properly in place? Perhaps the scanner frame is a bit skewed or the mfp chassis itself. You can try and loosen all screws from the mfp chassis-scanner and see if the results are...

Also check the door switches or "shake" the machine a bit while testing to see if they are ok. Back in the days door-jam related jams has been logged as "at power on" but that's not the case anymore,...

If the FW is up to date I'd say don't bother anymore ;) Might be just a bug, you'll probably find another MPC3003 to check that card + files.

We also prefer to vac the cleaning units if the ITB unit looks ok. You can also glue a sd card with firmware on the ITB :cool: It usually happens if the customer runs cheap paper and/or in dusty...

What is a "107 restart"? Do you mean some sort of reset via sp mode? How long does it run without image defekt after this procedure?

What also came up in my mind: Does all involving cooling fans...

Oh indeed... I have a copy of the Installer:

https://we.tl/t-bGPwkXbLYr

Try reformat the card with a tool called panasonic sd card formatter (google it) and give it another shot.

And yes, you just put the fwu into the romdata folder. If it doesn't work try just the...

Sample looks interesting. Is it a permanent issue visible on every page once the error shows up first time or does it come and go? IPU might be worth a shot but I'm not 100% convinced.

We don't have any issues with the Cxx4(e) series drum conversion, 99% of the initital or modified drums exceeds the predicted lifecycle by "a lot"

Looks like the display or display controller is faulty, probably all included in the panel assy so you should be fine after swapping the panel.
I also had this exit unit sound - in my case it came...

Please insert toilet paper :D

Probably a good budget solution but not suitable/safe in a book store if the customers are allowed to operate the MFPs.

So we see a magenta related issue. Try and print a3 full bleed magenta page and interrupt the print process to see what's going on. Check if the transfer belt and magenta drum surface is covered with...

Leave the oil, it's normal and just the springs loosing the inital force over time. I guess the engineers did not add much headroom while finding the right springs for that hinges ;)

The DF should stay open if you move it up like a 45 degree angle. If it falls back the spring mechanism inside the hinges might have became too weak over time. This usually happens over time if you...

Yeah that one with a little copper contact plate inside can cause this kind of effects in case it's missing or improperly connected.