Search:

Type: Posts; User: chrisio

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. [Error Code] Re: versant 80 error 099-341 Fusing Not Latch Up

    Fixed it!

    No idea what I did to be honest... removed and reinserted the fuser a couple of times and exercised the lift mech for the fuser on the table out of the machine and its come good! how...
  2. [Error Code] Re: versant 80 error 099-341 Fusing Not Latch Up

    Thanks - will do - can you point me in the general direction of the sensor please.

    Chris
  3. [Error Code] versant 80 error 099-341 Fusing Not Latch Up

    Hi.

    I have the v80 with the error code 099-341 according to Xerox I need to reboot the machine with the front door open and and the fuser tray pulled out and then reinstall. Having done this the...
  4. Replies
    1
    Views
    354

    Xerox 770 error code 78-152 jams

    Hi.

    Getting random jams with the code 78-152 from the high capacity deck

    it doesn't jam on heavy 300gsm+ card and only on the lighter stuff

    I have changed the pickup rollers etc in the...
  5. Replies
    1
    Views
    313

    upgrading fiery ex770

    Hi.

    I have a Xerox 770 running an ex770 fiery which is asking me to upgrade the command workstation - its currently running v5.7.0 and I can't see which version it wants to upgrade to.

    I have...
  6. Replies
    5
    Views
    504

    Re: DC242 over toning on black

    I have the new board coming in the next day or so. Is it just a case of swapping the board and all my troubles will be resolved ir do I need to set it up?


    Thanks
    Chris
  7. Replies
    5
    Views
    504

    Re: DC242 over toning on black

    Thanks.

    Is this the board https://www.iteminconline.com/105k20980_105k20980-xerox-docucolor-240-243-250-252-260-developer-bias.htm

    Is there any tests I can do or is it a case of swap it out and...
  8. Replies
    5
    Views
    504

    Re: DC242 over toning on black

    Thanks. Where in the service manual does it refer to this? Nothing comes up when searching for it.

    Cheers
  9. Replies
    5
    Views
    504

    DC242 over toning on black

    Hi.

    My dc242 is leaving a slight scattering of black toner over the entire sheet of paper- its so slight that when I scan the image its not picked up but if you hold the sheet next to a unprinted...
  10. Replies
    5
    Views
    671

    Re: Xerox DC 242 white lines on prints

    thanks. The tech has been out and been through everything - stopped the machine mid print and the image on the transfer belt had the deletions evident. Cleaned up everything possible he could see -...
  11. Replies
    5
    Views
    671

    Re: Xerox DC 242 white lines on prints

    Thanks - This all started from me swapping the yellow drum/dev out before which it was perfect (other than a worn drum) I removed and reinserted the drums, checked the transfer belt and I cant see...
  12. Replies
    5
    Views
    671

    Xerox DC 242 white lines on prints

    Hi Everyone.

    I have a problem with white lines / deletions occurring across all colours. If I print out pure cmyk you can see the white lines in every page in exactly the same position.

    To me...
  13. Thread: DC 242 toner

    by chrisio
    Replies
    2
    Views
    375

    Re: DC 242 toner

    Thanks. I thought as much. I have flushed 70% of an original toner through now. I will get another drum and a pack of dev and swap it all out.

    Lesson learned that it's more expensive to run the...
  14. Thread: DC 242 toner

    by chrisio
    Replies
    2
    Views
    375

    DC 242 toner

    Ok. I made the mistake of using a compatible yellow toner when I couldn't get hold of a genuine toner and I have ruined the drum I can actually see little hard particles stuck on the cleaning blade...
  15. Replies
    7
    Views
    911

    Re: Black toner drop down. Xerox dc 242

    Hi.

    Thanks for the help everyone. I haven't pulled the machine apart to clean it all down just yet as things are busy at the minute but since replacing both black toners with brand new ones the...
  16. Replies
    7
    Views
    911

    Re: Black toner drop down. Xerox dc 242

    Hi.

    Its definitely black toner - I will check the cleaning blade again.

    The only other thing is that one of the black toners is empty but still installed however I can't see how that an empty...
  17. Replies
    7
    Views
    911

    Black toner drop down. Xerox dc 242

    Hi.

    Recently started to get noticeable black toner drop down on prints and copies.

    I have vacced out all of the toner around the dev and drums. Replaced the black drum and dev unit. Cleaned...
  18. Thread: DC242

    by chrisio
    Replies
    3
    Views
    548

    Re: DC242

    Hi.

    Apologies for the lack of information.

    can you point me to the section of the service manual that covers this problem please?

    Thanks
    Chris
  19. Thread: DC242

    by chrisio
    Replies
    3
    Views
    548

    DC242

    Hi.

    I seem to be suffering from thick 300gsm glossy paper slipping in the machine so that the front to back registration is varied from sheet to sheet. There is a permanent skew which is constant...
  20. Replies
    1
    Views
    424

    [CQ] Re: Xerox DC 242 Toner drop down

    Never mind - It seems to be related to the new drum I installed at the same time - swapped the drum for the old one and the problem disappeared within a page or 2 and has not reappeared in over 500...
  21. Replies
    1
    Views
    424

    [CQ] Xerox DC 242 Toner drop down

    Hi All.

    I had to replace the magenta dev unit after the seal failed and blocked the dev unit ever since then I have been getting spots of magenta drop down scattered across the page - I thought...
  22. Replies
    10
    Views
    1,190

    Re: Xerox DC 242 Compatible Toner

    Ok - Just checked my magenta toner that is in the machine and the part no is 006R01451 I "think" this is a non metered toner - am I correct? If I am what will happen if I put a metered toner in...
  23. Replies
    10
    Views
    1,190

    Re: Xerox DC 242 Compatible Toner

    So - Carrying on from this then - what is the difference to my machine for metered or un metered supplies? How can I tell which I have?

    Thanks
  24. Replies
    10
    Views
    1,190

    Re: Xerox DC 242 Compatible Toner

    Thanks everyone. It's clear that on these machines compatible toners are a no. I will just keep my eyes open on eBay and buy them up as and when they are a good price.

    Cheers
  25. Replies
    10
    Views
    1,190

    Xerox DC 242 Compatible Toner

    What are the thoughts on running the above machine on compatible toner? does it work ok with the same colour etc or is it one to stay away from at all costs?

    Cheers
    Chris
Results 1 to 25 of 96
Page 1 of 4 1 2 3 4